Below are my affiliate links to the tools you would use to complete this job. I may receive a small commission from the product sales. Thank you! Automotive trim and clip removal kit: amzn.to/3KgKGfg Small flat blade screwdriver set: amzn.to/44HUoQi 1/4" impact driver kit: amzn.to/48he4LZ Impact driver socket adapter set: amzn.to/44XTTkI Rechargeable LED mini work light: amzn.to/3Y74OpY
Hi Viktor! Any experinces runing cables trough the firewall on an Lexus rx -12? Im about to install an DEFA blockheater + electrical coupeheater. Any advise on easiest way trough tha wall?
@@philipd6529 hi, you can either drill a hole wherever it is convenient and install a rubber grommet in it and run the wire through, or poke a hole in one of the existing grommets where the main wiring harness goes through the firewall and pass the wire in that way.
Hi Viktor! Where are you based out of? I feel like mechanics in NY are not well versed on my 2009 rx350 and Im sure you can get to the bottom of why my car keeps rattling. I changes my rack and pinion to an oem part, wheel alignment, balanced wheels and I still cant figure it out. I'd rather go to someone who knows what theyre doing so I can keep this car - I know its worth keeping
Thanks so much for your quick response. My Lexus dealer added it on to my quote for a 30k service and I don’t understand why I would need the throttle body cleaned this early on. Is a throttle body cleaning more of a “as needed” service?
Hi Victor, I have a 2020 RXh luxury. The front parking sensors under the drivers headlight has fallen into the bumper. Cars was purchased CPO in spring, but dealer wouldn’t fix. Was quoted $800. So I bought the clip and went to local body shop, they quoted $500 even with the park. Said bumper will need to come off. We had this same problem on 13 GS, said spot. I was able to go behind the drivers wheel liner to put the sensor back in. I was wondering if I could do this for the RX but wasn’t sure how to remove the wheel liner for drivers side. Do you think this would work, or bumper should come off? Can you show how to access the wheel liner. I already purchased the $30 sonar clip from the parts department. Thanks very much.
Hi, I can’t recall specifically on that model year, but usually you can access the outermost sensors without removing the bumper and the rest of them require bumper removal. To get the wheel well liner out, I usually remove the wheel and then the liner is held on by a few clips and screws. Normally you just remove the front portion of it for access, not the whole thing.
Below are my affiliate links to the tools you would use to complete this job. I may receive a small commission from the product sales. Thank you!
Automotive trim and clip removal kit: amzn.to/3KgKGfg
Small flat blade screwdriver set: amzn.to/44HUoQi
1/4" impact driver kit: amzn.to/48he4LZ
Impact driver socket adapter set: amzn.to/44XTTkI
Rechargeable LED mini work light: amzn.to/3Y74OpY
Hi Victor can you please do a complete engine coolant change on a nx 200t, would be much appreciated.
@@charlesfrost6172 will do if I ever get a chance in the future, thanks!
do you have a video up explaining spark plug and fan belt replacement for 2022 Tundra
@@joyboyboy unfortunately, not at this time
Виктор приветствую! Можете снять видео о замене антифриза для Toyota Sienna 2021?
@@Almaty_Kazakhstan hi, I will try to get around to it one day, thanks!
@ appreciate it brother!
Hi Viktor! Any experinces runing cables trough the firewall on an Lexus rx -12? Im about to install an DEFA blockheater + electrical coupeheater. Any advise on easiest way trough tha wall?
@@philipd6529 hi, you can either drill a hole wherever it is convenient and install a rubber grommet in it and run the wire through, or poke a hole in one of the existing grommets where the main wiring harness goes through the firewall and pass the wire in that way.
Hi Viktor! Where are you based out of? I feel like mechanics in NY are not well versed on my 2009 rx350 and Im sure you can get to the bottom of why my car keeps rattling. I changes my rack and pinion to an oem part, wheel alignment, balanced wheels and I still cant figure it out. I'd rather go to someone who knows what theyre doing so I can keep this car - I know its worth keeping
@@louismarquez9562 hi, I’m in Alberta, Canada
Victor, can you tell me how often you should clean the throttle body on a 2022 Lexus NX 350?
@@brianblair5643 it’s not really a part of regular scheduled maintenance, so there is no interval for it
Thanks so much for your quick response. My Lexus dealer added it on to my quote for a 30k service and I don’t understand why I would need the throttle body cleaned this early on. Is a throttle body cleaning more of a “as needed” service?
@@brianblair5643 yes, exactly. It sometimes needs to be cleaned after battery replacement to stabilize idle speed. 30K is way too soon in my opinion.
Hello Viktor
Do you know how to install Lexus PW162-0E00 weather shield
@@kingstonusb that does not appear to be a valid part number as they are supposed to be 10 characters long not including the dash
Hi Victor, I have a 2020 RXh luxury. The front parking sensors under the drivers headlight has fallen into the bumper.
Cars was purchased CPO in spring, but dealer wouldn’t fix. Was quoted $800. So I bought the clip and went to local body shop, they quoted $500 even with the park. Said bumper will need to come off.
We had this same problem on 13 GS, said spot. I was able to go behind the drivers wheel liner to put the sensor back in.
I was wondering if I could do this for the RX but wasn’t sure how to remove the wheel liner for drivers side.
Do you think this would work, or bumper should come off? Can you show how to access the wheel liner. I already purchased the $30 sonar clip from the parts department. Thanks very much.
Hi, I can’t recall specifically on that model year, but usually you can access the outermost sensors without removing the bumper and the rest of them require bumper removal.
To get the wheel well liner out, I usually remove the wheel and then the liner is held on by a few clips and screws. Normally you just remove the front portion of it for access, not the whole thing.
Hello, we’re are you located? Thanks
@@sparkles2018 Alberta, Canada