Toyota Yaris Hybrid 12v Battery Replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 มิ.ย. 2024
  • Step by step guide on how to replace the 12v battery from a Toyota Yaris Hybrid. In this video, you will see how to test the small battery , cold-cranking amps , how it does charge, and the battery type you will need for this hybrid car .
    Disclaimer :
    This youtube channel :"doit_vehicles " can not guarantee that this information suits your car . "doit_vehicles " assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk
  • ยานยนต์และพาหนะ

ความคิดเห็น • 40

  • @doit_vehicles
    @doit_vehicles  2 ปีที่แล้ว

    Playlist with more Videos on this Car :
    th-cam.com/video/-eSfxaLGTN4/w-d-xo.html

  • @andrewhudson5826
    @andrewhudson5826 2 ปีที่แล้ว +35

    Always disconnect the negative first and then the positive when removing the battery. Then when connecting the battery you connect the positive first and then the negative.

    • @TCSC47
      @TCSC47 4 หลายเดือนก่อน

      Well said! I was just about to say this as well. If you put your spanner on the positive terminal and accidently touch the metal work, whist the negative is still connected to the metal work, a dangerous current flows which can be enough to melt parts of the spanner and cause an electric spark that can be equivalent to a small explosion. By disconnecting the negative first you avoid this hazard.

  • @TCSC47
    @TCSC47 4 หลายเดือนก่อน +1

    Good video with excellent demonstration of getting at the hidden battery, apart from note below on disconnecting negative first.

  • @richardking6066
    @richardking6066 2 ปีที่แล้ว +8

    My 2014 Yaris Hybrid also has a gas vent-tube attached to the 12v battery... Thank you for another excellent video BTW!

  • @codingwithguruge
    @codingwithguruge 2 หลายเดือนก่อน

    Thank you so much for the nice video and explaining everything clearly

  • @hippopotamus86
    @hippopotamus86 22 วันที่ผ่านมา

    1:38 You can easily remove them by pressing the middle part of the clip inwards with your finger, it will pop out the outer part and then you can remove it. Just something I discovered today.

  • @FredJanon
    @FredJanon 2 หลายเดือนก่อน +1

    Thanks so much. You really helped me. I could not figure out how to remove the cover under the seat to access the battery to jump start my Yaris hybrid. Thanks again.

    • @davidboland3452
      @davidboland3452 2 หลายเดือนก่อน

      If you are jump starting there is a terminal under the hood, its much easier.

    • @FredJanon
      @FredJanon 2 หลายเดือนก่อน

      @@davidboland3452 Thanks but no, there is no such thing on these models.

    • @davidboland3452
      @davidboland3452 2 หลายเดือนก่อน

      @@FredJanon what year yaris do you have?

    • @FredJanon
      @FredJanon 2 หลายเดือนก่อน +1

      @@davidboland3452 2012

  • @ridvanbasikara7042
    @ridvanbasikara7042 2 วันที่ผ่านมา

    Thank you for the Video

  • @jshunskey8909
    @jshunskey8909 ปีที่แล้ว

    Thanks for sharing your video 👍do i need a scan tool to replace a 12V battery.

  • @bessie2275
    @bessie2275 5 หลายเดือนก่อน

    Well done, great video, guess what I drive....

  • @rawanabard4783
    @rawanabard4783 10 หลายเดือนก่อน

    Thanks for your Video, should be registered the new battery? because now i changed the battery and car popped up shift To P ! 😐

  • @TWARDOWSKY.
    @TWARDOWSKY. 6 หลายเดือนก่อน +3

    Question to Toyoty engineers, was there really no place under the motor hub for this small battery?! lol

  • @amjadislam7352
    @amjadislam7352 2 ปีที่แล้ว

    Can i touch both terminals for a while to remove airbag sign removel as i tried passanger side under seat yellow plug and with seat belt rezister as well but couldn sort out the problem?

  • @robertfi9745
    @robertfi9745 2 ปีที่แล้ว +1

    How to register new battery? I've had empty battery, so I disconnect minus and charged. Then I connect minus, car opens, but there is no combistion engine work...a lot of leds on dashboard shine... Do You know how to fix this?

  • @robertocabezuelobetanzo5319
    @robertocabezuelobetanzo5319 2 ปีที่แล้ว +4

    Hi, i replaced the battery following your tutorial, but the car do not start. it shows the engine light on in the dashboard and dont start. i try with the original battery and it doesnt start either. how i can solve that???. Thanks for the tutorial btw

    • @diamine75
      @diamine75 6 หลายเดือนก่อน

      I have the same problem. How can it be fixed?

  • @harryh5942
    @harryh5942 ปีที่แล้ว +1

    How to Clean hybrid battery fan ? Please thanks

  • @burgzvi
    @burgzvi ปีที่แล้ว +2

    I will not be using my Yaris hybrid for a few weeks. Is there a way of disconnecting the 12V battery from under the hood rather than what you show in the video?

    • @bobbarley6578
      @bobbarley6578 4 หลายเดือนก่อน

      Just switch the car on and leave it in park mode for an hour or two per day. The 12v battery will be charged and won't go down.

  • @federicotorresbordils7624
    @federicotorresbordils7624 3 ปีที่แล้ว +4

    Why don't you remove Negarive born first and afterwards the positive ?

  • @Mihai1174
    @Mihai1174 2 ปีที่แล้ว +2

    Always on battery car first disconect negative becaus so you eliminate the probability that + touch the chasis car

    • @doit_vehicles
      @doit_vehicles  2 ปีที่แล้ว

      true ... , but once the + is off the battery it doesn't really matter if it touches the chassis, right ? 🤔

    • @Mihai1174
      @Mihai1174 2 ปีที่แล้ว +1

      @@doit_vehiclesYes, it is true, but the probability of risk is when you detach(the moment of work ) the + from battery, and there is the possibility (risk) that you can touch "without wanting" a body part.
      If minus are disconected fron body car this risk are 0
      I do it once with my mirror worktool ,ijust touch + and intercooler tube and my tools is almost meting

  • @BlocksPlayTV
    @BlocksPlayTV 2 ปีที่แล้ว

    Can you charge the large battery through the 12V? I would like to hook up my portable 12 V panel to the car

    • @doit_vehicles
      @doit_vehicles  2 ปีที่แล้ว

      the large battery needs around 300 v

    • @joehatton9790
      @joehatton9790 2 ปีที่แล้ว +1

      The large hybrid gets charged when using the vehicle or when you leave the car in READY mode. You don’t need to do anything to the big hybrid battery. Though you do need to look after the smaller 12v battery, especially in cold weather if you not using the car often. In which case put the car in READY mode for 45-60 minutes twice per week.

  • @u.e.u.e.
    @u.e.u.e. 5 หลายเดือนก่อน

    1. Isn't there a little hose for guiding the hydrogen out of the cabin?
    2. If you had disconnected "-" first you wouldn't need to worry about touching the metal frame.
    3. Toyota considered you doing it in the wrong order and placed a white plastic cover over the frame. 🤭
    4. I disagree on your testing method: when there is written "CCA 272A" (left) you test for CCA 270 or 275. If there is written "DIN" or "EN" you test for DIN or EN.
    5. How much longer than the original 197 mm could a battery be? Does a battery that is 40 or 41 mm longer fit in there? 🤔

  • @alfredquaisie1478
    @alfredquaisie1478 ปีที่แล้ว +1

    Thanks very much for this video, very helpful description of the battery location.
    Please I need help to recharge my 12v located at the back. Any contact number for me to call as my car is stuck at home can't move.
    Please urgent reply

  • @mal2813
    @mal2813 ปีที่แล้ว

    If my Toyoyta hybrid car does not start and its showing the battery sign (battery is more than 10 years old) , Is it enough to replace this 12v battery? Or do I need to the replace the hybrid battery itself also?

    • @dcornwell7130
      @dcornwell7130 ปีที่แล้ว +1

      No just the 12v battery. Just done mine. Cost £142.95 for the battery if your car is not driveable. If it is then only £149 for Toyota to do it. Just follow the video. The only thing I found difficult was pulling up the seat (went back easily) and of course the clips broke when removing the trim which was also tricky to get back. But only took about 30 mins and fired straight up.

    • @conradsmith7752
      @conradsmith7752 9 หลายเดือนก่อน

      ?@dcornwell7130 Did you need to register the battery after swapping it?

  • @hunchobrown4261
    @hunchobrown4261 ปีที่แล้ว

    If the 12v is damaged can it cause the car not to start???

    • @dcornwell7130
      @dcornwell7130 ปีที่แล้ว +1

      Yes. See my reply to above question.

  • @mahdi2m2
    @mahdi2m2 ปีที่แล้ว

    Is the battery in the same place for camry 2019 ?

    • @doit_vehicles
      @doit_vehicles  ปีที่แล้ว

      it's possible, I am not sure .