HOW TO MAKE H4 LED HEADLIGHT DIY AT HOME
ฝัง
- เผยแพร่เมื่อ 23 ก.พ. 2021
- #HOWTOMAKE #H4 #H4HEADLIGHT #DIY
diy led headlight conversion
diy led headlights motorcycle
diy led headlight strip
diy led headlight resistor
diy led headlight replacement
diy custom led headlights
diy led projector headlights
diy car led headlights
diy led headlight motorcycle
diy led bike headlight
diy led bicycle headlight
diy led car headlights
how to led headlight conversion
what is the best led headlight conversion kit
what's the best led headlight conversion kit
what is the best led headlight for motorcycle
mr diy led headlight
diy led headlights
how to make your own led headlights
how to convert your headlights to led
how to replace headlights with led
My 1981 Yamaha XJ650H cruiser has a 4H base headlight. I appreciate your skill and talent shared here, but there's no way I would risk my life on a DIY LED headlight. Granted, the headlight for my bike is hard to come but but I'll stick with manufactured items.
Share the Description plz
What capacitor and resistor you used
Cleanly arranged👍🏼
No offense I would not recommend it as DIY H4 unless it is tested on scooter/car. I made one just recently but it ended up burning the resistors
I've been researching about diy led headlights and depending on the way they are connected parrallel/series i get recommended to use a resistor with higher value then what a circuit calculator saids.
Bang di tata dulu di meja atau di kramik baru solasi
Dioda n resistor ukuran brp ngaB?
sir is m daivod or rsistns kin c lgai ha
Resister kitne ka lagaya he ohm ka he ya k ka
Creative yes but effective on a headlight housing you did not show.
Bhaiya resistance kaun sa lagana chahie headlight mein
Video quality is very poor all activity is not visible and no voice which kind of resistance doiout smd,s how many v sorry I don't like it.
What are the parameters of the capacitors you use?
I think those were diodes not capacitors.
Are Sar ismein LED bulb Mein resistance kaun si Lagai
Không có tản nhiệt nó cháy hết
This is terrible..😃, but you're creative👍💪
diparalel y cepet koit bang
k hướng dẫn cụ thể
Kalo led nya pakek yg 10watt sama ukuran R nya om?...
Most of the time video was out of camera 😢😢. I don't know what you want to show?
AOA
Too much effort and result will be very little. The LEDs will become hot in a few minutes and burn out. You need thick heat sink. I am sure your next attempt will be closer to perfection.
I carefully saw the Leds and they didn't seem to have the silver coated base that are found on 1 watt and up Leds so they would be ok if those resistors are 470 ohms they wouldn't bright up that much and heat up i've tried that on some projects.
Oh wait they did have the base under each of the leds but still those resistors if they are 470 0hms each they don't let the leds heat up because they don't get that much bright.
@@sergioramses2615 Any experience with a similar project that you can share?
@@sankyppp I've done something similar as a project but as i said in my last comment the 470 ohm resistors don't let the leds get to bright but i change thise 470 ohm resistors to 330 ohms and the leds did bright up a little more but still needed a good heatsink like New led headlight bulbs
Ra jelas ukurane
Ukuran R
Idea achcha h per jab led heat hogi tab kya. 4-5 mint. Me he kharab ho jaygi.
oke bos, thanks.
th-cam.com/video/FSwZFkp8ieo/w-d-xo.html
Fake bhai kam nai krta LED jal jatihain
ga jls