@northmanlogging2769 facts, even in Bulgaria they wanted to charge me 650$ for a Garett turbo. Both for my Nissan X-trail diesel(Rouge in usa) and e350cdi
@@billyarden9708 no balance really needed as the wheels are the same. However the clocking of the turbine wheel and compressor wheels relative to each other is important if you want to retain the original balance. Although if you don't follow that the turbo is unlikely to fly apart..it may...may...fail a little earlier though.
That's what I was thinking when he said he used his wife's dishwasher, I'm surprised he could get away with just joking about that.he has more balls than me that's for sure.😢
Like the bit where he says "A lot of these are metric so make sure you use the right tools" Then he goes and uses mole grips and a knife to undo nuts and bolts. :/
My screwdriver doesn't have a handle, so I had trouble tapping it to remove the compressor. I had a look around and the only thing I could find was a frozen hotdog. After a few taps it came right off, plus it smells like hotdogs now! Thanks Ichiban!
My ex wife had turbo problems. She went to our local garage and the mechanic said it looked like she had blown a seal. No she said, i have just had an ice cream.
this is the best tutorial i have found on rebuilding a turbo yet! simple and straight forward, now i can rebuild my turbocharger with my vise grips and scissors :D
I had to make mine... I have a how-to video here on youtube. The snap off truck has good ice cream and I look forward to hearing the music during the summer
Good work. A very informative video indeed. I'm going to take the turbo out of my car this evening and service is ready for the morning commute. I've got an important meeting first thing and I want to get to work as quick as possible so that I'm not late: it's kind of an interview for a senior manager position (it's a real big deal). Spending a few hours rebuilding my turbot should help me relax and make sure I don't flounder at the interview. Este video es malo burro!
It's a shame the vast majority of people are right handed. It makes the market for left handed vice grips smaller. I'm having so much trouble finding one.
+Alban Gaval I'm left handed, been so all my life... needless to say, I've amassed quite the collection of left handed hand tools. I've got some spares I'd be willing to trade for a metric monkey wrench...
Mike- Would have been nice to get a heads up on where I should spend my hard earned gold coins on that new fangled Torque wrench. I'm sure Joes Garage would have one layin' around.
Makes me want to rip the turbo off my car and overhaul it immediately. And it ain't even broke. Thanks. Your choice of tools seems heavily inspired by McGyver though.
have you seen those multiturbo compound setups with a large and small turbo plumbed in series? one to spool quick and the second monster for top end? I might add that to my Honda minitrail
My mechanic installed a new turbo Cartridge but is loosing exhaust at the housing connection. He said that he tightened the bolts right . Do you have any suggestions why is not sealing right?
mechanic should back up his work and make it right for you. maybe he left out a seal or gasket, it was not loosing exhaust before he put spanners to it, right?
@@IchibanMoto my Cartridge needed replaced. The problem is that there is not a gasket on the exhaust side of the turbo. So im not sure how it supposed to do a thight seal.
This video made it seem so much more easy. You earned my subscription. I can say I was scared to do this. Now to rebuild my Subaru turbo that's been screaming at me for weeks FIX ME! while I periodically pickup and put down the rebuild kit. Yelling NO!!!! I'm not qualified!!
I hope, dear friend, I hope! As well as for my two lefthanded leatherman's, with which I repair most of my cars - as I have one metric and one of those illegal ones, like you bad ass seem to use)
Bro I love your videos. U have made me such a better mechanic. But my wife hates you and blames you for me using her kitchen to it's full potential! She just does not under stand.
"Make sure to use the right tool" xD I love your Videos, ichiban. Since 42 years, I work on motorcycles, it seems I did everything wrong, using professional tools
Argggghhhhh! You forgot to mention installing the circular heat shield plate against the exhaust side turbine BEFORE putting the shaft into the housing. Fortunately I noticed I had one part left over...after it was completely assembled. Otherwise, thanks for an excellent video, and for the humor too.
+John Rush that's a custom hot rod blue dot . Bobdog sent me a set, but my bike only has one tail light, so I have that extra one. I posted a video of me installing that mod here on youtube
after I get the funny spot,now I can fully understand your video. funny and useful. Love your video,thanks. keep making more! I give you 50 at 5 Ichiban Moto sticker!
Excellent video, first of yours I've watched. I'm hooked, found you through Mustie1, I get the tools thing and find it incredibly funny. It's a nice counterpoise to the rest of the video, which is incredibly informative, and very well done. Thanks, I've some catching up to do...
Weird. That looks just like the turbo on my GF's old Vespa. I didn't know you could use a two stroke turbo on a CB750. I learn something new every day around here!
Great to see how easy it can done. But can you give me some Url's where I can get the gasket and parts to rebuild it as new p;ease. I found one gasket and part set but was very expensive around 200 Euro.
Hi Ichiban! I have 2 questions: -what other kind of grease should I use to reassemble? What's "assembly grease" similar to? -can you tell me the torque spec of the compressor nut? Thanks, first time here on your channel!
I'm so glad my bike doesn't have a turbo. Partially due to the incredible complexity (wizard like turbo knowledge there Ichiban) and mostly because there's no room in my tooling budget for left handed vise grips. I already have a metric set and an imperial set. Can't quite run to another! Great watch, as ever.
I might be able to help you find one, but i just installed a new Vtec chip in my rx7 the other day, it was difficult, i wish i had your help. keep on making vids man, you have my whole office in hysterics every day. we give you 6/5.5 ichiban stickers. love your work
After following this, I gave it a spin up using my harbor freight pancake compressor. It smelled minty fresh. Only one question: how many torks do I need to compress the thrush washer?
I like your precision tool , and multiple purposes domestic dishwasher, including the clock ratchet, job well done ❤, kindly can we hear it running on the car 😂🎉 , greetings from Sweden 🇸🇪
I shared your channel with AvE and his clients. He holds the patent on the Swedish Nut Lathe. All you do is round it off to the proper torque and your done, left or right hand thread doesn't matter.
Wow, this video was super usefull... The turbo on my front wheel has come loose, and I think that I would forget to make index marks if I hadnt watch the video... Thanks Ichiban!
Bro pulled out every tool except the correct one. Love it 😂
BIG ERROR: turbines are balanced so you must mark the relative position of both turbines before open the shaft.
I was about to ask about this.
So say he were to replace the compressor wheel.... how would he balance that against the existing Turbine?
says who? oh right, the guys that charge $700 to rebuild a $650 turbo
@northmanlogging2769 facts, even in Bulgaria they wanted to charge me 650$ for a Garett turbo. Both for my Nissan X-trail diesel(Rouge in usa) and e350cdi
One turbine is fixed to the shaft so you can only mark 1 turbine ,shaft and nut
“The right tools” 😂😂
Do as I say..not as I do :)
Does he have any proper tools?
Painful to watch use of vice grips and swiss army knife
Lmao he still made it work!
Left handed vice grips .....!!
I learned so much on turbos from watching. Out to get a left handed vise grip. Thanks Ichiban!
+PistnRods you should Turbocharge your SV ! that would be bad ass !
Is turbo fin need to be balanced if u open it?
@@billyarden9708 no balance really needed as the wheels are the same. However the clocking of the turbine wheel and compressor wheels relative to each other is important if you want to retain the original balance. Although if you don't follow that the turbo is unlikely to fly apart..it may...may...fail a little earlier though.
The store was out of blue assembly paste now i have to use the white paste with red and blue stripe in it.
+Harry Nak overkill
It will probably work just as well...
I used my wife's dish washer like you said. Now I'm wearing it and can no longer get into my car, Turbo problem fixed! Great vid many thanks.
I would be strangled in my sleep if I put that in my wifes dishwasher. Guess we know who the real men are around here...lol
😂😂😂😂, you're very funny, I thought about the same thing when I heard him say'I will use my wife's dish washer' I thought are you sure?'...
That's what I was thinking when he said he used his wife's dishwasher, I'm surprised he could get away with just joking about that.he has more balls than me that's for sure.😢
Holly shit that dishwasher needs a gold medal
+Arlind Sadikaj It has had a few bad ass mods thrown at it
+Ichiban Moto Could you make a video of how to make a bad ass dish washer?
+Ichiban Moto 5 out 5 ichiban moto stickers for that dishwasher!
Arlind Sadikaj is this for real,did you see his tension wrench WTF
Had to show the boss this video, He didnt think ive been doing turbos correctly for a long time, now I was able to prove him wrong! Thanks!
Brilliant. I knew the dishwasher would come in handy for home turbo repairs.
If someone used a utility knife to tighten the security screws on my turbo I think I'd go insane. Somebody sponsor this guy and buy him some tools.
I've seen worse...
Like the bit where he says "A lot of these are metric so make sure you use the right tools" Then he goes and uses mole grips and a knife to undo nuts and bolts. :/
even metric have a 0 tolereance
those are torx screws, you can buy them at any tool shop
in germany they do
My screwdriver doesn't have a handle, so I had trouble tapping it to remove the compressor. I had a look around and the only thing I could find was a frozen hotdog. After a few taps it came right off, plus it smells like hotdogs now! Thanks Ichiban!
+risc19 oh, bad ass! I love hot dogs ! especially with a few sporks of mustard !
Was it the big hot dog from Costco.. you can bang the turbo housing and the girl next to you with that hot dog...lol
The driver part doesn’t have to be in the handle to use the handle part.
Sheesh 🙄
We miss you Ichiban
My ex wife had turbo problems. She went to our local garage and the mechanic said it looked like she had blown a seal. No she said, i have just had an ice cream.
+Andrew Wilson hahaha !
Andrew- I don't get it. Just kiddin'. You know us jocular Canadians.
🤣🤣
His ultrasonic cleaner was really his wife's fun toy...
😂😂😂😂
Thanks for that Torque Wrench idea.............you just saved me a small fortune. !
That torque wrench; I freaking lost it😂😂😂
you can make one too. i have a video how to make torque wrenches
Your torqu wrench is amazing hypertech !!! WOW !!!
i have a video on how to make one. pretty simple
where ????
can you please share your super sonic washer , how you built it ,, thanks
i will add that to the list
i loved the great tools you used nothing better than using the right tools for the job lol great vid
Best short video ever . Thanks mate. Going to rebuild my Mercedes Benz 300 coupe turbo diesel now
this is the best tutorial i have found on rebuilding a turbo yet! simple and straight forward, now i can rebuild my turbocharger with my vise grips and scissors :D
This demistified turbos for me - it has given me the confidence to pull our broken laptop apart in order to conduct a full repair.
Awesome video. Best one for beginners on youtube. You make this look not scary. That ultrasonic cleaner is awesome.
Great info! And magnificently sarcastic I love it
At 6:03 I have the same torque wench. Got it from the Snap-Off truck yesterday.
I had to make mine... I have a how-to video here on youtube. The snap off truck has good ice cream and I look forward to hearing the music during the summer
Good work. A very informative video indeed. I'm going to take the turbo out of my car this evening and service is ready for the morning commute. I've got an important meeting first thing and I want to get to work as quick as possible so that I'm not late: it's kind of an interview for a senior manager position (it's a real big deal). Spending a few hours rebuilding my turbot should help me relax and make sure I don't flounder at the interview.
Este video es malo burro!
zen master fluchter !
you should polish the inside of your tires too! you know so the air flow is better inside your tire.
Dana Kelley
Check.
I give your dishwasher 5/5 stickers!
Hahahaha.. that wrench action at 0:43
It's a shame the vast majority of people are right handed. It makes the market for left handed vice grips smaller. I'm having so much trouble finding one.
+Alban Gaval I'm left handed, been so all my life... needless to say, I've amassed quite the collection of left handed hand tools. I've got some spares I'd be willing to trade for a metric monkey wrench...
+jrmym2 if I strike out at tool jumbles, I just post wanted ads on crabslist
Alban Gaval i have 2... Ill sell you one for the small sum of 750.00.....american quarters only
jrmym2 the master mechanics tool I covert the most is his left handed drill & bits. I have searched all my life for that combination.
A good balance of humour and useful info. Five thumbs up. 👍👍👍👍👍👍
LMAO!! Clearest and funnest turbo rebuilt tutorial on TH-cam!! Thanks!
haha! feel free to share it. :D thanks for watching !
love that lefthanded vice-grip and top quality torque wrench ha ha. keep up the goood work
Mike- Would have been nice to get a heads up on where I should spend my hard earned gold coins on that new fangled Torque wrench. I'm sure Joes Garage would have one layin' around.
i have a video on how to make it
Makes me want to rip the turbo off my car and overhaul it immediately. And it ain't even broke. Thanks.
Your choice of tools seems heavily inspired by McGyver though.
maybe rebuild it every other day
Lol ! I'll just add another turbo every month without replacing the previous one. In three days I'll go 250 mph.
have you seen those multiturbo compound setups with a large and small turbo plumbed in series? one to spool quick and the second monster for top end? I might add that to my Honda minitrail
Sounds like a plan to me. Go for it.
Gabor- Or maybe McGruber.
Very nice torque wrench ..... that is a must have tool.
My mechanic installed a new turbo Cartridge but is loosing exhaust at the housing connection. He said that he tightened the bolts right . Do you have any suggestions why is not sealing right?
mechanic should back up his work and make it right for you. maybe he left out a seal or gasket, it was not loosing exhaust before he put spanners to it, right?
@@IchibanMoto my Cartridge needed replaced. The problem is that there is not a gasket on the exhaust side of the turbo.
So im not sure how it supposed to do a thight seal.
( is the turbo from a Sprinter 2009)
I actually only watch your videos to hear you say 'badass'. It cracks me up every time!
+David Lowe should I sell mp3's and ringtones on iTunes ? ;)
Thank you for a very good and informative presentation.
Awesome video, I also like your tools great set up. You got skills
your Civic must be badass!
+Bike Boobs Just need to clean it up a bit. I had to cut a hole in the hood .... so it can clear my turbo ;)
Enjoyed your video, very helpful. I found it funny too using vice grips on nuts, and the dishwasher for parts!
Thank you. One of the best videos I've seen in a while.
So awesome. I get the humor. But i actually understood this while laughing at the dame time. Thank you. Definitely subscribing.
i love your tools and the whit loctite is really badass. Greetings from Germany your videos are awesome
thanks so much for watching and sharing Chris !
Best how to guide ever. Had me giggling. Commenters need to realise there’s deliberate added comedy value. Thanks 😂
Loved it. The right tool is the tools you have!
Amazing, i have a DS DS4 and feel pretty confident with this❤
Thanks, good video, while many commenters want to snip about tools and balancing turbos are pretty simple machines.
I find the amount of people who don’t understand that this is comedy quite shocking. 😂😂😂
I love your videos and your tools
I love how you leave out the hard parts... actually getting the bolts off.. but hey very detailed and very good video!
that diy torque vise-grip ghetto rigged tool 😂😂😂hahah
I have never laughed sooo hard your tutorial is absolutely perfect
This video made it seem so much more easy. You earned my subscription. I can say I was scared to do this. Now to rebuild my Subaru turbo that's been screaming at me for weeks FIX ME! while I periodically pickup and put down the rebuild kit. Yelling NO!!!! I'm not qualified!!
as I am lefthanded I only have this left-handed clamps - now I have to find and get some right-handed for real bad ass work!
paul wyleciol you could problem get three or four righties in trade for just one of your left handers
I hope, dear friend, I hope!
As well as for my two lefthanded leatherman's, with which I repair most of my cars - as I have one metric and one of those illegal ones, like you bad ass seem to use)
good to see you using the proper tools....
you are welcome :D
unique way presented...washer machine, tools, etc...:)
Sir, You and Master Ken need to team up, his Kill Face and your left handed vise grips = Make my day!
I love this guy
Tools used seems impressive just to make the video. But rest of the skill is awesome. Liked it.
That was pretty funny. 😊 Also very informative!
Tool selection on point!
Very short and well-explained video.Thanks a lot.
Funny as hell. Loved this.
Thank you very much, Sir, for your expertise !
All I have are right handed vice grips. Can you provide a link to those left handed vice grips, please? Instant sub!
not sure. check swap meets and tool jumbles
Can you tell me where to find Chevy beat desiel turbo replacement kits and can you make a video on it....lobe ur work
Bro I love your videos. U have made me such a better mechanic. But my wife hates you and blames you for me using her kitchen to it's full potential! She just does not under stand.
+John Doe just wait until you make a motorcycle seat out of her favorite leather jacket !
Awesome idea!
She got a nice one with tassels! Perfect for a seat. Thx
this video is legendary
"Make sure to use the right tool" xD
I love your Videos, ichiban.
Since 42 years, I work on motorcycles, it seems I did everything wrong, using professional tools
the proper tool is the one that get's the job done :D
Argggghhhhh! You forgot to mention installing the circular heat shield plate against the exhaust side turbine BEFORE putting the shaft into the housing. Fortunately I noticed I had one part left over...after it was completely assembled. Otherwise, thanks for an excellent video, and for the humor too.
i agree but the most important also are the retaining ring notably the big one because this turbo will run 2mpg of oil without it
By The way that's a GT1752S Turbo off a Saab 93 or 95, Thanks for the video, It's the only one on youtube showing
At 4:33, is that a mood ring to the left of the supersonic cleaner? Also thanks for the tip on left-handed nuts!
+John Rush that's a custom hot rod blue dot . Bobdog sent me a set, but my bike only has one tail light, so I have that extra one. I posted a video of me installing that mod here on youtube
Thanks, Ichiban! I was able to rebuild my turbin with a butter knife and a spork. Now my carpet is cruising.
welcome to badass awesome status ! :D
after I get the funny spot,now I can fully understand your video. funny and useful. Love your video,thanks.
keep making more! I give you 50 at 5 Ichiban Moto sticker!
+郭牧楠 thanks for watching and sharing !
Excellent video, first of yours I've watched. I'm hooked, found you through Mustie1, I get the tools thing and find it incredibly funny. It's a nice counterpoise to the rest of the video, which is incredibly informative, and very well done. Thanks, I've some catching up to do...
I'm now totally inspired to make another video. thanks both you guys for watching :)
Weird. That looks just like the turbo on my GF's old Vespa. I didn't know you could use a two stroke turbo on a CB750. I learn something new every day around here!
Great to see how easy it can done. But can you give me some Url's where I can get the gasket and parts to rebuild it as new p;ease. I found one gasket and part set but was very expensive around 200 Euro.
Sounds just like Jeremy Clarkson type of humor, I love it!
*I really like your torque wrench... is that snap-on or blue point??*
Sir, i really need those left hand vice grip?? many thanks, you are bad ass!?
I don't have such a high precision Torque wrench. Would you have a tutorial on building one?
+James Demos yes. I made a video and posted it on youtube back when I made this one !
Hi Ichiban! I have 2 questions:
-what other kind of grease should I use to reassemble? What's "assembly grease" similar to?
-can you tell me the torque spec of the compressor nut?
Thanks, first time here on your channel!
Loving those precision tools man !!!
only the best!
love the video...thumbs up :)
Thanks for the white loctite tip.I've been using it on everything.
I'm so glad my bike doesn't have a turbo. Partially due to the incredible complexity (wizard like turbo knowledge there Ichiban) and mostly because there's no room in my tooling budget for left handed vise grips. I already have a metric set and an imperial set. Can't quite run to another! Great watch, as ever.
+Andy Man Cam then stay away from antique Brit bikes..... those Witworth grips are pricy when you can find them
I have a question - where those left-handed vicegrips metric or AF? The video panned too quickly for me to see.
HAHAHA "like this one, off of my honda civic" good one ichiban!!! you legend
+roachie305 I'm still looking for a bigger turbo
I might be able to help you find one, but i just installed a new Vtec chip in my rx7 the other day, it was difficult, i wish i had your help.
keep on making vids man, you have my whole office in hysterics every day.
we give you 6/5.5 ichiban stickers. love your work
+roachie305 bad ass ! thanks for watching and let me know what you find ;)
Can the anti-clockwise wrench be gotten at harbor freight?
After following this, I gave it a spin up using my harbor freight pancake compressor. It smelled minty fresh. Only one question: how many torks do I need to compress the thrush washer?
Did you have to bend the turbine vanes to get that bad boy to spool up on the 750?
+Matthew Holgate it's a little tiny gt008 with a .18 a/r turbine
Nicely demonstrated, well worth the 5 stars... Have a great Holiday season and see you in the new year :)
+GTs Garage ,, and have a bad ass New Year !
how about balancing the whole turbo after reassembly?
I like your precision tool , and multiple purposes domestic dishwasher, including the clock ratchet, job well done ❤, kindly can we hear it running on the car 😂🎉 , greetings from Sweden 🇸🇪
i just drill holes inthe fins it gives it a cool look i want underglow for my turbo
+martin grahdu bad ass !
LOL... you made my day!!! I needed this
+Dru Bradley you are very very welcome !
Fantastic video.
I shared your channel with AvE and his clients. He holds the patent on the Swedish Nut Lathe. All you do is round it off to the proper torque and your done, left or right hand thread doesn't matter.
+thnksno oh, I have to check into one of those !
Wow, this video was super usefull... The turbo on my front wheel has come loose, and I think that I would forget to make index marks if I hadnt watch the video... Thanks Ichiban!
Does turbo need balanced after that?
i like your pro tools
Awesome video man fhanks