Thanks a lot for this very clear and detailed tutorial. I have a Mantis Pro on order so this will be very handy in the future I’m sure. Would love to see a review of those new hybrid tyres on and off the road if you get the chance.
The Allen screws on my were insane tight and had thread locker on them. I stripped two of them and had to weld my Allen wrench on to them to get them out. Terrible idea from the factory.
Brilliant and informative video man....thanks - how do you find the hybrid tyres? Ill change from roads to these in a few weeks, wondering what you think? I didn't want full off road tyre so got these also
Hi Tim, thanks for the feedback. We would definitely recommend the hybrid tyres. Basically we didn't notice much (if any) drop in performance while on the road, but did notice a significant increase in performance when taking them off-road....so it seems like a no-brainer to us! Cheers
What size Tyers are they, cause I got told by the scooter place that I can’t put off-road Tyers on? Even though in the Controll settings, it has 2 different Tyers sizes🤷♂️🤯
I've got the kaabo mantis 10 duo, I have the stock 2.5 road tyres, if I upgrade to the 3" tyres do I need new extended fenders or anything or is it a straight swap?
TY!! if you remove the right arm (only two screws), it is much easier
Thanks a lot for this very clear and detailed tutorial. I have a Mantis Pro on order so this will be very handy in the future I’m sure. Would love to see a review of those new hybrid tyres on and off the road if you get the chance.
I find it helps to have a little pressure in the inner tube to stop it getting trapped by the rim.
Thanks ES - will try this next time. Cheers
Rub babt powder on tube before reinstalling to help prevent pinch flats. It allows to tube to slide about rather then stick inside.
I'd also put a little blue loctite on those wheel motor hub screws... just in case.
Yep, this is a good tip - agree with this. Cheers
Thank you.
thanks bro
The Allen screws on my were insane tight and had thread locker on them. I stripped two of them and had to weld my Allen wrench on to them to get them out. Terrible idea from the factory.
mine too... I ended up buying a 450mm breaker bar. was very easy with that.
Can you put these 10x3 ones on the Kaabo Mantis Solo? Or only the pro? Are the tyres different or just number of motors
bro my motor doesnt move after removing 6 screws. help me plz. 4:13
U removed the wrong screws or didnt pull it hard enough
@@Maykay1312 i solved it by hammering flat screwdriving between the rims. it was really stuck.
Brilliant and informative video man....thanks - how do you find the hybrid tyres? Ill change from roads to these in a few weeks, wondering what you think? I didn't want full off road tyre so got these also
Hi Tim, thanks for the feedback. We would definitely recommend the hybrid tyres. Basically we didn't notice much (if any) drop in performance while on the road, but did notice a significant increase in performance when taking them off-road....so it seems like a no-brainer to us! Cheers
👍
Question what if you have a tubeless tyre?
Then you won't need a tube
What size Tyers are they, cause I got told by the scooter place that I can’t put off-road Tyers on? Even though in the Controll settings, it has 2 different Tyers sizes🤷♂️🤯
They are 10x3 - kudosgear.co.uk/collections/kaabo-parts/products/10-x-3-hybrid-offroad-tyre-for-kaabo-mantis-pro-mantis-10
@@kudosgear773 thank you 🤙👊
I've got the kaabo mantis 10 duo, I have the stock 2.5 road tyres, if I upgrade to the 3" tyres do I need new extended fenders or anything or is it a straight swap?
It's a straight swap on the Mantis 10. Cheers John
Nice
👍👍👍🙏🙏🙏
i hear there is anlot of problem on mantis after 500mile
what is the air pressure of the tire (8.5 inch)?
yes its true
I rode my mantis pro for 1,600 miles already. No issues and no flat tires yet!