Amazing Corners with a Corner Trowel
ฝัง
- เผยแพร่เมื่อ 17 ก.ค. 2024
- In this video we are discussing how you can get perfect corners, using a corner trowel. When the best time to use it, to get the best results.
 #plastering #rendering #alexmorley #refina #nela #marshalltown #oxtools #sandandcement #traditionalrender
Hultafors Talmeter
amzn.to/3J6HLSZ
Delphine Knife
amzn.to/3r093Ez
Working Platform
amzn.to/3JccdLH
Dewalt Drywall Gun
amzn.to/3uZyzL5
Empire T-Square
amzn.to/38k3QRk
Follow us on
Instagram
@plastering_alexmorley
plastering_...
Facebook
@Alex Morley Plastering
m.facebook.com › alexmorle...Alex Morley Plastering
Subscribe for more content on Plastering and Rendering
The hop ups we use are Werner Professional Work Platform
www.wickes.co.uk/Werner-Profe...
Delphine Knife
Blue Delphin Carpet Fitters Dolphin Knife With Holster www.amazon.co.uk/dp/B00QAS8K3... - แนวปฏิบัติและการใช้ชีวิต
If you would like to support the channel you can make a donation HERE👇
www.buymeacoffee.com/alexmorley
Nice al 👍. You stuck it on rough deliberately. Alex and Blaine gray are the best plastering vids on TH-cam. Taking time to show beginners, adding time to their day.
😂😂😂 I wondered if someone would notice that. Yes I did keep it rougher than normal to simulate very rough corners so those watching could see what was possible. Well spotted. 👏👏👏
Thanks for your support on the channel.
Thanks so much for this video! Finally a good explantion not only on when, but also why this way. Thanks again!
Those Werner platforms are a god send.
Just what I've been looking for.. thank you... very detailed
Yet again another cracking vid, with good tips 👍
This channel is so under-rated 🔥 👌🏽
You've helped me so so much. I'm starting next week with plastering my lowered ceiling. It runs throigh the entire living-, diningroom and kitchen. Its about 20 square mtrs. I've never plastered before, but with your tips and tricks and all basics im confident enough to do it like a pro: you. Much respect Alex. Cheers m8.
Very informative, thank you great video
thank you for the knowledge
Great tips boys awesome 👍
Why wasn't I told how to straighten my corners like this when I was learning how to plaster. Fantastic! This is going to help me a lot.
well after 30 years of plastering and using thr ragni since they came out ive allways done straight away then at the end. I will be trying this tomorrow im on the first of 68 units! thanks never too old to try it different.
Good video! Thank you.
priceless advice. i wouldnt have had a clue. i am thinking of adding a corner trowel to my kit theres an ox dealer near near me but will check the ragi. thanks for the tip!
Great video
Just got myself the nela 103° what a little corner trowel that is well worth a go
Really nice job, nice video..
Thank you.
Won't lie I always use it after the first coat. Then as you do from Then on
Informative as always mate 👌🏼 can’t wait for my trowel 😉
No it’s my trowel😂
Glad you noticed the trowel made an appearance in the video. 🤌👌
As for getting it straight that's really down to the backing really
I have always found I use it at all stages of the skim yiu have something to work into then just take the line out that the trowel leaves
Quality
Another great video buddy.
I've noticed in this video and your Float and Set video, you really got the lighting spot on to show what you're doing. I feel like this was missing a little in your timings video. I think it was so bright out and your camera was aimed at it, so it made the walls appear dark, so it was more difficult to see what you were trying to show the plaster should be for each stage.
Is it possible you could make a new timings video in future with a huge LED light pointed at the wall? I know it's part of the TH-cam guidance to reupload similar or even identical subjects over time to help growth, even though you've already done vids on it.
And can you show us sloping corners in old house
Hello mate Today for the first time I found something like nylon fibers because that's what you can explain to me, please, your work is very cute I like it very much, thank you for your videos
Best corner trowel I've ever had. Good price too. Make sure the apprentice don't let the lugs dig in. It will infuriate him. Haha 😂
I follow that general rule and I flatten my wet corners like that kind of not exactly the same but good technique nice an square
Cracking video Alex....Could you do a video on the correct way to dot and dab a wall were the patio doors are like the 1 in the video...And also to dot and dab around a window wall.Thanks.
Figure out a way of using a laser. Its a game changer.
What is closing in the plaster?
Just had a bathroom plastered and the corners are absolutely terrible.
Now means I can't paint it as it is and needs a ton of rework to make it nice. thankfully I have a dry wall sander and a 1/3 sheet sander. Bad corners equal a ton more work to get it nice
Hi, another great video as always. Is there any chance you can do a video of patch repairs on plasterboard ceilings?
What sort of repair are you looking for?
@@AlexMorleyPlastering Anything ranging from water damage to accidental knocks? As a trainee plasterer, I still haven't come across this job and it would be great to see you do a demonstration as you explain things better than anybody else.
Grey video 👍🏻
Given the choice of working to a wet angle or a dry which would you choose?
Personally I prefer wet corners. You can put on more m²
Hi Alex so before and after first wet trowel only? Do you brush angles before twitching or dry? And one more do you know the rag I angle, looks like 90 compared to marshaltown which is 103 and digs a bit?thx
I don’t use the corner trowel until the closing in stage of the second wet trowel.
Any sooner you are disforming the corner. Pretty sure it’s the 103. And I only use a small brush after the second twitch.
@@AlexMorleyPlastering different to wat video says m8 I’m lost
Jeez, give it a clean 🤣
No time for that. 😂😂 need to get a new one. That one is knackered.
90 degrees?
Isn’t easy doing it with your fingers?
Plugging Ragni aswel haha
Do you know why it’s called a twicher
Sharpe
Best to leave till last minute to avoid taking gear out of corners
Australia is still on plaster?
Plaster is superior to taped drywall in every way, yanks just lack the skill. Plus im fairly sure hes british not aussie
Alex, Im interested to know your method of keeping a straight line on you sloped ceilings when you don't want them curved?
Exact corner tool or stop bead
@@israeladesanya4596 thanks for the reply 👍
Stop beads are a pain to fill in enough but keeps it straight
@@israeladesanya4596 I can see your a learner😂😂😂
@@anemone9895 your useless, had to come off the trowel because you were no good.🤣
you have to practice witchcraft to get good ceiling lines yours are awesome
Thanks for your feedback Duncan.
Can you describe your actions more please? Angles, pressure, texture, consistency, new tool issues, and any other technical description would help a lot. "Like that", etc just doesn't help and some of us aren't familiar with any of this. Better lighting and different camera angles would put you above the rest. Thanks
Get off your fat arse and give it a go until you get it right,you lazy lump.
Number one where's the frog tape around the new back door window's two don't need to brush corners in at end if finished properly Number 3 not a bad job!!
Making your life so much harder 😪 if your good only need to use corner trowel on the last part before wet trowel easy 😉
No it’s not dry 😀
If you plaster and finish all ceilings first then plaster and finish opposite walls your never need a twitcher or corner trowel .
Loads better using a corner trowel
First keep clean your corner😄😁😄😁
Anyone who uses a speedskim needs a corner trowel. Millenials eh!
A corner trowel/twitcher ?? ..... Cross-Grain and Middle-Finger .... Just Perfik ;-)
😊 won’t have much of a finger left if your bashing 100+ m² a day on for a week. 🤦♂️🤦♂️🤦♂️
@@AlexMorleyPlastering AAHHH! the calous soon forms don't worry, like the burns on the back of your hand when using lime-mortar 👍😎
Carpenters don't like them so neither do I. Skirting boards don't fit right.
What do you do?
@@israeladesanya4596 Plastering for 20 years now I'm a bathroom fitter wear and tear. Why? What do you do?
@@israeladesanya4596 🤫
@@anemone9895 I'm a plasterer, what has a corner trowel got to do with a skirting board?
@@anemone9895 you already sound like one of them that leave big clumps of plaster by the skirts
It’s called the toe and the back end is the heel,and by way the your mate in the background is a waste of time,stays in the same spot to long, move on .
You mean the guy that has just had an operation for brain cancer and is fighting for his life?
I will let him know your thoughts when he wakes up. 👍