Tyre & Mousse Fitting With Multiple Rim Locks | HOW TO WITH STAN
ฝัง
- เผยแพร่เมื่อ 20 พ.ค. 2024
- Here it is, My First How to Video. With Billy being injured I have some spare time to show you guys a couple of things in the workshop,This week I go through my preferred way of fitting Tyres & Mousses with multiple rim locks.
I hope this video makes things a little easier for you, Enjoy!
Go Check out these Guys for all things Tyres:
endurotyres.com/?gad_source=1...
What else do you want to see? Comment below
👍 Don't forget to LIKE, SHARE, and SUBSCRIBE for more!
🔔 Turn on notifications to stay updated with our latest videos! - กีฬา
![บุกร้านไอศกรีม VJ วุ้นเส้น !!!! [ดูคลิปเต็มหน้าช่อง] #Short | PANG ORNHIRA](http://i.ytimg.com/vi/g549nEhKZdc/mqdefault.jpg)
This is the way I mount my tyres for a while now and the easiest way to do it for sure.
PRO TIP: At some point in the process I will take the heaviest of my irons and smash whatever is nearby. The tire eventually goes on. *Your results may vary.
The best tire video of all time, Stan The Man!!!...Thank You Very Much!
We need a general maintenance video! It would be great to see what a factory mechanic does after every ride and what to look out for
Killer video, keep the shop tips coming!
Brilliant mate you could make a living doing this🥴
Keep them coming pal.
Best name for the channel! Absolutely awesome!!
Well done Lee. Very informative!
Yes stan… I want to know more about what it takes to be a successful machinc to the elite rider! The success behind the success 💪
How to set up the sag stan ! Billy will love it
hey Stan, cool video!
it would be cool to see what little factory tricks do billy or manny have on the bike. like the handlebar setup, wire harness setup, the safety wire in special places, hose protecting coolant hose etc. all those little tweaks that make the bikes unique.
thanks!
You’re the man Stan! Hope your channel grows fast
How to videos from Stan are what we want. That just earned you a subscribe and like
Best tire change vid I seen and I was on the Ark with Noah.
Great vid Stan. Cheers
Good thumbnail and channel's name 😂😂😂
Awesome content again lee better than the grumpy two others mate 👍🏴👍
Thanks for the tip re blocking the air. That's me sorted for the next change. 👍
Great content Stan!!
Good tips them Stan! Looking forward for the next tips mate!
Stop on that Stan some good tips cheers keep them coming
Great video Stan
Awesome tips Stan ❤
Perfect timing, I need new rubber
Moreee 😍😍
Brilliant!
Brilliant young Stanley Top tip
top tips on this vid 👍
Keep on with the video's used to hate doing mousses till I used the rabaconda so easy with proper kit
Cheers for the vid mate, liked and subbed
Good stuff Stanley!
This channel is mint Stan. Thanks for this info bro I never thought about using more than two rim locks before
One of the worldsbest,friendliest and smartest mechanics in the paddock... Cheers bro💯🫡👌🏻
This is wat I need cheer mate 👍🏼
Awesome man thanks
brilliant stan your blogs are so cool loved the last one at cymthig hill with you and the whole family i didn,t realise you had so many kids stan and on top of that you got to try that bolt bloke happy too. i used to race at cymthig on the wednesday evening motocross they have there.
Amazing, keep it up 💪
Yup this was good mate, look forward to learning some more top tips mate 👍🏼👍🏼
Thanks Stan great tips. I just started using 2 locks on my Enduro medium. I ended up using a old valve stem that I leave in to put my tire on to the need.
Learning new shit, Thanks
That’s also very good to do
Grazie Stan
Great thanks, if you ever do a maintenance course, I'm in.
Awesome love shop tech videos…..what’s next
Nice one Stan the Man!
Fork maintenance, Oil replacement etc?
Any tips on fitting the lower steering head bearing if you don't have factory tooling?
Keep up the vids 👍
Love it! Crank change next please 😂
Stan, good job 👍🏼
What’s the reason behind more than 2 rim locks? 8 seems crazy! More videos like this bud
I’m Guessing when there running a soft extreme mouse and super soft extreme tire on rocks and riding extreme stuff the tire pops off. I’ve had it happen with 2 an extreme mouse and medium tire before.
Well done sir! Very educational. 5/5
Do a video of a tyre change for us poor people who don’t have a rabaconda. Go full bush mechanic.
Fantastic video Lee. Thx
Probably a lot easier to do if you don't have some doofus sticking his finger in your ear. Thanks for the video!
Very true!
good job bud
Awesome video. Easy way to change footpegs would be great.
Thanks! Plenty of workshop videos in the pipeline
How do you go about drilling the holes for more rim locks? (Spacing on the wheel?)
Where's the ONLY STANS merch at!?!
Good vid ❤ I wanna see 9 rim locks the moose must be small
We can call it the 999 emergency 🚨 grip required
Great tips stan thanks, I know the mousse system is the most popular for hard enduro but do you ever try other systems in your tyres and do you ever have to alter the tread on tyres ?
Brilliant Lee, keep blogging,, will press subscribe button!
Dawn to Dusk is coming" would any of the lads have a go for fun?
Maybe you and Ed could team up?
😂
Regards
Steve
Great vid Lee, one question to lube the moouse do you just lube inside the tire before you mount it?
Stan… do you only need more than one rim lock if your running under sized or heavily drilled mousses?
Yes mate exactly that
5+ rim locks! Is that more to keep the bead set when using a small/soft mousse, or is it to stop the tire spinning on the rim?
More to keep the tyre on the bead
YES! Keep em coming! Why do the pros use so many rim locks? Does it really come down to tire still slipping on the rim even with a couple of them? Or is there another reason why? 🔥
They’ll be using much softer mousses (drilled etc too) than most.
I run three run locks, but that’s because I’m a fat imbecile running a 120 mousse in a 140 Mich medium tyre (nice and squidgy and grippy)
For extreme we have to run the mousse very soft so we use a few rim locks to stop it spinning and also to keep the tyre on the bead
8:45 WTF. FFS. MF'er! years Stan... years I've been arguing with setting the bead! Not your average tire change video right here.
We'll miss you guys in Canada this year, hopefully Outliers and Bill are good to go for 2025!
1st
Stan i ride a tc250 22 the subframe is lower then ktm how do i feel like am sat on top of the bike rather then into it. Taller seat higer footpegs???
can we have a rear wheel bearing change please
what is this machine, what is it called and where can I buy it ? please
It’s called a rabaconda you can get one from enduro tyres
what is the purpose of multiple rimlocks?
To keep tyre on the bead and to stop spinning
Are you not Billy’s Machanic anymore
Yes I am mate just he’s injured at the moment so had some extra time on my hands