Buyer Beware: What to look for when buying an ATV
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Lots of janky atvs out there boys and we're gonna show you how to inspect an ATV and gauge for yourself if you want to buy it or not!
Get up in this video and you'll be buying like a pro in no time!
Compression / spark tester: amzn.to/3gwKdHn
Compression gauge: amzn.to/3wwDDWY
Merch Shop: www.timemachin...
Insta: @timemachinesatvs
FB Group: / 253442778458579
Send us your videos and non weird mullet sh*t: timemachinesatvs@outlook.com
Send us your love letters to:
TimeMachines
P.O.Box 210
Rhome, TX. 76078
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? ( part : 1/2 ) [โกงไหมครับ ep.89 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
I use my finger as a compression tester and spark tester 😂
Dude make a 3 wheeler hell ya
2 in the pink one in the stink lol, get up in there
Golden
It works. Just not super accurate
I went to pick up a 💩Polaris and the guy said it ran then, when I got there the motor was locked up and when I went to pull the pull card water started pouring out.🤣🤣
Lmfao
I'm up in here everytime share share share fella s n girls who ridelets get Jarrod n Blake 20 k best ATV fixes n funning around on you tube thank you guys for posting up
Thanks henry!! Another posting today
Get up in there! Can't wait to see the first video in the new shop.
Same here i am excited
Get up in there
Yessir
Allen head sockets or atleast wrenches for a tool kit. Great video topic appreciate it. Western Pennsylvania we see alot of rough quads around here but it was a nice refresher to watch. Greasy side down!
Yeah def good to take with ya!! Get ya a better look with em
As always love learning videos you make take care my friends
Thanks kevin another coming today
Damn good shit as usual appreciate the tips y'all be safe out there because shit does happen!!!! and I'm up in here
Thanks marquis
Thank you sir🤘🏻
You bet riley
Another good video,you guys rock!!
Thanks bobby! Another posting today
I always get up in there and look at everything I can and flip her up to get up in there
Haha ya got to Brandon
Rule number 1 never take someone word on nothing
Haha for sure matt
Also when looking at used dirt bikes and quads ......don't be afraid to get up in there!!!! CHA!!!
Haha better get up in there asap
Very informational nd important vid boyz !! Me personally I bring bike stand & put all my bikes on stand, start it, if it runs, run thru the gearz, check clutch, throttle, how well it spins & if there is any noises, check brakes & chain. That way its in front of buyer to show or hear cause when u test ride it and notice u come back nd tell the seller and they be all stupid nd say ""well that didn't do that to me"" or don't believe you. Its just something I do. But omg I thought I've seen it all brother haha holy shit that crackhead fix is the absolute worst I've ever seen. I mean the gap alone is a mile long lol....thank God yall didn't ride it or it woulda been hella bad boyz
Good advice cary. We appreciate ya
That's cool man teach him how not to get ripped off
Appreciate it brian
Wish this video came out a couple of months ago, went to buy an 1986 quadracer( turned out to be an 1987 Lt250r frame with a KTM 250 sx 97 motor) for 1500. Guy said all it needed was back brakes and tune up. Turns out it needed a whole engine rebuild and the frame was cracked and A arms are bent 🤦🏾♂️🤦🏾♂️🤦🏾♂️😑😂 bike was definitely worth 500/600$ tops. Lesson definitely learned
Damnet that sucks rodney.
Please make a blaster 3 wheeler
I am considering it!!
Cha dudes 🍻 Keepin it real 4-sho! 🤙
Yessir
Little jb weld will hold it! Another tip- I would also check the airbox and or make sure there is a filter on it. Also it will tell you weather or not they did maintenance, aka, air filter oil.
Yessir we def do!!
sheeeeeeeeeeeeeeeeeeesh, nice vid just bought a 400ex 2001
Appreciate it danimals. Another posting today. Time to ride!
Get up in there boys wear a Jimmy cap when you go for a ride be safe lol
Lmfao def be safe
Bring a buddy with you just incase stuff goes down ,/ so you don't make a bad decision because it's something you wanted for a long time
Haha thats a good one too. Appreciate it joel
Do the hybrid. No one is doing stuff like that. I did tell you to do this. But a cr500 motor might be cool in a trx450r frame.
I built a cr500 trx then parted it oit afterwards couldnt get 3500 for it. And they rattle like hell with no counterbalance
Check to see if your vehicle is oil-cooled water cooled or air cooled.
Haha always. Whats a blaster hotrod?
Are you being serious when you said something about they didn’t know about the “crack” in the frame?
According to them yes they said they didnt know
You can find a titled frame on ebay for around 300... well lol thats what i payed about 6 months ago for a blaster frame 😅 i know I'm not telling you anything you don't already know lol. Thanks for the content! I'm gonna go get up in there 🤪
Man I never even thought of that, thanks for reminding me!
We appreciate ya leonard!! I have 2 frames here that are in useable shape
I got an extra lt250r radiator cover piece for that astro conversion if thats what you need?…. Its blue.. you paypal shipping, its all yours brother! Love the channel! You guys are awesome! Lil race clip at the end was such a tease! Looked like astro can hang right with the 250r!! 😳
Haha we appreciate it eric. Ive ordered a black one already or id take ya up on it. Full video posting today!
Bro I have a A frame at my house I literally live three minutes from you how much would you sell that to me for
I think its getting turned into a 3 wheeler.
I bought a 400ex last night took a decent look but not good enough because the front right disk wasn't there the rear hub was cracked the rear real nut was loose and so much little stuff but the frame was cracked BAD and smokes but ill probably keep it but its a money pit and I paid 1700$🤦♂️
You loose
Ride it till she quits
Jarrod I picked up an atc185s for $400, is it worth restoring
Depends on what it will cost and what you can sell it for tbh
Channels awesome I can’t wait for you to grow u r a smart dude
You should bring that kd80x to kentucky lol I need that thing
Lol i bet
Dude's! It would be so awesome if you made that blaster a trike! So so cool. Ain't nobody else gonna have one, in fact y'all may be the first! Thanks for the vid boys!
Considering it!
And if anyone tries to stop you from standing it up or doing a thorough inspection just go ahead and turn and walk away
Haha fo sho
All due respect, you lift the shit in my driveway and scratch the fuck out the grab bar we gonna have a problem 😂
I'm not going to understand stopping me if I was trying to lift it up on concrete honestly lifting it up on its back bar or something I've always done because you can see a lot more under it it's always the first place people Miss cleaning and if you got an oil leak that's only where you're really going to find out and if you got a bent frame or the bottoms got rust holes in it or anything like that you can't see it from the top or like the case in the video
@@FarmerBrown420 oh absolutely bro!! Not denying the action.. just trying to justify saving the grab bar from carnage 👍
Yee was 95 hot in cali today I'm I'm up in there after a good ride around the bay checking in.💯
Haha stay hydrated pete its rough out
Take a broken compression tester with ya and tell em that it ain't got good compression lmfao 🤟🤘🤟
Done that on accident a couple times
Make sure you check the chain before you ride especially on older ones ive have a few brake on test rides before. Get up in there🤟
Haha def a good idea classic
Buying used machines is like gambling!
Lmao yessir
What about the new FORD recall.CHAAAAAA
Lmfao
Buy a yamaha trimoto 175 frame. I wanted to swap a blaster motor in my brother's. Personally id take the whole rearend off the blaster and swap it onto trimoto aswell
That would downgrade a blaster im not a fan of the 175s ride. But def would want a bw200 front end on this and blaster rear end
@@TimeMachinesATVs thats why i was saying swap the whole rear. I can admit my brother's does bounce around more than fuck. Personally been ran over twice by the dumb things lol. But with rear suspension, a 6 speed trans, a hand clutch, and a nice little stance on the back. Feel like youd have one sick trimoto. Just look into it. I think it would be super cool and super simple since its air-cooled aswell
That guys a liar that shit probably wobbles just weld it up
Yeah its rough af at this point
2 days in a row🖖🖖
Another tomorrow!!
Where do I find the link to the compression tester? Good video guys, appreciate your advice on what to look for when buying.
Its at the bottom of video in description
3wheeler conversation would be sick would love to see that but ether route ya go yall wanna sell them front disk breaks?lol
Haha if i do the 3 wheeler i will
I might be interested in some of those parts. I have 3 frames to build in which my daughter will be racing. Possibly the entire motor if it passes compression and leak down tests. I’d have to see how my money situation is looking, but if you shoot me a price I’ll consider it.
We are going trike build on it tbh
@@TimeMachinesATVs that would be SICK. I’ve always wondered why the tri Moro 175 never got upgraded to a 200cc machine considering there was a 200cc class. I almost put a blaster motor in a 200X chassis I had but I traded the chassis instead
How many rolls of quarters does Blake use ... is he like a jukebox 🤔😲😂😂😂😂
I carry a couple rolls around just incase I gotta throw some hands
Lmfao oops
I want I want the crack frame might as well just stretch it out a little bit more my uncle Wandy made that hey my aunt Daryl
I'm sorry I fail it trying to sound like an ADHD kid that welded that up
Lmfao a transitional
here go on take a look there getcha a lil get ya get ya lol fav part lmao
Lol appreciate ya sb
Basically.. Basically just some bad ass dudes!
Appreciate it anthony
It's a transformer blaster lmao🤟🤘🤟
Fr finna fold up
Blaster atc, fuck ya id get up in that!
Appreciate ya dylan
well shit that frames boxed in and stronger than ever!
Lmao pretty solid messup
I was once buying a Yamaha breeze with a really tweaked frame. Was checking the quad out decided to stand it up and boom bitch was totaled!!! Noticed before I ever started it. I sourced another frame and ended up buying it. But guys look it over these sellers are hoes sometimes. This quad didn’t even run but I handled that. Had it about 4 months and sold it for profit. 🤘🏽😂😂
Haha nice deal. Still have extras laying in yard
Yes! Spoiling us with all the awesome uploads. Safety first! 14k subscribers by tomorrow!
Appreciate ya jonny!!
yo you guys have to make that blaster into a trike, that would be so crazy.
Would def be fun!
How much would you sale it for
I listed it yesterday and took it down after 120’replies and no one reading description. She is becoming a 3 wheeler
When I bought a quad earlier this year I stood it up on its back tires to check out the the frame because the 350 raptors frames are weak so that's the first thing I was checking and the guy was like no no hey it's leaking gas it's leaking gas so I said it back down I didn't think nothing about it but they won't even know gas coming out of it and then after I got it home I started up and wrote it up the road and there was no oil in it and thank God it's a Yamaha it survived but it leaked oil out the bottom of the stator case
Lol just cut fuel off she wont leak long
Look the hard work you put into your content bro!!!!! Get up in there!!!!
Appreciate it ibeastin more coming
Blaster trike for sure boys!!!
Would be awesome
Hey bro love your content I'm from Ontario Canada manitoulin island you have shown me a lot cool stuff
Appreciate ya Brent!!
hey... thanks for sharing
You bet brian
Hey I will buy that thing from you for parts
What kinda offer we talkin?
@@TimeMachinesATVs I’m talking to you on Facebook
Sunday Monday Tuesday Wednesday + 2stroke Thursday and the Sunday video. 6 videos in 7 days I’d say you boys are getting right up in there cha dudes. Appreciate ya
Appreciate ya shayne we gonna keepem coming. Share away brother
Jumping it or hit a tree to break that frame y’all could stretch it
Bof
Put some mullet weld on it lol
Lmao it needs it
Make the 3 wheeler out of it that'd be sick
Fr i am considering it
Bought a polaris scrambler 400... eww never again! What a pile
Lol id do it again
That’s my finest weld job right there. Lol 😂
Lmfao nice work
Helpful tips from the master to keep you from getting scammed and staying safe. Before I even consider going to see something, I look in the background of pics to see what kind of neighborhood I'm going to. If it's sketchy I won't go.
Haha def a good idea. I do the same
Tru that. I do the same. U can tell alot from backgrounds in a pic
I got a blaster they said great condition. When I went to see the case had a quarter size hole in it I figured chain broke . But it's been a great quad to have some fun on for little cash . Love the content guys keep it up you helped me a bunch working on mine. 2 stroke for life
Appreciate it hulk!! Another posting today
That's one you sell at night lmao 🤟🤘🤟
Lmfao he tried to get me
love that white 250r
Thanks dog it rips
First to like an watch
Thanks eyay getting up in there early bro!
Yfz hybrid be sick
Considering both
hey man i know your busy and stuff but im at a loss with this project, i was wondering if you get a chance at some point if you can point out the pulse line to the carburetor and where it comes from the case. excuse my ignorance XD im trying to learn
No clue tbh
@@TimeMachinesATVs so maybe after watching to many videos and looking at to many diagrams i got some small engine shit mixed up when trying to learn the difference in a 4 stroke carb and 2 stroke carb. a "pulse line" may only be on like chainsaws and shit i dont know either XD
Wow! I have never seen one cut like that
Clean cut/ busted lol
Never a bad idea to check the VIN. I live right between Baltimore and Philly so if you find a good deal on something nice and the owner doesn't have a title theres like a 70% chance its stolen lol
Always important
What do you use to check the vin.? Like website.?
Looks like they welded their skillsaw wrench in there. Haha.
Lmfao
Thanks for the tips! Also CONGRATS on the shop thats being built. Very exciting, you need the extra workspace for sure!!
You be blob and we appreciate ya ! Lots more to come cant wait for the space to worj
Thanx for the info, watch for them mullet salesman cha..
You bet
That’s a good view of that atc! Looking forward to bringing it home next month!
Yessir. I am as well lmfao
Good tips guys
No prob blick
Lol 😆🤣😂
Lmfao
Get up in here
Appreciate it grayson
This will be helpful since I’m gonna be picking up a blaster this month maybe
Look hard axan
@@TimeMachinesATVs yup already in contact with a guy
Good looking
Haha fo sho
You always make me laugh let me get my hands on that quadracer
Haha which one
Make sure the VIN isn't scratched off!
Yes def get a bill of sale with vin or title on all machines and confirm vin
Yes sir
Oh yeah
Did u miss all
that when u bought it??
No
Video explained that. He brought it was supposed to get 1350 i ended up buying it for 600
yes buddy yfzshee
Get a new frame change everything over.
Rather make it an 3 wheeler tbh
Jarrod, what size is the new shop your building?
30x50
Sweet
ltr250 on market place let me know
why message me here ? Message me on the listing if your serious
🤟🏻🔥🤟🏻
Make it a trike
Chea
Just take a Tri Moto 175 3 wheeler and take the blaster engine and put it in the three wheeler it is a exact bolt up
I got a frame you can have for it
I am considering a project on this
Yfshee 350
Yessir
Can u tell me some more tips cuse i gonna buy bashan 250 and can u tell me what u think abaut that atv