Just made a build with the ARGB version of this case right before New Year's Eve. There are indeed some drawbacks as you pointed out, but they are totally acceptable afterwards.
The right enclosure definitely makes a diff, I had 5950X + 3080 in a Fractal Meshify C then I moved it to a LIan Li Lancool 216 temps at idle dropped about 6-8deg just with the difference in air flow. Awesome review touched all the things you'd want/need to know.
Thanks man I really appreciate it! Maybe in the future, I'm not sure I'm that experienced with multiple switches/bodies/key caps etc to give a solid recommendation yet though ☺
i got this case and im some heat issues with my cpu cuz it has stock cooler, but i cant afford to upgrade the cpu fan or other fans. i was wondering would removing the front panel and changing it with mesh (without upgrading any fan) . would it make get more dust in the long run?
I got this case for my partners PC. It was literally the cheapest case I could find with fans included. All parts inside are my hand-me-downs, so the hardware is a little older and less powerful hardware (GTX1080 + R7 3700X). It is loud when gaming though, even after tuning the fans myself. I'm soon about to custom water cool my rig, so was looking for information on radiator compatibility for my soon to be hand-me-down Corsair H115i (280mm). I don't want to mess around with removing the fans included and was hoping to mount it to the top, do you think it might fit if I mount the fans to the case and the radiator below? Seems odd to me that the top would support the fans but not a 280mm Radiator. A clearance issue I suppose.
Pleaseeeee , Tell me how you take off the front panel i tried to unscrew but i dont know with what tool i can do it . I hope u read this message . have a good day .
Hey man, my motherboard does not have any rgb pins. I was wondering, since the fans are LED, can I connect them through the 4pin pwm connector and still get them to light? Or I need some sort of hub or controller? Thanks!
If you got the rgb version you'll need some sort of hub or controller. They're all over amazon for like £10ish. If you got the basic led one like me, you can't adjust any of the lighting at all
It says on the website it only supports 2 140mm on the front, however it seems to have screw holes for 3. Has anyone tried using 3 140mm for this case or can anyone try?
Hey, I just got this case and generally its good but I realized that if you connect every fan, they start flashing. It's kinda annoying in the night. Is there a solution for that?
Great, I only see that after I've bought 2 of the housings. In white. I have outdated technology. i7-7700K / GTX 1050ti 4GB and the other PC also has a GTX 1050ti 4GB but an i5-6500. Do you think there could be problems? By the way, very qualitative and informative video. Thank you.
@@prestusindustries I don't think you'll have any issues, 1050 Ti is a low power GPU no issue there. The 7700K could get hot, so I would recommend a good CPU cooler, Thermalright have some really great options for air coolers if you need one. I think you should be okay with the 6500 though
@@TechHunterOfficial Okay thanks for your advice. I now have a problem. I have connected the fans and the fans are flashing / flickering / flickering all the time. At first the fans light up constantly but 5-10 seconds after starting up / restarting the PC they start flashing / flickering / flickering again. Do you know what the problem could be?
@@TechHunterOfficial thank you! The price is higher than Deepcool CC560 and is comparable with Deepcool Matrexx 55 Mesh, but I will trust your professional opinion and will opt in for Montech Air 903 Max
For over a decade Cooler Master K280 served me well, but after recent implantation of RTX 3080 it turned out that it is time for fresher air, as my M2 SSDs heat up to 51C just with short gaming session
You can connect them to your motherboard software and disable them that way. Or I think you can just keep switching through the modes until you get to the off mode.
Definitely can agree with airflow problem. Tested on old r9 290 trix, and newer rx580, temp difference was ≈8° with open front panel and top mesh filter. R9 290 dropped from 53° to 45°, and rx580 dropped from 45° to 37°. For comparison, in haf x 942 r9 290 showed 37° on idle, and rx580 shows 33°. And i didn't even compared cpu temps. So, unless you don't want your own dust collector with open front, or room heater with everything closed, i can't recommend this case. Don't think drilling holes or buying better cfm fans worth the effort
Eh,stress tests aside it's a decent enough case. Yes airflow is blocked in the middle, but overal it's not as terrible as you paint it to be. For gamer with 7600 or 7600X or 5700X or something along those lines , it's just fine. So for normal playing , nothing terrible shall happen. Wouldn't use it for 14900K or 7950X3D and RTX4090 while doing high profile Blender things, DaVinci Resolve or AI computing perhaps, but for 7600X and some midrange GPU , it's fine.
for case it says 3x 120mm at front or 2x 140mm fans but case has holes for 3x 140mm fans or i am wrong? i am looking at it and it have holes for 3x 140 mm????????? am i wrong?
Kinda regret getting this case, both my cpu and gpu (5600g, rx 7600) go over 90° on full load, haven't actually checked cpu temps with the gpu (only installed it a week ago) but i guess they would be even worse than before.
@@bighmm6301 Yeah, sorry I don't buy it. My I9 9900K and RTX 2070 super were in a crappy Chinese case with barely any slits for air in the front and rarely went to 80 on the CPU and 70 on the GPU. Where and how are you keeping the case?
Deepcool CH370 WH is a much better case at the same price point, the only downside being it comes with only 1 rear black stock fan, other than that the magnetic side panel, the hidden headphones holder and the front pattern that has better mesh and better looks makes this case a very good option, I would say a no brainer, but I can't look past the fact that you have to buy fans, but still I'd rather do that than deal with the CC560 it looks like someone had no idea what he is doing with this case in general as the airflow is extremely poor and there is absolutely nothing appealing in it either.
hoenstly ive had this case for about a year and ive had minimal crashes with low temperatures but it was kind of annoying to set up but i thought that was just cuz i had never done it before
amazing review, should have drop this earlier before i build my pc lmao. got the case and my hardware were all midrange specs, The one that getting hot was Ryzen 7 5800x, and just like you said thermals were sucks. I did undervolting, and getting a new air cooler to fix it but it did nothing. Idle temps were at 55-60c + and full load were at 90c. i did more undervolting and still the same result only the max temps at 85c. All i did was "remove the front panels" to fix all of this and the temps drastically change (it drop 15-20c now). For now i might stick to this case for a while but next ill change to nzxt h6 flow for my new case. Money well spent i guess . Anyways Love the Video!
Just made a build with the ARGB version of this case right before New Year's Eve. There are indeed some drawbacks as you pointed out, but they are totally acceptable afterwards.
Thanks! I appreciate comments like this. You completely understand everything I said before commenting ❤️
I discovered ur channel lately and for my own opinion ur channel is underrated asf u deserve more for the amount of effort u put in the video ❤
I really appreciate this comment! Thanks a lot! 💙
The right enclosure definitely makes a diff, I had 5950X + 3080 in a Fractal Meshify C then I moved it to a LIan Li Lancool 216 temps at idle dropped about 6-8deg just with the difference in air flow. Awesome review touched all the things you'd want/need to know.
Thanks - I always appreciate comments like this :)
Thank you for the detailed and unbiased review, I was gonna buy this case
Bro you are so underrated, you deserve more views than me. Keep going! Also can you make a review on keyboards? especially the razer huntsman mini
Thanks man I really appreciate it! Maybe in the future, I'm not sure I'm that experienced with multiple switches/bodies/key caps etc to give a solid recommendation yet though ☺
@@TechHunterOfficial no problem man, I'll be waiting
Bro why do I see u everywhere 😂😂
I see ur benchmarks every day men then I see you here is case review 😅
@@just_OsaMa23 😂 Thx
@@biliasfn what's your case rn?
Great review. By chance did you discover whether you can turn off the LED lights altogether?
You cannot as they are directly tied to the fans. If you see the noise test. When I set the fans to lower speeds they get dimmer
i got this case and im some heat issues with my cpu cuz it has stock cooler, but i cant afford to upgrade the cpu fan or other fans. i was wondering would removing the front panel and changing it with mesh (without upgrading any fan) . would it make get more dust in the long run?
I got this case for my partners PC. It was literally the cheapest case I could find with fans included. All parts inside are my hand-me-downs, so the hardware is a little older and less powerful hardware (GTX1080 + R7 3700X). It is loud when gaming though, even after tuning the fans myself. I'm soon about to custom water cool my rig, so was looking for information on radiator compatibility for my soon to be hand-me-down Corsair H115i (280mm). I don't want to mess around with removing the fans included and was hoping to mount it to the top, do you think it might fit if I mount the fans to the case and the radiator below? Seems odd to me that the top would support the fans but not a 280mm Radiator. A clearance issue I suppose.
Pleaseeeee , Tell me how you take off the front panel i tried to unscrew but i dont know with what tool i can do it . I hope u read this message . have a good day .
@@Frost2K24-f7i you need to get your hand underneath it and pull, pull hard
Hey man, my motherboard does not have any rgb pins. I was wondering, since the fans are LED, can I connect them through the 4pin pwm connector and still get them to light? Or I need some sort of hub or controller? Thanks!
If you got the rgb version you'll need some sort of hub or controller. They're all over amazon for like £10ish. If you got the basic led one like me, you can't adjust any of the lighting at all
@@TechHunterOfficial and the fans are molex, right? Like they only deal with the psu, not the motherboard
Okay, I'm going to buy Thermaltake Ceres 300 instead of this case.
Thanks for the review.
Thank you! Could be a good shout!
I recently bought the CC560 and removed the front panel dust filters. I also added 2x120mm fans to the top. so far its running at normal temps.
Huhh, it doesn't have a dust filter at the front
@@ARN4591 no dust filters, because i clean my pc monthly.
@@haleybelair1838 I'm saying the CC560 does NOT have dust filters, are you talking about just the front panel?
It says on the website it only supports 2 140mm on the front, however it seems to have screw holes for 3. Has anyone tried using 3 140mm for this case or can anyone try?
If you're considering 140mm fans I'd check out the CH560 instead as it's a much better case that includes 3 as standard
@@TechHunterOfficial unfortunately i already have this case for quite a while now, i was just wondering if i can fit 3 140mm. Has anyone here tried?
yea i am wonder the same, it have wholes for 3 140mm .........@@ralphcalderon2007
Hey, I just got this case and generally its good but I realized that if you connect every fan, they start flashing. It's kinda annoying in the night. Is there a solution for that?
@@dzejdi5021 don't connect them all to one fan header and split them up
@@TechHunterOfficial I just did that. They still flicker.
i just got the case and watch your video, unfortunately :(. now is it good with 9600x and 4070 ? i mean 7 degrees isn't that much
@@aminvand firstly I wouldn’t recommend the 9600X to anyone, just get a 7600 and save loads of money’s to buy a better case or gpu or anything!
Great, I only see that after I've bought 2 of the housings. In white. I have outdated technology. i7-7700K / GTX 1050ti 4GB and the other PC also has a GTX 1050ti 4GB but an i5-6500. Do you think there could be problems?
By the way, very qualitative and informative video. Thank you.
@@prestusindustries I don't think you'll have any issues, 1050 Ti is a low power GPU no issue there. The 7700K could get hot, so I would recommend a good CPU cooler, Thermalright have some really great options for air coolers if you need one. I think you should be okay with the 6500 though
@@TechHunterOfficial Okay thanks for your advice. I now have a problem. I have connected the fans and the fans are flashing / flickering / flickering all the time. At first the fans light up constantly but 5-10 seconds after starting up / restarting the PC they start flashing / flickering / flickering again. Do you know what the problem could be?
power them from hard drive molex cable not the mainboard. with this case you want them running top speed anyway. @@prestusindustries
i want to put in it, when i buy it a i5 12400f, rtx 4060, 32 RAM ddr4, 650w is good choose? i want to play cs2, farming simulator 22, ets2.
Can you recommend a budget case with good thermals? (I have RTX 3080, 11700KF, 2x3.5 HDDs, 2xM2 SSDs, looking forward to 4080 next year).
Montech Air 903 Max is a great option
@@TechHunterOfficial thank you! The price is higher than Deepcool CC560 and is comparable with Deepcool Matrexx 55 Mesh, but I will trust your professional opinion and will opt in for Montech Air 903 Max
I've got a review hopefully out soon on the montech, though it does come equipped with 4 x 140mm fans they're not completely silent at idle.
For over a decade Cooler Master K280 served me well, but after recent implantation of RTX 3080 it turned out that it is time for fresher air, as my M2 SSDs heat up to 51C just with short gaming session
Yeah the newer components love the fresh air. Another alternative to the Montech Air 903 but comes with much quieter fans the Deepcool CH560 👍🏼
Is there a m-atx case you recommend around the price of this case? Thanks for the video anyways!
Msi mag forge 112r or 100r are decent options that include fans for a similar price 👍🏼
Hey man, nice video. You helped me to choose. But i have a doubt, is there any way to turn off the lights of the fans?
You can connect them to your motherboard software and disable them that way. Or I think you can just keep switching through the modes until you get to the off mode.
How can I remove the front side to clean the fans? Is it possible to remove that? Please reply!
Yes it is possible, you need to get your hand underneath the case at the front and pull. You should feel a gap for your hand to go in
@@TechHunterOfficial Yeah,I did it. Tysm for your reply..😊
Definitely can agree with airflow problem. Tested on old r9 290 trix, and newer rx580, temp difference was ≈8° with open front panel and top mesh filter. R9 290 dropped from 53° to 45°, and rx580 dropped from 45° to 37°. For comparison, in haf x 942 r9 290 showed 37° on idle, and rx580 shows 33°. And i didn't even compared cpu temps. So, unless you don't want your own dust collector with open front, or room heater with everything closed, i can't recommend this case. Don't think drilling holes or buying better cfm fans worth the effort
Hey man I just bought this case and I'm confused on how to connect the fans should I get a fan hub;
The fans include a splitter, just connect them to each other, then the last one can connect to a header on your motherboard
I got a 3770 and an rx 580 and no plan od upgrading, should i buy this? I really really love how it looks
@@Reposted3000 i really don't recommend it, especially when Montech has much better cases for the same price
@@TechHunterOfficial yeah but my parts aren't high end at all, what about the V2?
the 360mm aio arctic can fit in front? Is more thick than normale rad of aio, can you please check?
How am I supposed to check 😂? Just check the dimensions for both items on their respective websites
@@TechHunterOfficial thank you
@@TechHunterOfficial i can't find the dimensions in the deepcool website
I have the cc560, it's find by me but I would like to know if the fans are replaceable? Can u pls tell me
Yeah the fans are replaceable!
a valid mid tower case? I'm undecided between 4000D and NXZT h5 airflow. I was looking for an elegant case with good air circulation efficiency
How to change rgb light, i have cc560 with rgb coolers, i connected it to controller with go with corpus
hey guys. you see the mic/audio headphone hole in this pc, does it allow you to use a headset as a mic and audio?
Yeah
is there anything wrong with just drilling nice holes into the front panel? it seems like the only problem with this case is air flow
I'd honestly recommend spending an extra £10 to get the montech air 903 max! Includes 3x 140mm argb fans at £59
hey i cant remove the front panel i dont wanna pull too hard because i might break it. any help?
Pull harder 🤷🏻♂️
What is the liquid cooling model you are using on that CPU?
It's linked in the description ☺
thank you
@@TechHunterOfficial
Eh,stress tests aside it's a decent enough case.
Yes airflow is blocked in the middle, but overal it's not as terrible as you paint it to be.
For gamer with 7600 or 7600X or 5700X or something along those lines , it's just fine.
So for normal playing , nothing terrible shall happen.
Wouldn't use it for 14900K or 7950X3D and RTX4090 while doing high profile Blender things, DaVinci Resolve or AI computing perhaps, but for 7600X and some midrange GPU , it's fine.
I like your reviews brother, it's well-written and serves its purposes, though if I had to add something odd, you kinda resemble Rowan Atkinson
He's a rich, successful man. I'll take it, more Jonny English than Mr Bean though 😂
Hello, how can I control the rgb from the case?
for case it says 3x 120mm at front or 2x 140mm fans but case has holes for 3x 140mm fans or i am wrong? i am looking at it and it have holes for 3x 140 mm????????? am i wrong?
I agree, I think it does have the holes but I wouldn't spend your money on 3x 140mm fans to put in this case and get something else instead.
Thanks for saving me a big ol' headache, 50 rage episodes and a bunch of cash. Cheers!
Have you got a link for your glasses? 👀
Haha, unfortunately not!
Great video 😊
Thanks! 😊
Ye i agree great vid😊
I bought a PC with this case but when I turn it on, the fan lights blink. Does anyone know how to fix it?
what app do you use for fan speed?
Fan control
Kinda regret getting this case, both my cpu and gpu (5600g, rx 7600) go over 90° on full load, haven't actually checked cpu temps with the gpu (only installed it a week ago) but i guess they would be even worse than before.
That's almost certainly not an issue with the case, dude. That hardware won't reach 90 on full load even without case fans
@@Liminal.Headspace Case fans don't do much when choked by a solid plastic front panel, there is simply not enough airflow in the case
@@bighmm6301 Yeah, sorry I don't buy it. My I9 9900K and RTX 2070 super were in a crappy Chinese case with barely any slits for air in the front and rarely went to 80 on the CPU and 70 on the GPU. Where and how are you keeping the case?
Yes if your building your grandparents a low power basic PC with ability to access the Internet, but for anyone else there are much better options.
Deepcool CH370 WH is a much better case at the same price point, the only downside being it comes with only 1 rear black stock fan, other than that the magnetic side panel, the hidden headphones holder and the front pattern that has better mesh and better looks makes this case a very good option, I would say a no brainer, but I can't look past the fact that you have to buy fans, but still I'd rather do that than deal with the CC560 it looks like someone had no idea what he is doing with this case in general as the airflow is extremely poor and there is absolutely nothing appealing in it either.
nice
Nice
Anyone know how to disable the LED Button led on top that shit keep flashing on mine gives me headache when i look at it
The hdd led? Just unplug it - it’s plugged in next to the power switch
hoenstly ive had this case for about a year and ive had minimal crashes with low temperatures but it was kind of annoying to set up but i thought that was just cuz i had never done it before
Does anyone know how to turn of fan led? They are giving me a headache
If you have the non-rgb version you can't. Unless you kill the voltage to the fans entirely and turn the fans off
these are pwm fans right?
Nope, they are not
Can I Install micro- atx case ?
Yeah of course!
Got sapphire radeon 6900xt and noctua nh-d15 chromax black cpu cooler. I hope both of them fit in this case.
They fit ?
@@عبدالرحمنالقرشي-ط2ج they don’t cpu cooler doesn’t fit
@@tysonmontana2303 the cpu cooler is too damn biiig
I have this case, I have no issues with it
How do I mount the fans on the front
I have a 280x140mm radiator
how to change rgb ???
You can’t
How can i turn off the rgb of this case fans?
press led button and hold
Does anyone know how to turn off the led lighting?
Try to hold the Led Button until the lights are off
@@XrmR-vr8yiunfortunately I don't see this pc box having a LED button?
If i buy this case then i will cut out that garbage plastic front panel and replace it with cheap aliexpress mesh.
thanks,would a full atx mobo fit in it
Yes it would
thanks
@@TechHunterOfficial
That stupid line down the middle annoys me so much
Actually not really anymore
@@zGoalOfficial😂
If I find an issue with the middle section of the front panel I'm probably gonna drill some holes and melt a mesh panel behind the holes.
I got mine for 43 bucks worth it.
Ty almost bought this..ill skip this case. Cheers and ty
leds flicker
nahhhh the TT S200
old version
Old video
Wdym old version? Is there a new one that’s better??? Plz reply
@@eratzmoovando7630CC560 v2, I think the airflow is better, because it has more holes in the front.
По-моему ты нихрена не знаешь что несёшь 🤣
Я не говорю по-русски
amazing review, should have drop this earlier before i build my pc lmao. got the case and my hardware were all midrange specs, The one that getting hot was Ryzen 7 5800x, and just like you said thermals were sucks. I did undervolting, and getting a new air cooler to fix it but it did nothing. Idle temps were at 55-60c + and full load were at 90c. i did more undervolting and still the same result only the max temps at 85c. All i did was "remove the front panels" to fix all of this and the temps drastically change (it drop 15-20c now). For now i might stick to this case for a while but next ill change to nzxt h6 flow for my new case. Money well spent i guess . Anyways Love the Video!