First Plowing with the John Deere 5045E! I was very impressed.
ฝัง
- เผยแพร่เมื่อ 19 มี.ค. 2023
- After years of only turn plowing with a Massey Ferguson I finally gave a Deere a try. It did good but Massey good!
#johndeere5045
Email: khtractors@gmail.com
mailing address:
261 Little Caney Ridge
Coeburn VA, 24230 - ยานยนต์และพาหนะ
"Hey, err'body..." Good words to hear after clicking a link. It's been a rough eight days, but it's nice to sit down and just soak up some tractor fun. Thanks for being there!
Sorry you’ve had some rough days, hopefully all is good now! Thanks for watching
I enjoy seeing and as well using a turning plow rolling over the dirt I have a two bottom on my old 240 Massey Ferguson I purchased new back in 1993 I’ve kept it all these years it’s hard to let go of a goodun so I reckon it’ll be with me for a lil while longer, thanks for the video , God Bless
Definitely keep the 240! Thanks for watching
I have that exact same tractor parked outside. Great video - you've talked me into getting a plow :D
That's awesome!
Started plowing with Dad when I was in 7th grade. Even played hooky a bit. Dad ran a 450 FarmAll and a 3-16 plow with hydraulic lift. I had an M with a rope trip 3-14. We spring plowed 100 to 150 acres a year, mostly manure covered corn stalks to be planted to soybeans. Great fun as long as the stalks and manure didn't plug the plow. Beautiful flat Iowa soil, but we had to turn around and disc and harrow it as soon as we were done to benefit from a rain and win the war on clods. Progressed through a 706, 806, 966, and finally a 1086 with a "hyra-wide" DMI 5-bottom. Glad you're enjoying the Deere. I am also looking forward to hay season, but we still have 6 feet of rock hard snow drifts in the yard due to rain events followed by spells near zero degrees. Manure hauling has worked in areas of the field that have melted down a bit.
I appreciate you sharing your experiences. Glad we don’t have snow on the ground to contend with. Thanks for watching!
Good Evening Sir, plowing that field is way more better than plowing snow 👍👌😇 Great JD tractor action Sir and you weights did their job prrrrretty Good 😇👌👍💪 Have a safe week Sir Cheers 👍👍👌👌😇😇🍻🍻
I did miss getting to plow snow this winter. Thanks for watching
Nice work, Ben. You got a lot done. 👍🏽👍🏽🤠🤠 3/21/23
Thanks 👍
John Deere is an excellent machine. The Tractor did a great job. I love my John Deere that’s for sure great video.👍
I’m thinking it will be a nice all around machine. Thanks for watching!
That little John Deere is getting it done. It seems to be a great little tractor
You got that right! Thanks for watching
@@khtractors you're welcome
Great video Ben. I sure enjoy seeing dirt roll either off a plow or a rear blade
You and me both! Thanks
Looks like the John Deer did did a fine job, plowing was probably my favorite thing to do back when we had the two cylinder popping Johnnies, of course we pulled a 2 12 inche bottom Oliver plow pulled on the draw bar, eventually we had a 730 that pulled a John Deer 3 16 inche lift plow, and then a 4020 doing the same, quite a difference, but I learned on the A ,G,and 730 old school, I enjoyed the video!!!
Enjoyed the comment! Thanks for watching
Good job by the tractor and operator.
Thanks 👍
great video!Thanks for sharing!:)
Thanks for watching!
Another great video Ben! The tractor did a great job plowing. It’s hard to believe it’s that time of year again. Have a great day.👍🏻
Thanks, you too!
John deere did good glad to see it time plow 👍great video
Thank you for watching!
You and that tractor did a great job!!
I think so too! Thank you!
I like plowing with my John Deere 5200 which is the older equivalent of yours and I pull a 3 bottom ford plow and it’s does great. Lord knows you’ll pay this day in age for new points and landslides!
Thanks for sharing! Appreciate you watching
You have the draft control set perfectly. How can I tell? Not just the low end engine torque but the tracks the rear tires are leaving. The ground is just slightly moved by the bars. It indicates the tires are getting their maximum bite with the implement draft and machine ballast. Great job and the tractor is doing fine. The new Deeres like yours sense implement draft through the top link, just like your Massey does. Thanks for a great video-that’s one huge garden by the way.
Hey thanks so much! I can tell you have experience plowing!
Ben, I thought the JD did a really awesome job and yes I can’t wait to see it in the hay field but I really don’t see you have any problems with it there either for the side and HP I believe you go a winter God Bless 😊 and take care till next time
I’m feeling good about it! Thanks for watching
I like B/2 on my JD 5400. I end up using it a lot for the same reason you mentioned, reverse is right behind it.
It’s a nice setup to not be a shuttle transmission. Thanks for watching
How's she goin'? I think the new tractor did pretty good on the plowing. Looks like you nailed the set up right off the get go!! Nice. Take care!!
I had it preset from my practice run the day before. Didn’t want to look like a fool in public. Thanks for watching
Yes the John Deere did good looks like!! It’s still a little too wet right now to do any plowing here, but will in the next few weeks!!
I’ll probably be plowing a lot in a few weeks. Thanks for watching
I have gotten great service out of the two John Deere''s I have owned. Hopefully the 5045E will prove out to be as dependable.
I hope so too!
Ben..You have noticed how close the gears are ? . Have to get a feel to get into right one. My 5055e is ready for pasture spaying. Enjoyed video
They are close, it’s taking me some gettin use too! Thanks for watching
Looks Great Ben......I think it is a great plowing tractor. Also, is that an old cantilever Barn in the background sitting back on that hill across from where you at?
Yes there is one there, it’s very old barn. Thanks for watching!
New Deere getting it done🚜🪵👍🏼🇺🇸
Sure is! Thank you!
You and the Deere did a great job plowing! I like the low RPM grunt that engine has. Doesn't sound like the 245, But good in it's own way.
Nothing beats that 245 sound, I get more compliments on it then any other tractor. Thanks for watching!
Excellent video - no problem plowing with the JD, however, the MF hat...😎
The Massey hat makes everything go better! Thanks for watching
Ben, I'm running a MF135 and tried plowing for the first time a few weeks ago. It's just an old single bottom but I struggled to really get it tuned in. The ground is plowed but could be better. Any recommendations on getting it dialed in?
First of all not all plows are created equally. Some just will not roll dirt over good. Big things are to have a good sway bar so the plow can’t swing and have it set to run just inside your right rear tire. Thanks for watching
Is this a hydrostatic transmission on the JD kinda sounds like one.
Gear drive.
I just picked up a 2 bottom plow to break ground for my daughters garden and mine.
I have a Zetor 3320.
Any suggestions for a newbie?
Pitch the points slightly to the left facing the rear of the tractor then adjust the top link so the front plow is just barely in contact with the ground before the rear. Thanks for watching
@@khtractors thanks I’ll give it a try.
you think that 5045 would pull a 3 bottom?
I do believe it would in most situations. But I’ve never used a 3 bottom to know how much harder they are to pull. Thanks for watching
Go get that cab tractor , you only live one time.
I’d like to be married only once also. So I’ll hold off on the cab until I go big on TH-cam or as a retirement gift to myself. Probably reach retirement first. Thanks for watching!
Well if you were impressed with that Deere imagine how impressed you would’ve been with a Kubota!
I don’t like plowing with the Kubota much. The old Massey’s are #1 on draft control and the Deere is a close 2nd from anything I’ve used. Thanks for watching
You would be plowing mud here
It’s still dry since I’m back in 2022.
Those new John deere tractors sound terrible
Glad you like it!! 😁
He’s running a low rpm to control his speed. The sound totally smooths out from 1600-2200 normal rpms. Sound’s totally different at those rpms. It’s same motor they’ve used for 15 years or more, great motor