Great review. I was going to get one of those $100 Chemical Guys Foamer, but it appears that does the job as well so I will try. It’s only $20 bucks. Thanks
Worth the 18$. Especially if you like to presoak prior to washing by hand or if your car is coated with ceramic coat or wax, it’s a good touch-less maintenance washing system.
The pressure adjustment is in the handle. Depending on how far you depress it. Thanks for your video. Just used mine for the first time after watching your video.
It works okay. I have only tried it with Mcguiar's Gold car wash. There must be a better, more concentrated soap out there. The stuff you used looked like it worked slightly better.
I have the same foam blaster and when i engage the sparyer it keeps losing the jet then it jets again do ya know why basically cannot get a steady strong stream
I’ve noticed that if you pull the trigger on the actual sprayer provided 100% it doesn’t shoot out with pressure as strong as when I only pull the trigger 70-80%. These are cheaply made, so you could’ve gotten a bad unit.
I returned mine. They are all sloppy fitting at the quick connector for the tank. The tank fills and it wobbles around loosely from the weight. Very cumbersome. I don't see one of these lasting very long before the quick connector breaks or starts leaking.
I’ve been using mine with the same description you are mentioning for well over 2 years. Probably a little more resistant than you think although I do get your point. But it is a very low cost item, so I get you on the feel.
Yeah the screw adjust how much you need to pull the trigger for X amount of water flow. Similar to any garden hose. If you over tighten the screw it will spray water without you having to squeeze the trigger. Or if it’s too loose, you could pull the trigger and the water will barely come out.
![กี่หมื่นฟ้า | Your Sky Series EP.1 [1/4]](http://i.ytimg.com/vi/vLGjxFL6U_I/mqdefault.jpg)
Thank you for taking the time to make this video! God bless!
Great review. I was going to get one of those $100 Chemical Guys Foamer, but it appears that does the job as well so I will try. It’s only $20 bucks. Thanks
It’s worth it to me. With 4 cars total between my wife and I, it makes maintenance washes super quick and easy.
Me too lol
Same here with Chem Guys one. The one I wanted is $50 but screw that. This is good enough
Thanks for the review bro was looking for a cheap soap sprayer
Worth the 18$. Especially if you like to presoak prior to washing by hand or if your car is coated with ceramic coat or wax, it’s a good touch-less maintenance washing system.
Ty for this gnna start detailing motorcycles and cars and this helps my budget
Going to get one today. Not sure how I never seen it when I’m there weekly it feels like. Thanks.
Good luck, hopefully you can get it.
The pressure adjustment is in the handle. Depending on how far you depress it. Thanks for your video. Just used mine for the first time after watching your video.
Thanks for sharing
Watched this this morning and went to get one and it was the last one they had
Awesome buying one today.
Foam nation, baby. Let's go!
It works okay. I have only tried it with Mcguiar's Gold car wash. There must be a better, more concentrated soap out there. The stuff you used looked like it worked slightly better.
I used mr pink but most foam cannon soap may have better results. This won’t compare to an actual pressure cleaner attachment.
Have you tried more soap to water ratio for more foam? Or is this really the max it gets?
I’ve only tried one type of soap, but at different ratios, it still produced the same foam.
@@Saldalaperformance just bought it today going to try it out tomorrow. I also have a Camaro, do you use any kind of wax?
@@euegeueg3568 I use hydroslick from chemical guys.
Gonna go get one tm and detail my girls car
I have the same foam blaster and when i engage the sparyer it keeps losing the jet then it jets again do ya know why basically cannot get a steady strong stream
I’ve noticed that if you pull the trigger on the actual sprayer provided 100% it doesn’t shoot out with pressure as strong as when I only pull the trigger 70-80%.
These are cheaply made, so you could’ve gotten a bad unit.
@@Saldalaperformance Ill try the it Thanx for the respons
I returned mine. They are all sloppy fitting at the quick connector for the tank. The tank fills and it wobbles around loosely from the weight. Very cumbersome. I don't see one of these lasting very long before the quick connector breaks or starts leaking.
I’ve been using mine with the same description you are mentioning for well over 2 years. Probably a little more resistant than you think although I do get your point. But it is a very low cost item, so I get you on the feel.
Sick
I bought this and it doesn't spray foam at all. Using maguiars. Tried with dawn and still doesn't spray foam. Straight water
Might have a defective unit. I have been using mine for months and I’ve had no issues.
Do you know what the screw on the handle does and where should it be set?
Yeah the screw adjust how much you need to pull the trigger for X amount of water flow. Similar to any garden hose. If you over tighten the screw it will spray water without you having to squeeze the trigger. Or if it’s too loose, you could pull the trigger and the water will barely come out.
Add water 1st. Good video
Not buying it,no fan adjustment?
The nozzle does not have adjustment but the amount of pressure you pull on the sprayer handle can vary the pattern you see.
Why does mine spray without pulling the trigger?
There is a screw type of adjustment that can be done on the back of the hose nozzle. Adjust that and see if it can resolve the issue.
@@Saldalaperformance i did that right after commenting. Thanks for the suggestion it worked
What cleaner can be used with this tool? Looking into 1
By cleaner, do you mean soap? Any chemicals guys or Adams products work well in my experience.
@@Saldalaperformance Yep
Rubber washer my friend not grommet
Hoses use rubber grommets. Just Google it.