MILLSTONE DRESSING / SHARPENING / GRINDING GRITS v101
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- I will dress two stone grain mills from start to finish. Hope you enjoy!
Check out Marsh Hen Mill at
marshhenmill.com
Here at Metcalf Mills our goal is the preservation and education of the grain milling process. and also to help provide a service that makes good, healthy, fresh milled products more available to individuals and communities.
You can find us on Instagram at Metcalf Mills.
If you would like to support what we are doing you can do that at www.paypal.me/... or on Venmo @Justro2020 .
Please subscribe and thank you for watching!
PO Box 2098, Mars Hill North Carolina 28754
![[#SHORTS CLIP] ใช้ของของตัวเองไปเลยสิคะ l ซานิเบาได้เบา l One Playground](http://i.ytimg.com/vi/Ea_mTywx2p4/mqdefault.jpg)
💖
Thanks Donna!
B and D vitamins justin..lots of water. Low carbs n sugar 😃 elderberry always helps get energy back.yup been there slept thru 2 days before I woke n realized I hadn't even got up to feed the animals..
Thank you, I am working on it. That elderberry is goood stuff! I understand LR, I completely understand.
👍 👍 👍 🙌 🙌 🙌
Thanks LR!
I root for you as I watch. Anyone else feel the pride we have for our buddy, Justro? I feel like saying, ‘Just wait until you see how well Justro dresses those stones, none better.’
Aw thanks RR! I appreciate you!
Fascinating, thank you Justin.
Thanks Angela!
Justin you’d ask about grains for celiacs, well we also must b careful of the mills. You used red food coloring not celiac friendly. Red dyes are mostly made from red hard wheat. One of the many hidden contamination sources. Elderberry syrup vitamins extra vitamin D. Get a mineral capsule take care. That looks like precise work and takes a lot of focus so add omega 10
Auntym thank you for that info! I have to purge the stones after dressing, they are spinning around 650 Rpm’s with a good bit of corn going through there is NO trace of the food coloring left. I will look for a different color that is better for that reason, thank you! Thank you so much for the recommendations!!!
Sure did enjoy every bit of it! I am proud of you
Glad to hear that Wayne, Thanks brother!
Now that was a pleasure to watch!
Thanks folks! Glad you enjoyed.
I promise I will never complain about the high cost of stone ground flour again, there’s a good reason why a Rolls Royce cost more than Ford Pinto.
I heard that Justin! It is a different bread..
You know, Justro, you is becoming "The Man, The Myth, The Legend". I caught that "o ver" moment and those other uniquely Justro moments.
Your skills and patience for fine, quality work is to be commended and well compensated.
Also good to see your health is improving.
God bless and see you on vid 102, brother.
Aw thanks Kenneth! I appreciate you brother.
God bless you and I will see you there my friend.
That was very interesting. Looks like a lot of work but they got the right man for the job. I've never seen a mill operate. You made me a little nervous moving around those spinning belts with loose clothing. Be safe my friend.
Thanks brother, always! I know too many stories of shaft deaths, it may have not looked like it but I am always watching when around shafts & machinery. They will KILL you. Thanks Steve!
Justro, I am so thrilled that you were able to push through a days work after being so sick. I know your girls are feeling better seeing how you are feeling better. What a relief for us all. I wish you continued strength from The Lord as you are mending. Your friend on the coast!! Wendy 😋
Me too Wendy! Thank you so much! The NC coast?
@@metcalfmills5679 yes sir! Wilmington
But I’m in the process of moving back to Columbus county. Yay! Fresh dirts
Eat some fish for me before you leave there!
Hope all goes well with your move!
@@metcalfmills5679 I will try Justro! I still will be driving to work for a bit. 🙃
❤ nothing better than fresh grits!
That’s for sure!
Wow , this will come in REAL handy next time I need to sharpen MY stone Y'all 🤓
Hope it helps Jeff. Thanks for watching
Mike Morales has been talking about some really active sun spots that can sap your energy going on since about February 4th. I have definitely been a bit low energy for the last little bit, too. I’ve been reading about relationship between volcanic activity and earth quakes to sun activity. Interesting how all of these things are connected. Anyway your work is very precise and skilled. Good to see there are still craftsmen out there. I think we are going to need to revive that in many areas and it will be a very good thing for society if we can.
Interesting Tracy! Thanks for sharing. Thank you for the compliments and yes it sure would!
Hi I just watched a TH-cam show on Deep South Homestead and he said you were more meticulous then he (Danny) is. Well that’s a heckuva compliment if you ask me!! I think the work you are doing is very important and I know I’m going to enjoy your videos too! It’s probably kinda funny considering I’m a small town gal living in a big city high in the sky on the 34th & 35th floor in Canada but I am so far disconnected from living the lifestyle that I’m forced to live in because of the closeness of quality healthcare and my disabilities. I absolutely love watching how things were done the old way and how we may need to do them in a similar way again. Anyway just wanted to say Hi!
Glad to have you here Leanne. Thank you for sharing I understand
GREAT JOB it's amazing to see the work that is a fact machinery work to hand dressed stone . Your at the very top of the trade. Your famous . Will look into the mill. But next time your down call for orders for fresh fish
Hahaha thanks again great video get better.
Thank you!
A real interesting process. The proofs in the grits as you said. Some things are just meant to be done by hand. I see examples in blacksmithing all the time. You can't buy quality; you have to build it. Thanks, Justro for another educational, historical and entertaining documentation of an old-time practice.
That is for sure. Thank you Stan.
You should promote a go fund me etc to rebuild that old mill building you showed a few months in every video.
If you make a dollar per video it's worth the extra few seconds of mentioning before you sign off
Thanks but that one is privately owned and ready for restoration. I am looking forward to it!
@@metcalfmills5679 oh cool.
I thought it was yours
Sorry 3 comments but this fascinates me..so? The commercial flour companies do they have metal machines that act like the mill stone? I hope they appreciate how meticulous you were...
No, please, comment all that you would like! Yes a lot of the bigger companies do have steel burr mills. They do not render the quality milling that natural stone does. Great question LR!
You are very meticulous! It's wonderful to see someone who takes such pride in doing things properly.
Thanks Heaseba, I appreciate you
What an Amazing Journey we just encountered with You & this Stone Reconstruction, on this Mill… You just never know the Tedious Work that goes into someone’s Job… Now we know how this All Works !!! Thanks for Sharing & Explaining all of this to Us !!! Totally Amazed… What Patients you have !!! Until he Next One 💞
So glad you enjoyed, thank you Brenda! So glad to share!
Another great video , glad to see you feeling better , and it does take a while to get your energy back , We had the Delta in August and caught the Omicron in January, so I know how it is I'm still weak but by the Grace of God we will all get back where we need to be it takes time. God Bless you Justin.
Sounds like you understand. Thank you my friend. Yes we will and God bless you too Ricky!
Thanks for taking us with you for this part of your work Mr Metcalf, glad you’re feeling better! Stay safe and keep Well!!!
Thank you Thomas! I appreciate that
Job well done Justro! It was interesting to hear the change in sound each time you surfaced the stones. It changed from a random strike to a more constant grind when you were finished. Very interesting, thanks so much. See ya overyoner!
Thanks Rick! Glad you enjoyed. See ya there!
Why do some people call you Justro? I was so blessed to watch you at work. It all looks so intricate, but you are so gifted to do this! Very cool! Thank you for sharing this!
I just did a video on that my fun fact Friday this past week. Thank you glad you enjoyed
Beautiful facility they have there! Even places to put the fork lift to lift the heavy bins! That is some fore thought. Everything looks super clean and efficient.
It sure is Tracy. I always enjoy working there.
Awesome job! Proved ones again. Knowledge, focus and practice is the way to go.
Congrats for the channel 👏👏👏 and thx for sharing. 🙏
Thank you. Glad you enjoyed
I like watching you work on these. I find it very cool that the stones of these commercial mills still look and operate pretty much the same as that smaller really old one you dressed on your porch a few months back and even like the ones in that really old mill you hope to restore. These are just surrounded by metal instead of wood. Are they still made from that French stone or is that different on different mills?
I’m still smiling because they told you how much longer your hand dressed stones lasted compared to the pneumatically dressed ones. I’m not surprised, there’s something to be said for true craftsmanship. I’m glad they let you know they appreciate your skill!!
I think what I’m most impressed with though is that you don’t have red stains on all your clothes from the food coloring!! 😂
Thanks for letting us hang out with you while you worked. I know it felt good for you to get back at it and I hope your energy is all the way back for you soon.
Hope you and girls are feeling better. Enjoyed watching! :)
Thanks Belinda! We are a lot better! Glad you enjoyed.
A whole lot of work there Justin. A whole lot of work. I am happy to see the equipment they use. Sometime if you can it would be nice if you explain how the other things work the separator equipment I mean. Are these machines grading the meal or just collecting it. Anyway thank you for sharing you experience. Take care of you self and call sometime.
I will do that Glenn, thank you! I am glad that you enjoyed it! The seperator is grading the meal, and 2 grades of grits. I will do that, we will talk soon my friend
Love your videos..... so informative and just down home...which I love as My family is from Roan Mtn TN and Banner Elk NC. Thank you for Making Milling Great Again!
Thank you! Glad you enjoy. Ha ha I’m trying
Very interesting, one day i would like to own a stone flour/grist mill and always wondered how they are dressed. Here in Canada very few smaller size mills for small scale farm exist. So i would have to buy probably new and learn myself how to dress stone so knowledge share by you is precious to me. Thanks for taking the time to share with us.
Thank you for watching. I have a friend Alberta and he wants a Mill also. I plan to ship him one later on. Let me know, I can help you with all that and I will help any way I can. I appreciate that and I am glad to share and hopefully help.
Fantastic....love you....from Pakistan....I have learned the whole mechanism of stone dressing....we have flat stone mill of very big stones
Thank you for sharing!
This is awesome!! I’d love to build a mill the old way! You inspire me!!
That made my day! It’s what I do almost everyday! Thank you !
Thanks for sharing the video. Very informative.
Glad you enjoyed!
Hope you had a nice birthday :)
Thanks Tracy! My customers made it nice 😁
One of the few people left in the country still beatin on rocks . They e even determined it to hard work for prisoners.
I heard that. I try to keep it to a peck..
Do you own your own mill or do you dress the mill stone for a living?
Both Fred. More to come on that.
Well done sir!
Thanks Larry
Great video. Nice to see how it’s all done. Talent for sure. Not many could do that. I know it’s been a bit since this video posted but hoping you got energy back. It’s kicking my butt right now. No fun
Glad you enjoyed it. I am still not 100%. I hope that you get well soon. I didn’t get better until I got some equine treatment
Love that video on dressing the stones grate job good info on how it is done bye hand to me is better love it from steve c from state Oregon
Thanks Steve! Glad you enjoyed it.
That was fantastic and a great education. Thx u soo much Justin.
Glad you enjoyed
Hey Justin, I have always liked all the videos about dressing the mill stones on the different mills you have worked on. That is completely a dying skill esp as it all become automated even though it is not as effective over time. take care bye for now
Glad you enjoy brother! You too
Wonderful video! It's good to see that you are feeling better. What are they using to load the hopper with corn . It looks like a vacuum with an air lock and cyclone.
Great video, a lot of hard meticulous work. What type of stone are these?
Thanks Ron! Granite stones.
good talking point..ask a knowall how do they dress a millstone./ good stuff.
Thank you Ken
Where did you learn to be a Millwright? I am amazed at your work.
For the most part self taught. I couldn’t find anybody or anywhere to teach it. Thank you
@@metcalfmills5679 I really enjoy your channel, the stories remind me of the old days where i grew up.
Well Justin, You know your technique is best, but before you dismiss the air tools used remember it might be the operator of the tools instead of the tools. Maybe it would be benificial to try the air tools to see if it could save you time and effort, and be easier on your body. Your experience and tanacity to do the job right is probably the differance between 200,00Lbs, and 1,000,000 lbs. 😊 Just saying.
I know what you mean Dave but there is minimal control, and you are working with tolerances the thickness of a cigarette paper.
I use the pneumatic hammers when roughing out new stones, but not for any finishing. Thanks Dave!
@@metcalfmills5679 Thank you Justro! I really appreciate your work. Thanks for the reply.
Thank you Dave
durned good video
Glad you enjoyed, hope it helps
Very interesting! I am curious...is this something you learned growing up in a family business? Do you have an episode that explaines where your knowledge came from?
Thanks for the question Neva. I talk about it in a few videos. I was inspired by hearing my dads stories. When I was 15 I restored my grandpas grinding mill, and I have loved it ever since. I have learned most of it as I went.
@@metcalfmills5679 So self taught! Very good!
So how much more difficult is a horizontal mill to dress over a vertical mill with that much dis/ and reassembly.
Way easier to dress a horizontal.
@@metcalfmills5679 thanks going down Monday or Tuesday to look at one similar to the one worked on in this vidio. Been out behind a barn for long time the shaft is neer rotted In half on the end that slides out. They have 500$ on it. How difficult is shaft replacement if the casing , stones and parts on the pully end are good.
I use sand. I would feed the machine with thin sand and miller it till the 10 inches stone are smoking and dress it againg. Do you think I doing wrong? I mean I not sure if this way a get a true face. These are corn millers by the way use for corn masa.
Hey Arturo, if it works it works. That is a way to add some life to millstones for grain. I am very interested in a masa mill. Where are you located?
@@metcalfmills5679 I'll try your style and see if I can get better results. I'm going to use a wooded ruler and paint to see the high spots. I'm at México, most miller are corn masa miller around here. We use thin sand and an angle grinder to dress.
@@arturoluna3627 thank you for sharing this with us. I am going to make masa one day. I have seen it done. Thank you and please share anytime ❤️
do you know of a good company that make's a Quality Granite hand cranked mill i am looking for a Granite hand mill like the MH8 but don:t trust any of these company"s i have bought a mill from online but they never sent my mill i spent 1,200$ they kept telling me it was going to be 8 weeks now my bank wont help me because its been to long. i really want one but know nothing about them i have a 500$ electric mill from amazon it does not make fine flour . any information would be helpful.
So sorry to hear that. No I don’t have experience with any small mills