Step by Step Guide: How to install VSETT 9/9+ Honeycomb Tires
ฝัง
- เผยแพร่เมื่อ 21 ก.ย. 2024
- All Scooterheads! Follow us on...
IG: / falconpev
FB: www. fal...
Applies to all VSETT 9/9+/ZERO 9 motor installation. Guide screws will be provided with every purchase of our honeycomb tires.
Difficulty level: Medium
Find out more about the featured product and more amazing e-scooter related products at www.falconpev.....
Heloo, where I can buy this tire in Europe?
I do not encourage lubricant. I used the exact same stuff used in this video, and it created a couple of problems.
1st - While putting the tire on, even though it was certainly easier to get the tire on the rim, it also would move on the rim if I wasn't careful, which misaligned the screws with the grooves on the tire. I had to manipulate it a bit to get it realigned.
2nd - I took the scooter for a test drive and discovered that, while turning, the tire would slide just enough on the rim to give you the sensation of having a flat tire. I felt very nervous turning at any speed above 10 mph.
Use a lubricant that can dry up quickly.
Please, how did you solve the problem with swimming over 25 km?
Mám pocit že dosť pláva táto pneumatika, hlavne v zákrute. Dúfam že si nato zvykneme...
Inak návod super.
Did you guys use Loctite for the screws at all? I watched another video a while back that Loctite is important for those screws. That being said, I am new to e-scooters. Is Loctite important and which screws should I even use it for?
Great video by the way. I appreciate the step-by-step process.
Yes we do but not the strongest loctite, just the blue one
@Sister Mary Clements check your screws if they are still there
Dear Falcon, thanks for this second video. I followed the first video, the one displayed on your website at the page for the tyre, and i could not install it. I think it would be a good idea to remove it from the website and only show this second video. I am going to try using the lubricant this time, i hope it will work. In some other videos, (honeycomb tyre for xiaomi), some people boil their tyre in water to make it more tender before installation. Would you recommend that trick ? Thanks in advance
No we don’t, it changes the composition of the rubber
I've seen a lot of reviews of the rim spinning in the tyre while cornering and accelerating, do you have any ideas how you could stop this from happening? Maybe like a gel like lubricant that turns sticky or acts as a glue when hardened? I can't find any like that best I can think of is using locktight, any solutions for this problem?
What kind of screws did you use?
It's the problem with us right now.
And I mean the long screws :)
We provide the long screws together with the tire
I bought mine and it did not come with any guide screws. is it possible to do it without them. If i need them, where would i be able to buy them?
It needs the guide screws otherwise it’s virtually impossible to fit
What breaks are you using for that 140mm rotor disk? I want an upgrade for my stock breaks but i dont know yet what fits
In the shop there are 2 options: with or without installation. Could you explain what does it mean? Is it additional cost of work or instruments?
with installation is not possible unless you live in the same city as us.
turkiyedeyim bu lastiklere nasıl ulaşa bilirim kendim taka bilirim kardeşim
english?
@@FalconpevSg sorry turkish :(
@@FalconpevSg he wanted to know from where to buy the tires, bcoz he said that he can install them all by himself 👌
Where can i buy the 3 long quide screw?
It comes with every tire