SLAMMING My LS400 on Maxpeedingrods Coilovers!

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 พ.ย. 2024
  • SLAMMING My LS400 on Maxpeedingrods Coilovers!
    10% off coupon code:nickj
    www.maxpeeding...
    Follow me on Instagram @nickjoenap

ความคิดเห็น • 24

  • @Nickjoenap
    @Nickjoenap  2 ปีที่แล้ว +1

    10% off coupon code:nickj
    www.maxpeedingrods.com/product/coilovers-strut-suspension-kit-for-lexus-ls400-xf10-1990-1994-adjustable-damper.html?tracking=nickj

  • @ClassicJunk88
    @ClassicJunk88 2 ปีที่แล้ว +4

    I did some off roading in my ls400 this weekend with my factory air shocks in high mode. I could put some coils on it to raise it and rally it up haha

    • @Nickjoenap
      @Nickjoenap  2 ปีที่แล้ว +2

      haha yeah i love taking mine on dirt roads. still rode like a cloud on factory shocks

  • @ezraleach6526
    @ezraleach6526 ปีที่แล้ว +2

    did u whve to adjust your pre load on the rear to get it that low? i dont want my car slammed but i cant even seem to get half decent fitment with the coilovers maxed out. in the fronts i maxed it out and it slammed it completely. idk what im doing wrong

    • @prodtrapalot1140
      @prodtrapalot1140 ปีที่แล้ว

      Back needs smaller springs like front

    • @ezraleach6526
      @ezraleach6526 ปีที่แล้ว

      @@prodtrapalot1140 max speeding rods sent me shorter sleeves so I should be able to go low now

  • @leifachu
    @leifachu ปีที่แล้ว

    I see you just have a 18in exhaust tip and moth mufflers removed i want to do the same to mine does it drone at all with the down tip?

  • @dizonwhizite2861
    @dizonwhizite2861 2 ปีที่แล้ว

    I have a ucf10 with Maxpeeding coilovers and had to get 2 extra front sleeves to use in rear coilovers in order to go low otherwise it doesn't even lower it 1"

    • @Nickjoenap
      @Nickjoenap  2 ปีที่แล้ว +1

      yeah i’ve seen people have that problem with ucf10s and i’ve also seen people swap the front and rear sleeves or cut them

    • @VI-Percent
      @VI-Percent 2 ปีที่แล้ว

      Bro I thought I was lowering it like an inch and when we dropped the jack it was like a 2inch raise😂, I had to max it out and there’s still a gap in the back, but the fronts I have to have like an inch higher than the lowest

  • @CheapBikeOwner
    @CheapBikeOwner 2 ปีที่แล้ว

    Dig the windshield sticker. Noticed it at the end 🤙🏻

  • @logangrilliotvlogs3538
    @logangrilliotvlogs3538 2 ปีที่แล้ว +1

    The real pimp mobile right here

  • @zillakami_mr.poopybutthole1424
    @zillakami_mr.poopybutthole1424 ปีที่แล้ว

    What size tires ?

  • @user-or7fv9dp8l
    @user-or7fv9dp8l 2 ปีที่แล้ว

    Ngl I had these and my passenger side coil blew on me yesterday, about to slam her on some god speeds and call it even

  • @hellstormer5826
    @hellstormer5826 2 ปีที่แล้ว

    does maxspeedingrods actually ride decent on an ls400?

    • @Nickjoenap
      @Nickjoenap  2 ปีที่แล้ว

      They’re too soft but other than that they weren’t too bad

  • @cigwetz7205
    @cigwetz7205 2 ปีที่แล้ว

    can someone clarify the ucf10-ucf20 years, i got a 95 and been told its both so im not sure now lol

    • @Nickjoenap
      @Nickjoenap  2 ปีที่แล้ว

      a 95 is a ucf20. if it has the slightly more rounded headlights like mine and it’s a 95 it’s a ucf20 the ucf10 is more square looking

  • @MW-dot
    @MW-dot 2 ปีที่แล้ว +1

    Order yourself some engine and trans spacers the oil pan hangs low on these

    • @Nickjoenap
      @Nickjoenap  2 ปีที่แล้ว

      i was thinking about it if i decide to cut stuff up and go even lower

  • @suedelile7307
    @suedelile7307 2 ปีที่แล้ว

    Tf do you have ford wheels on a Lexus for 🤦🏼‍♂️🤦🏼‍♂️🤦🏼‍♂️

    • @Nickjoenap
      @Nickjoenap  2 ปีที่แล้ว

      Drift/burnout spares

    • @suedelile7307
      @suedelile7307 2 ปีที่แล้ว

      I guess but the disrespect 😂 put that murica shit on these Japanese beauty’s