THANK YOU SO MUCH. i was having a hard time scaling my plates these past few months since i couldn't find any tutorial video with clear explanations, yet i'm so glad I find this
So, our CAD subject starts next week (Wednesday) I'm just here to see if I can learn some basics before entering a war 😇👌I love your work space, and thanks for the tips on how to scale
bro thank you so much, i have always found scaling so confusing but you literally just taught me. other youtubers complicate the whole thing, now i hane no issue with scaling on autocad
Sir tinuturo din po ba ang ganyang mga software's sa college? At anong year po mag sisimula pag gamit nyan, manual palang po kasi ako marunong sangayon balak ko pong mag archi next year.
Please make a tutorial about perspective points with difficult house models :( Other youtubers are hard to understand but hopefully I'm learning from you :D. I've watched your previous videos and I learned a lot! I am looking forward for your next videos :)
architect, just a question. anong template ang ginagamit mo before ka magstart ng drawing? is it metric mm or imperial inches? like dito sa video mo? what template po ito or units na ginamit mo? hopefully mapansin ito
GREAT VIDEO MAN!! I'm still hoping for a video on how to get the proper proportions in perspective :(( but anyways great video and very helpful!!! Flying peace!!!
This is a good tutorial video. Ive graduated already. And ive been working as an apprentice. But im so scared to ask our boss about scales. Because honestly. I passed my exams based on nerves only 😂. Ive been figuring out scaling on paper space. .and im not quite sure with the results. .so my drawings is really questionable. .im always scared if my boss would take out his metric scale and measure my prinouts. .these one feels easieeer. . .and looks easier. .❤ its funny but i think this is a very common problem and one of the things arki peeps would search for hahahaha. .including me.
Llyan i can't get my paper size and printable area to match up and i've copied exactly everything you have done. What am i doing wrong? It comes up with paper size: 420 x 297, but prit rea is 410 x 263. If i click fit to paper, underneath comes up with 1mm= 56.46mm automatically? And if i unclick fit to paper and put in scale 1:50 it still comes up with the same margin! So frustrating.
I swear the Layout tab is the bane of my existence. Spent two hours trying to put plans on paper the proper way through layouts. Nothing works. Thank you for showing me it's completely fine to just stick to the Model tab lol
I can help you to do your layout by easy way: if you draw by: Mlm just put the scale in page setup 1/1 Cm 10/1 M 1000/1 then you can change your draw in view port with any scale you want it Ex:( 1/100 or 1/200 ..... etc)
Goodmorning sir ask ko lng po sana ma pansin nyo. Practicing Draftsman po ako. Tanong ko lng po. I have a house plan with 10x10 meter Sinubukan ko 1:100 pero sobrang liit na ng drawings. A1 nga pala size ng paper. Sinubukan ko rin po 1:50 halos kalahati rin sa laki. Sana po maka reply kayo. Nga pala. I subscribed to your chanel because of thoes good content. Marami kaming natututunan sa inyo. GOD BLESS!!😄
Saint Louis University, whichever school is the most convenient, but usually schools in manila are really good:) SLU is my favorite tho, cause that's where i came from haha!
Commonly BS Architecture 5yrs at meron din architecture na 4years lang pero di ka qualified mag board exam if sa barko meron Naval Architecture. If mas gusto mo magfocus sa interior lang there's AB and BS interior design.
Good day po. Pano po kung yung dimensions ko sa drawing are in meters.. kailangan ko rin po ba e convert ang dimension example A1 into meters? Print scale po kasi naka lagay lang ay inches or millimeters. Salamat po.
You're good in sharing tips and techniques to other I salute you bro keep it up God bless and more blessing to come!! Btw incomingarki student ako hehehee
What unit set-up you use when you draw? Is it in meter unit? I see when you draw a straight 8.5x11 size looks too small compare to the bed shown on workspace when in fact the bed sizes is like 2 meters lenght, how can a number 11 is too small compare to number 2, im a bit confuse
Hi sir llyan 😁 ask ko lang po if you can teach us about Revit kahit basics po.... isa po kase ako sa di alam mag revit at gusto ko matutunan. Thanks po More power po sa channel nyo and thanks po sa lahat nang vids ♥️
Ask question again sir. What if my drawing Units is Mtr. And my drawing is mtr also, Then i want to put my drawing in that same your way to plot it but it is set into mm. How i gonna do that? Tnx!!
In certain occasions it is, like when you need to print just one page. but when doing plans that require repetitive title blocks and pages, using layout is faster:) It just depends on what you're printing.
Sir I want to ask something and need some advice. Ubos na po kasi ang slot sa school na napili ko ng BS Architecture and Industrial Design yung binigay sakin. Okay po ba yun? Ano pong maa advice niyo sakin?
Check other schools kung may opening, or take ka ng industrial design for 1 sem, and check mo kung may mga same subjects sya from the architecture course:)
Dude... please explain about the line weights according to thicknes.. so that we can create our own template for regular and professional use for all the drawings.. coz it is not possible anyone to create every time for each file. Please..
Hello! I have a problem. Im trying to print out a 1km x 1km site on A3 paper. My model space for this site is 1:1 too. I tried your method to try to put it on an A3 paper (what was required of us in school) but the model is too big for the paper. how do i squeeze it in the a3 paper? i cannot use any other paper sizes since a3 paper is what is required to be used
When we print the drawing to the selected paper, the printer adds a margin. This makes the drawing shrink down so that the scale of the drawing ruins. How to correct this?
Hey, bro can u plz help me, how should I keep all new updates like in software, construction techniques, all News related to architecture and construction. Is there any app or any thing to do this
Hi! I have something to ask. I hope you will help. I am using layout in plotting. The bad thing is, having plotted the drawing at my desired size of paper, the preview of the layout in autocad is perfectly on center of the paper. But when I saved and opened it as PDF file, the drawing was off-centered. It was plotted nearly below the left side margin of the paper. Have you experienced this before? Thanks in advance to those who would help.
@@LlyanAustria Yes. Sometimes I use the model space when I print it directly and there's no problem with the margin. But same thing when I saved it as PDF file. :( Maybe I should use an updated version of cad??
Fantastic little tutorial! But I suggest reducing the level of your background audio a bit, or at least choose a more chill or slower pace music. I found it a little distracting while I was intently listening to your instructions which was a little on the fast side. Regardless, thank you for sharing your knowledge
How do I search for information? Whenever I search on Google or TH-cam for something, I have something else that does not relate to that thing that I want 😢😢😢
Kuya I got a question po sana masagot mo po or kung sinu man ang may alam. Im an upcoming architecture student or atleast thats what I want to believe Theres this artistic examination and achievement exam I need to take in order to pass but Im not really confident. Could you or can anyone tell my what are those or the coverage of the exams so that I can prepare. Im really nervous and really want to pass. Plss reply.
@@LlyanAustria Just wanted you to know I finally am a architecture student! Haha. I passed the exam and damn since it was ranking and not all students who apply will be able to be an architecture student so I was REALLY nervous! But Yay! Ps. I can finally use your videos for my student life in architecture.
You can scale me anytime in AutoCad baby! ❤️❤️❤️
How about no... haha!
@@LlyanAustria Is it because you want to do it in rl not in AutoCad ?
THANK YOU SO MUCH. i was having a hard time scaling my plates these past few months since i couldn't find any tutorial video with clear explanations, yet i'm so glad I find this
Llyan, great and simple way of scaling. Thanks.
Ahhh that's my problem like my whole lifetime. Now I know the techniques. Thanks brother! You're awesome
Glad i could help pal!:)
Good video! I love Autocad, this is why I created my channel to help more people.
That's great pal!!:) Keep doing what you're doing, you are a big help!
@@LlyanAustria Thanks for good wishes. Hope we can collaborate in the future. You’ll do great!
collab please!
So, our CAD subject starts next week (Wednesday) I'm just here to see if I can learn some basics before entering a war 😇👌I love your work space, and thanks for the tips on how to scale
Glad i could help!:)
Ohh my Gosh😍😍😍 thank you so much for this I've been struggling on how to plot my cad drawings for months now. Thank you soooooo muuuccchhh😍😍😍
You're welcome!:)
Perfect timing for this. Thanks!
bro thank you so much, i have always found scaling so confusing but you literally just taught me. other youtubers complicate the whole thing, now i hane no issue with scaling on autocad
Sir tinuturo din po ba ang ganyang mga software's sa college?
At anong year po mag sisimula pag gamit nyan, manual palang po kasi ako marunong sangayon balak ko pong mag archi next year.
Usually po 3rd year tinuturo yung AutoCad sa College.
Yup around 2nd year or 3rd year may AutoCad na subjects:)
kanina pa akong 7pm naghahanapng ways to properly scale my model and put it on an A3 size paper, sakto yung content mo
Please make a tutorial about perspective points with difficult house models :( Other youtubers are hard to understand but hopefully I'm learning from you :D. I've watched your previous videos and I learned a lot! I am looking forward for your next videos :)
Thank you for your suggestion pal!!:) I will add it to my list!
hi liyan really excellent method for scalling for print latout method is confusion but this method is faster than that thanks for your tutorial
Thanks for the very helpful tip master. Avid viewer here.👍
Your way is Great, and really it's fast, it works even if we don't do layout .. Thnx because you gave me new information :)
I like the way you deliver our videos.
Woah no comments ? Notif squad of arkis squad
Thanks for the tips kuya!!
It will be our topic next sy( our school starts at aug)
Good luck on your autocad classes pal!:)
mas madami pa ata akong natututunan sa youtube eh. hahaha thank you Architect Llyan!
architect, just a question. anong template ang ginagamit mo before ka magstart ng drawing? is it metric mm or imperial inches? like dito sa video mo? what template po ito or units na ginamit mo? hopefully mapansin ito
i think he's using inches, that's why kinonvert pa nya from inches to mm * 0:59
Really good tips and easy to follow! Thanks man!
GREAT VIDEO MAN!! I'm still hoping for a video on how to get the proper proportions in perspective :(( but anyways great video and very helpful!!! Flying peace!!!
Thank you for the compliments pal!!:)
This is a good tutorial video. Ive graduated already. And ive been working as an apprentice. But im so scared to ask our boss about scales. Because honestly. I passed my exams based on nerves only 😂. Ive been figuring out scaling on paper space. .and im not quite sure with the results. .so my drawings is really questionable. .im always scared if my boss would take out his metric scale and measure my prinouts. .these one feels easieeer. . .and looks easier. .❤ its funny but i think this is a very common problem and one of the things arki peeps would search for hahahaha. .including me.
thanks that u make such a big effort to create these videos ! i hope a lot of people will learn from them
You're welcome! Thank you for appreciating my efforts pal!:)
Llyan i can't get my paper size and printable area to match up and i've copied exactly everything you have done. What am i doing wrong? It comes up with paper size: 420 x 297, but prit rea is 410 x 263. If i click fit to paper, underneath comes up with 1mm= 56.46mm automatically? And if i unclick fit to paper and put in scale 1:50 it still comes up with the same margin! So frustrating.
Good explanation llyan still some tips of scaling plz show us
Sir pano po palitan yung units to mm? required po ba or you just draw the measurement na gusto mo?
Dwgunits select millimeter
VERY HELPFUL, THANK YOU!
I swear the Layout tab is the bane of my existence. Spent two hours trying to put plans on paper the proper way through layouts. Nothing works. Thank you for showing me it's completely fine to just stick to the Model tab lol
I can help you to do your layout by easy way:
if you draw by:
Mlm just put the scale in page setup 1/1
Cm 10/1
M 1000/1
then you can change your draw in view port with any scale you want it Ex:( 1/100 or 1/200 ..... etc)
but his way is very good and fast
Early!
I clicked your video so fast but the signal is only the hindrance! Another helpful tips! Thank you pal😍
Haha thank you for clicking it even though your signal is lagging haha!:)
@@LlyanAustria of course I will pal!
A guide video that I was desperately seeking last sem and learnt it by experience... Now people like me do not need to struggle like me
I struggled with this as well:)
@@LlyanAustria 😁😅
Thankyou for your tutorial mah dudues!
Goodmorning sir ask ko lng po sana ma pansin nyo. Practicing Draftsman po ako.
Tanong ko lng po.
I have a house plan with 10x10 meter
Sinubukan ko 1:100 pero sobrang liit na ng drawings. A1 nga pala size ng paper. Sinubukan ko rin po 1:50 halos kalahati rin sa laki. Sana po maka reply kayo.
Nga pala. I subscribed to your chanel because of thoes good content. Marami kaming natututunan sa inyo.
GOD BLESS!!😄
That is far a lot better and easier and faster to what i used to. Thank you lodiii 😄😉😍
You're welcome!:)
Kuya llyan saan po kayo nag aral ng architecture? And para sainyo po anong school po ang maganda para po magaral ng architecture?
Saint Louis University, whichever school is the most convenient, but usually schools in manila are really good:) SLU is my favorite tho, cause that's where i came from haha!
Hello po college napo ako next year architect po kukunin ko tanong ko lang may ibat ibang uri poba yung architecture?
Commonly BS Architecture 5yrs at meron din architecture na 4years lang pero di ka qualified mag board exam if sa barko meron Naval Architecture. If mas gusto mo magfocus sa interior lang there's AB and BS interior design.
Yup @Marc Ferrer is correct!!
*Bachelor in Graphics Technology Major in Architecture (4 years)*
I really like the way you explained I did actually same as you but my scale not match with print scale what is the reason
Good day po. Pano po kung yung dimensions ko sa drawing are in meters.. kailangan ko rin po ba e convert ang dimension example A1 into meters? Print scale po kasi naka lagay lang ay inches or millimeters. Salamat po.
Another nice video tutorial idol..👍👍
Yung photorealistic exterior rendering nman using vray 2.0,hehehe 🙏🙏🙏🙏 please..
I made one right here pal>> th-cam.com/video/ATRkdT7mg14/w-d-xo.html
Matanong sir naka-inches po ba yung drawing units nyo po?
You're good in sharing tips and techniques to other I salute you bro keep it up God bless and more blessing to come!! Btw incomingarki student ako hehehee
What unit set-up you use when you draw? Is it in meter unit? I see when you draw a straight 8.5x11 size looks too small compare to the bed shown on workspace when in fact the bed sizes is like 2 meters lenght, how can a number 11 is too small compare to number 2, im a bit confuse
what do i do if my printable area and paper size dont match?
Very useful videoo Sir lots of love from India
Thank you pal!:)
Hi sir llyan 😁 ask ko lang po if you can teach us about Revit kahit basics po.... isa po kase ako sa di alam mag revit at gusto ko matutunan. Thanks po
More power po sa channel nyo and thanks po sa lahat nang vids ♥️
I suck at revit unfortunately haha:) Hanggang basics lang ako. Try watching The Balkan Architect, he has lots of revit tutorials:)
Thank you sir. Big help!
I do it in layout plot. Easy. 👍👍
Melvyn Joseph mas madali sa layout, fastest way
I use layout to plot out Plans and drawings that require title blocks and multiple pages, but for making scale model things i use this method haha:)
Ask question again sir. What if my drawing Units is Mtr. And my drawing is mtr also, Then i want to put my drawing in that same your way to plot it but it is set into mm. How i gonna do that? Tnx!!
Do you think this is faster than making plotting sheets and scaling the VP?
In certain occasions it is, like when you need to print just one page. but when doing plans that require repetitive title blocks and pages, using layout is faster:) It just depends on what you're printing.
@@LlyanAustria Yeah makes sense, thanks for the alternative solution!
When I saw ur post I was like:press immediately
Thank you for pressing immediately pal!!:)
Hello sir. What unit are you using before u start drawing?
Sir I want to ask something and need some advice. Ubos na po kasi ang slot sa school na napili ko ng BS Architecture and Industrial Design yung binigay sakin. Okay po ba yun? Ano pong maa advice niyo sakin?
Check other schools kung may opening, or take ka ng industrial design for 1 sem, and check mo kung may mga same subjects sya from the architecture course:)
Thankyou kuya llyan 💪🏻
Sustain the awesome job !! Lovin' it!
Thank you pal!!:)
Architect sinunod yung steps dito ng pagscale ng A3 paper pero ang lumalabas na scale nya sa plot window(ctrl+p) ay 1:112.9. Bakit ganun?
Dude... please explain about the line weights according to thicknes.. so that we can create our own template for regular and professional use for all the drawings.. coz it is not possible anyone to create every time for each file. Please..
I'll add your suggestion to my list pal!:)
I have a question... Do i have to buy a drafting table for college? Is it necessary or its just personal preference?
You can use any table with a smooth and straight edge, i don't even have a drafting table right now haha!:)
Same method tayo sir. May konting difference. Math don't lie. Haha. Layout kasi ambagal ko. Haha.
Haha yeah, mahirap nga sa layout, minsan confusing pa:)
Hello! I have a problem. Im trying to print out a 1km x 1km site on A3 paper. My model space for this site is 1:1 too. I tried your method to try to put it on an A3 paper (what was required of us in school) but the model is too big for the paper. how do i squeeze it in the a3 paper? i cannot use any other paper sizes since a3 paper is what is required to be used
Ano pong settings ng Unit niyo sa CAD? Inches po?
cool ...this helped so much ...thankyou
You're welcome!:)
Thanks alot it will help me in the future!! 😊
Glad i could help pal!:)
@@LlyanAustria no probs! 😊😃
When we print the drawing to the selected paper, the printer adds a margin. This makes the drawing shrink down so that the scale of the drawing ruins. How to correct this?
what if the drawing is already on meters and not in mm sir?
Thank you❤
hello sir Austria! just want to ask what is default units?
Hey, bro can u plz help me, how should I keep all new updates like in software, construction techniques, all News related to architecture and construction. Is there any app or any thing to do this
I just visit, archdaily.com and reddit for my architecture news:)
Hi! I have something to ask. I hope you will help. I am using layout in plotting. The bad thing is, having plotted the drawing at my desired size of paper, the preview of the layout in autocad is perfectly on center of the paper. But when I saved and opened it as PDF file, the drawing was off-centered. It was plotted nearly below the left side margin of the paper. Have you experienced this before? Thanks in advance to those who would help.
This has never happened to me before, have you tried using a different plotter?:)
@@LlyanAustria Yes. Sometimes I use the model space when I print it directly and there's no problem with the margin. But same thing when I saved it as PDF file. :( Maybe I should use an updated version of cad??
@@lyndseymojares6949 Hi! Have you solved this problem? I'm also having the same issue on this one even though my cad is updated. Thanks!
Thank you
Gosh how did I forget it's Friday!!!
Too busy with drawing projects i guess haha!:)
Salamat ❤
@ 5:32, what we called that thing you used?
You're right! Sharing is caring😆 btw thanks for sharing😅
You're welcome pal!:)
idol! maraming salamat
i like your videos, very helpful
Nice video bro need need some more similar kind videos !!
I'll release more soon!:)
Fantastic little tutorial! But I suggest reducing the level of your background audio a bit, or at least choose a more chill or slower pace music. I found it a little distracting while I was intently listening to your instructions which was a little on the fast side. Regardless, thank you for sharing your knowledge
I totally agree pal!!:) the music was a bit too loud on this one haha, anyways thank you for the constructive comment!! It helps me out a lot:)
How we can set A3 size sheet when we are use 1unit =1cm
Another spectacular video kuya!!!!🙌🙌🙌
Thank you pal!!:)
It’s a hp envy 13 laptop with i7 16gb of RAM 512 SSD good for architecture?
Yup it's good enough:) Just make sure to get one with a gtx1050 ti or higher:)
Idol medyo mabilis eh...pwede po bang may written method...salamat po
Can you make a video of plotting in the layout for floor plans! Thank you!
Hello sir? the scale doesn't match when I try the steps ;(
How do I search for information? Whenever I search on Google or TH-cam for something, I have something else that does not relate to that thing that I want 😢😢😢
Just try digging around and eventually you'll find what you need:)
Sir pano pag 1unit is 1meter sa A4 paper?
Thankyou so much you saved my day😂
Make AutoCAD Basic Tutorial please . I always forgot Autocad Command , maybe you can give Tip/Tricks.
I'll add this to my list pal!:)
Kuya I got a question po sana masagot mo po or kung sinu man ang may alam.
Im an upcoming architecture student or atleast thats what I want to believe
Theres this artistic examination and achievement exam I need to take in order to pass but Im not really confident. Could you or can anyone tell my what are those or the coverage of the exams so that I can prepare. Im really nervous and really want to pass. Plss reply.
Unfortunately i didn't go through this exam, so i can't help you:) Hopefully someone who knows sees your comment.
@@LlyanAustria Just wanted you to know I finally am a architecture student! Haha. I passed the exam and damn since it was ranking and not all students who apply will be able to be an architecture student so I was REALLY nervous! But Yay!
Ps. I can finally use your videos for my student life in architecture.
Underrated!
hi kuya llyan, you are one of my biggest inspirations with pursuing architecture. would it be possible to interview you for a school homework?
I'm kinda super busy haha:) You could just email me, my email's at my channel description:)
aaaah!!! 😳 will do kuya llyan! thank you so much!!
Thank you so much!!!
Hindi ba mas madali if mag viewport?
Pag madami ka ipplot and may title blocks mas madali mag layout:)
Love the video and thanks for the help
Glad i could help pal!:)
hi kuya llyan! can you do an autocad tutorial for beginners?
I will add this to my list pal:)
Anong po ang unang softwares na dapat matutunan pag arki student?
Autocad, sketchup, revit, photoshop:)
@@LlyanAustria thank you.. Lagi akong updated sa mga uploads nio.. Great help!👍
if the unit already in mm, is it still need to scale it in 25.4? i'm still a newbie
I think if its mm its going to be 2540? Not sure because i think u used M.
No need to scale it pal:)
Hi pls make a video on how to use tech pens and how to avoid bleeding of tech pens in tracing paper. thank you! ☺☺
I made a video a while back about tech pens pal >> th-cam.com/video/3cb5hqRHCFs/w-d-xo.html check it out here
thank you lods!
Thanks
hahaha.. hindi ko makuha laging 109.5 yung unit Architect. what should I do po??? 😁😁
Thank You Po Sir!
Thank you bro
You're welcome pal!:)