Amazing video, just love all the work with welding and polishing. I think I would have just polished it and then put some clearcoat on it. Just to se the beautiful work.
Hello my name is Noah. I am in a CNC machining program with my high school. But my passion is biking and working on bikes. Do you have any tips on how to get to where you are in the realm of biking. And do you guys offer apprenticeships
@@collinmcdonald1599 I wouldnt be so sure. I did count a bit: 4500 pound frame, so 5750$. XTR 12 speed casette is 450$, XTR cranks are around 500$ XTR rear deraulier - 250$. XTR 2x12 front deraulier - 70$, SLX 12 speed shifter - 40$, same as the 2 speed one - 40$. Brake rotors seem to be Sram Centerline, they are 100$ for a pair. That rigid fork was propably between 400 and 1000$. Wheels were at least 1200$ if they are alluminium, if they are carbon then they were at least 1400$. Stem was anything between 40 and 100$, pedals from 40 to 100$ as well. Bamboo handlebars are around 200$, valves are around 20$ per pair, all bearings, axles and bolts were under 180$ for sure. Triangular sacks are not very expensive, they are around 80$, the other two sacks were propably around 80$. 5750 + 450 + 500 + 250 + 70 + 40 + 40 + 100 + (fork - lets say)600 + 1400$ + (stem -)70 + (pedals -)70 + 200 + 20 + 180 + 80 + 80 = 9900 if I used the calculator correctly, which might vary as it is 2am and I came back from work just 2 hours ago.
I was wondering the same thing. spend 10k on a bike and cheap out on the shifter... cheaping out on something you'll be using every minute on a bike like this is just ridiculous. What's an extra $200 on shifters for a bike like this...
@@collinmcdonald1599 Excactly... I have a Saint(Shimano's top DH groupset, an the same level with XTR) 10 speed shifter on my 1200$ 26inch bike, it was like 15% of the bike's value, bought it for the double release, and of course to flex on my friends.
The frame alone was 4500 pounds, so around 5750$! The wheelset was at least 1200$, XTR Drivetrain is around 1500$, XT brakes without rotors are 250$ for a pair, Pirelli scorpions are 180$ for a pair. I know that you didnt say that it was around 5000$, but this bike was more expensvie than it looks. I listed only a few parts, the whole bike was at least 8000$, pretty insane amount for a bikepacking bike.
May I just ask, what is the new greese you are using? Seemes very thick and guwie 😅Is there any reson you are using it in todays build or have I just not seen you use it before🤔 Either way, thankyou for the video!
@@collinmcdonald1599 Why go wider than 2.4? It is not a fatbike. Also scorpions are so good that they have more grip in the 2.4 variant than most high end 2.6 tires, yet they have very very low rolling resistance.
fillet brazing is about the same amount of work, with prettier results, and is just as strong as tig welds. If I had a fillet brazed frame, I'd want it clear coated to show off the craftsmanship.
Cool video. Curious why you're welding steel tube joints with bronze filler rod? Bronze isn't as strong as steel. Is this a common practice in the bike industry?
Yeah it’s a particular welding method called brazing, silver rods (well an alloy with a variable percentage of silver) are used as well, normally it’s considered better than tig for a minor thermic shock in the welding area and so a more robust and flexible junction. On the other hand it’s slower and more expensive
brazing is just as strong as welding for bike frames, if not more so. it's only common for bespoke builds, as it takes more time to get the joints nice and smooth and pretty.
![ALLY - OH MY! [ REACTION ] 'Amarin Nitibhon' #ALLY_OHMY #ALLY #allynitibhon #แอลลี่](http://i.ytimg.com/vi/nX9qpHjVfbQ/mqdefault.jpg)
If you're interested in having your own bespoke bicycle made, check out the link below and get in touch!
www.gritspokebikes.co.uk
Your videos are very knowledgable
Please giveaway some parts
Ваша ссылка не открывается.
9900$. How close is my guess on how much was that bike?
It's beautiful, perfectly built and elegant.
It's also a bikepacking bike that screams "STEAL ME"
Those wooden bars got me 💙
I will live in that garage is like heaven 💪 nice hands bro
Bikepacking ready with a nice handlebar. 👍🏼👍🏼
another WONDERFUL CREATION, more of this HAND BUILT VIDEOS, watching makes it RELAXING. . . .
Wow. Possibly the best yet. Thanks.
Watching this video is like mindful meditation soothing and elegant. Thanks for posting the video
That's a wood handlebar? O M G
This bike looks so so sick 🤩
Congrats for the hard work you are doing with this channel. From far my fav channel ⬆️📸❤️
Would love to see what you guys could dream up in regards to a low rider/ cruiser/ chopper.
Amazing work, components, people and bike!
Merry Christmas
Amazing video, just love all the work with welding and polishing. I think I would have just polished it and then put some clearcoat on it. Just to se the beautiful work.
my favorite color combination 😁
I love building bikes.
Perfect amount of orange! Small accents make the biggest impact.
When I saw how long the video, I said to myself, "I'm in for a treat!" Awesome!
Hppy Christmas
Gracias por esta obra de arte🙏🏻😍
usted no se imagina, cómo amo ver estos vídeos , cada segundo!!!
Merry Christmas and a happy new year sir gee.
Awesome mtb bicycle i like it
just:Gorgeous
Lovely youtube channel .. 🇨🇴🇨🇴🇨🇴 Full support from Colombia where cycling is a life style
Now this will get me into bikepacking! 😍
Amo las bicicletas y siento una paz al ver estos videos.
All I can say is Wow. Dream Bike 🚳
great job
Cada vez me impresionan más sus videos🙌 lo extremadamente prolijos que son en cada cosa y con cada detalle🙌 esto es arte💥😎
Awesome work, Amazing...
Very very nice
Wow! its nice 👌
Thanks for sharing such a nice video!
Amazing Work...
MANTAP MAS....SEPEDAH...nya 👍👍👍
no comment, perfect like always
My dream bike
Wow nice I like the work 😀😀
Awesome!!!
the guy who builds the frame is Tony Stark!!! Beautiful bike , amazing video. I love it
Nice! 👌
Asli keren lu bang 👍🏻
great workkkkk
Seus vídeos são satisfatórios de Assistir :)
KEREN PARAH ASLII 👍💯
Nice bike 😊👍🏻👍🏻
That's just a work of art. :)
Wow nice build...and i wish could i have that mtb...
Shout out
Hermosa bicicleta una obra de arte
I'd love to see you build a polo bike!
=interesting, so satisfying!
I wanna see a Gravel Bike starting from frame building aswell 👀
I like that
Nice
Amazing built. Beautiful paint job. I hope the owner uses helicopter tape or the paint would be ruined in the first trip.
Πολύ ωραία δουλειά που κάνεις.στην πένα το ποδήλατο.
Are those bars actually made of wood???
Me gusto el video
#Eagerly waiting
Woooow 😯
Muito bom 🇧🇷
Valve stem candy jar 😋
Nice build, but when steering, the strap of the front bag scratch the paint ;-)
Einfach perfekt …👍👍👍👍ich Feier euch
Hello my name is Noah. I am in a CNC machining program with my high school. But my passion is biking and working on bikes. Do you have any tips on how to get to where you are in the realm of biking. And do you guys offer apprenticeships
And I would love to be able to get in contact with you.
Yes, awesome, a great bike. How much does that cost?
Тоже интересна цена
www.gritspokebikes.co.uk/the-frames
12k at least
@@collinmcdonald1599 I wouldnt be so sure. I did count a bit: 4500 pound frame, so 5750$. XTR 12 speed casette is 450$, XTR cranks are around 500$ XTR rear deraulier - 250$. XTR 2x12 front deraulier - 70$, SLX 12 speed shifter - 40$, same as the 2 speed one - 40$. Brake rotors seem to be Sram Centerline, they are 100$ for a pair. That rigid fork was propably between 400 and 1000$. Wheels were at least 1200$ if they are alluminium, if they are carbon then they were at least 1400$. Stem was anything between 40 and 100$, pedals from 40 to 100$ as well. Bamboo handlebars are around 200$, valves are around 20$ per pair, all bearings, axles and bolts were under 180$ for sure. Triangular sacks are not very expensive, they are around 80$, the other two sacks were propably around 80$.
5750 + 450 + 500 + 250 + 70 + 40 + 40 + 100 + (fork - lets say)600 + 1400$ + (stem -)70 + (pedals -)70 + 200 + 20 + 180 + 80 + 80 = 9900 if I used the calculator correctly, which might vary as it is 2am and I came back from work just 2 hours ago.
Beautiful bike a film. Who does the filming for you?
Really nice build! But why is there an SLX shifter on an XTR groupset?
I was wondering the same thing. spend 10k on a bike and cheap out on the shifter... cheaping out on something you'll be using every minute on a bike like this is just ridiculous. What's an extra $200 on shifters for a bike like this...
@@collinmcdonald1599 Excactly... I have a Saint(Shimano's top DH groupset, an the same level with XTR) 10 speed shifter on my 1200$ 26inch bike, it was like 15% of the bike's value, bought it for the double release, and of course to flex on my friends.
Parabéns bicicleta preta e laranja 🙂🙃😊👏🏿👍
Nice built. Sram disc rotors on a full shimano bike?
Genial 👍
🔥 🔥
Are the handlebars really wood?
Bamboo to be excact.
Time couldn’t go slower right now
5 Nm! ☝️
Pardon my dumb brain!!
What was the reason to do brazing and not tig/mig weld the joints
Is there any specific reason?
👏👏👏
Now this is a bike worth paying $5000.00+ for!
The frame alone was 4500 pounds, so around 5750$!
The wheelset was at least 1200$, XTR Drivetrain is around 1500$, XT brakes without rotors are 250$ for a pair, Pirelli scorpions are 180$ for a pair.
I know that you didnt say that it was around 5000$, but this bike was more expensvie than it looks. I listed only a few parts, the whole bike was at least 8000$, pretty insane amount for a bikepacking bike.
Show Gostei 🏴☠️⚡🏴☠️
.
May I just ask, what is the new greese you are using? Seemes very thick and guwie 😅Is there any reson you are using it in todays build or have I just not seen you use it before🤔 Either way, thankyou for the video!
That's juice lube, they using it quite some time now. It's made for wet and low temperature conditions. Basically made for UK riding.
@@petrsupita thankyou 🙃
Muito linda perfeita top👏👏👏👏👏👏💖🇧🇷
How hard is it to actually put tires on with cush core installed???
👏🏻👏🏻👏🏻👏🏻👏🏻
👍
Sa sa va me plaire !!!😍
What grips are those?
Yeah, i've never seen them before...
I'm from the future .. this guy start the video with himself mining the iron ore and make it steel for the bike frame.
what you put in the wheels
Why is there so much clearance between the front tire and the fork? Is the frame designed for a suspension fork?
It’s a suspension-corrected build.
A mtb suspension fork can be installed without affecting the bike stance.
makes me wonder why they didn't go with wider tires...
@@collinmcdonald1599 Why go wider than 2.4? It is not a fatbike. Also scorpions are so good that they have more grip in the 2.4 variant than most high end 2.6 tires, yet they have very very low rolling resistance.
👍🔥🚲
🇧🇷
Ok I have said this a couple times but no. THIS is now peak dream build. This has to be it!
Did anyone catch what cassette that was? With the double upfront it looks like a cheeky illegal gear range.
It is Shimano XTR CS-M9100 10-51 or 10-45 casette.
Хороший получился.
Isn't that a lot harder than arc welding?
fillet brazing is about the same amount of work, with prettier results, and is just as strong as tig welds. If I had a fillet brazed frame, I'd want it clear coated to show off the craftsmanship.
@@collinmcdonald1599Excellent idea!!
Cool video. Curious why you're welding steel tube joints with bronze filler rod? Bronze isn't as strong as steel. Is this a common practice in the bike industry?
Yeah it’s a particular welding method called brazing, silver rods (well an alloy with a variable percentage of silver) are used as well, normally it’s considered better than tig for a minor thermic shock in the welding area and so a more robust and flexible junction. On the other hand it’s slower and more expensive
brazing is just as strong as welding for bike frames, if not more so. it's only common for bespoke builds, as it takes more time to get the joints nice and smooth and pretty.
Retro gravel bike build?
Why retro? The only retro like looking parts here are the crank and the bamboo handlebar.
😯🤩👍🏻 size?
Imagine putting synthesis wheels on a bike with a rigid fork
imagine having an xtr drivetrain and SLX shifters...