Honda Lawn Mower Replace Left Rear Wheel Support Part # 42940-VG3-B01
ฝัง
- เผยแพร่เมื่อ 26 ก.ค. 2015
- This video provides step-by-step repair instructions for replacing the left rear wheel support on a Honda lawn mower. The most common reason for replacing the wheel support is when it is damaged.
Buy part # 42940-VG3-B01 now: www.repairclinic.com/PartDeta...
Additional lawn mower repair, troubleshooting tips, help with finding your model number and part replacement videos can be found on our website:
www.repairclinic.com/RepairHel...
All of the information for this wheel support replacement video is applicable to the following brands:
Honda
Tools needed: 12mm socket, snap-ring pliers
You can find printable step-by-step instructions here: www.repairclinic.com/Repair-L...
Connect With Us!
plus.google.com/+repairclinic
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnnh3be
Check out our blog: www.DIY.RepairClinic.com
Don't forget to like and comment on this video, and subscribe to our channel! - แนวปฏิบัติและการใช้ชีวิต
![กินอาหาร ถูก vs แพง!! จานละ 500,000 vs จานละ 50!! [Ver. 2024]](http://i.ytimg.com/vi/FF_HppKg4vs/mqdefault.jpg)
Great video, only needed to replace the broken $2 bolt holding the wheel on but following the steps in your video worked perfectly. Had to buy $5 snap ring pliers so $7 repair. Thanks very much!
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
I couldn't move the rear wheel height adjustment on either side of my mower. After disassembly and cleaning the rear wheel support it works as easily as it must have when it was new. Thanks for putting this up. This video was so helpful to enabling me to make the repair.
Thanks for making this video, definitely helpful with keeping all your washers and spacers in the right place, for anyone else considering this repair make sure you're very careful with the ratchet key, (little piece sitting on top of the axle when you pull the gear off, very easy to lose).
This part is the replacement for the crappy -01 part that causes rear wheels to not roll backwards. Bushing was too small.
Thanks for making this video. It really saved me time and money.
Fantastic instructional videos!
I have a Honda HR215k1-SXA when replacing the left front wheel adjuster there is a cam nut. How do I know if I have it back in the right place ?
life saver Thank you. had the parts knew what to fix but got stuck on the clamps needed to get special pliers for them.
Simply Gaming wondering what brand this guys using in the vid... searched amazon but it all looks like chinese junk tools
Just enough information to help change my Toro left rear pivot arm. Thank you!
Cool thanks!
thanks very helpful
Sure wish you would mention that ratchet key during the disassembly; glad I watched he full video? BTW, found any disassembly instructions for the wheel assembly for a HRR2167VXA?
How about a video for the HRR2167VXA with the single rear wheel adjustment for both wheels (Lever, RR, NH164). Need to replace this broken lever!
Excellent video.
What size or part number of the smaller snap rings?
what is the part number for the wheel bolt? mine snapped in half
At the left wheel, the flat side of the gear should be face to the front, am I right?
Repair Clinic -- What about replacing the Right Rear Wheel Support on the same mower? Is it going to be different than this left side ??? Thank you for a very clearly documented with awesome camera work, video !! I also have the dreaded impossible to pull backwards wheels on an HRR2169VKA mower... Absolutely hate using it because it wont pull backwards..
@@repairclinic Thank you so much, Repair Clinic !!!
My right rear wheel is stuck, cannot remove it
Pl show used machines for repair.. not new 1.
Bijay Singh Negi Thank you for the feedback.
Thank you. I have a 4 piece set of German pliers. Mannheim or someting. Rubbish. Soft steel, bent, tips badly aligned, of different thicknesses! Tried to grind. Got one small check up out...then half an hour later a second one...What are your pliers please. Someone below recommended a set. They're $100 but have enough bad reviews to avoid them. Please tell us your pliers. Thank you.
@@repairclinic Thank you.
I am certain this will NOT work on a Honda HRT2162TDA. The bushing comes in from the back side, not by the wheel adjuster. My wheels are locking up when pulling it in reverse.
Did your mower USED to pull backwards ok, and then it got harder or what ??
You forgot to grease the damn thing before you installed it.
Please help. I spent hours doing this thanks to the snap rings and the lousy snap ring pliers I bought. I did all this and now the mower doesn’t click click click when rolling forward. What would cause this? I checked that the pinion gear matches the direction yours is.
I believe I fixed it. I bought new snap ring pliers and I apparently had the ratchet key in backwards with the curved part facing outward. Now it clicks.
I watched from a different video, the pinion gear (flat side) should face to the front. Try it!
Not as simple as this video makes it out to be.
It is a little tedious but I have done it many times now.. The trick is to get 2 pair of Channel Lock snap ring pliers, one large size and one small size, because there is a large snap ring behind the adjuster inside the mower, and then 2 small snap rings that need to be used on the axle that holds the wheel and the outer gear..
Just be sure that the little key that goes in the slot before you install the gear, goes curved side DOWN into that little slot that has the spring in it..
When you get it in and put the gear on it, you can carefully rotate the gear forward to see if will go forward, and then, you know that you have the gear orientation correct..
You want the wheels to make that clicking sound when you push the mower Forward only.. If that gear moves backward and clicks, then you need to turn it around so the opposite side is up, and assemble it, carefully turn it forward and it should click and you know its correct in orientation..