I got sphere rare earth magnet to spin (sitting on table not levitating) in center of vortex coil and I made a cylindrical coil and placed around spinning magnet - not counting power from the wall, the multimeter on cylindrical coil was more voltage than went in.
Nice, I took a look. I'll make up a cylindrical coil to try when the new Rodin design is ready. I have a feeling like a thicker conductor like a piece of copper pipe will also produce interesting results as a receiver alone if it's tuned to the coil using the Dolard/Tesla method of just using the same weight for the same material (=same resonant frequency)
Which one did you use? non-opposing CHIRAL(CHRIST) rodin coil or opposing ACHIRAL(ANTI CHRIST) rodin coil? See the TWISTOR field. That is what a CHIRAL rodin coil produces 😊
It would make sense to design the coil to be resonant on the frequency you wish to apply. It is likely your coil is resonany at a much much much higher frequency than 7 to 8 Hz. Have you looked at the inductance of your coil?
Hello, how are you? I would like to make a coil but I am not sure how the connection is, how many cables are necessary, 12 or 24, and if you can help me with that, I would appreciate it, a diagram or a video on how to connect and how to end up in a 2-pin connector. poles or 4
@DiannaGold it's meant to mimic the shape of a plasmoid where the magnetic field is tangled up so more of the energy is contained. Perhaps stronger magnetic field in the center than other coils but less radiating away
How can I get the frame to wrap my own coils or should I do 12 point star ship coil? I am trying to amplify a smaller light weight battery for my bike. Thank you for your time and thanks for sharing brother.
You'll find the stl files for our coil frames on the website (links in the description). I'm not sure how they could help you amplify your bike battery though sorry.
a speaker is the same right, just a coil of wire that makes a magnetic field that moves a paper cone with the windings on it, a and the rubber or foam surround applies a constant force to bring it back to place, isn’t this just a fancy winding with the mass being moved his hand and the magnet, and the spring tension his hand wanting to return to where it was? The only difference to me is in a speaker the windings go up and down and here they’re static and the magnet moves. I’m honestly asking I am not well versed in this subject
You would need to tune the capacitance to the coils inductance. Check out "how to tune an LC circuit" or "how to tune a Tesla coil" and use these same methods. Essentially, measure the inductance and resistance of your coil/circuit and then calculate the appropriate capacitor. Master Ivo (TH-cam channel) provides some valuable information on efficient component choices for circuits like this in his videos.
You should try this with a clear container of liquid mercury. Also you should probably be wearing rubber gloves when dealing with this radiation so closely. Grounding helps of course, but less radiation that penetrates the body, the better. It's likely the ozone making you feel head heavy, etc?
It’s basically just a speaker driver with zero mass I don’t get how it’s producing radiation let alone ozone, a speaker is the same right, just a coil of wire that makes a magnetic field that moves a paper cone with the windings on it, a and the rubber or foam surround applies a constant force to bring it back to place, isn’t this just a fancy winding with the mass being moved his hand and the magnet, and the spring tension his hand wanting to return to where it was? The only difference to me is in a speaker the windings go up and down and here they’re static and the magnet moves. How does that make ozone? Or radiation? I’m honestly asking I am not well versed in this subject
@@nikodemoka6585 The concentrated EMF at the center could in theory create patterns of wave interference that can split molecules, if the frequencies are tuned and the geometry is correctly balanced. Imagine the molecules receiving forces from all angles, receiving a push and pull force. If the phases are correctly balanced where the molecule exists, it could create enough of an imbalance in the molecule to pull it apart. I.e. if over time the field causes vibrations of the molecule at its resonant frequency, increasing the amplitude of vibration, the bonds could weaken. Normally this would only work in a scenario where you're using very precisely tuned frequencies and energy levels, but the difference here is that you have a large range of interference patterns happening at the center converging on multiple points within it depending on the tuning of the phases - which is a product of the geometry, the speed of light, the number of windings, the given frequency and so forth. Whether it actually produces ozone or not would require experimentation and validation due to the requirement of tuning the variables, however he claimed in the video that it did, so that's why I said that. As for producing radiation - if it is indeed creating ozone, that means it is producing ionizing radiation, which is harmful. It would be interesting to know for certain.
About 10 years ago I met a man, he told me he had "wrapped a coil of wire around a sphere, plugged it in, and a large light jumped up from it and blew up a wall in their lab. I did not know what ball lightning was at that time, don't think the man even used the term. But the absurdity of that story stayed with me for a decade until I saw an explanation
That's pretty hard to do man. I tried to do something much easier and I couldn't. The wire would be so painstaking to wrap with like hot glue on every single turn or 3.
Clear rubber mat fixed to the top of an open box with the device inside and under the mat. Maybe even make the mat a framed one and move the framed mat up and down. Just an idea
This is a cool video. The coil is obviously having an effect on the magnet. My question is, if the magnet was to be in a fixed position, unable to move, and the coil was also in a fixed position, would the effect be expressed on the frequency itself? I wish we could see the invisible stuff happening, human eyes are so frustrating.
It's ages ago I've followed Rodin coil stuff. Has anyone been able to build a coil that spins an axle stuck through it? Even if it needs high flanges to...flank the coil it would still be interesting.
Insulated from each other, but I've scrapped the interference design completely to be honest! It has some applications though. Sure generates a lot of back emf and supposedly ozone so it likely has some applications still (will check this myself if I ever get around to building my cheap ass arduino ozone detector). But I'm moving away from trying to capture back emf in power system designs now
Thanks. Yep, pretty much. When both channels inputs are set to the same frequency and you connect the outputs up to an oscilloscope probe you get a much lower amplitude output signal (cancellation effect). If one of the input frequencies is raised a few hz or tens of hz and the other left the same then the sine wave will begin to gain amplitude quickly and then begin to drop off again as you get further away from the peak resonant frequency. Same thing if you turn off the opposing channel input. The sine wave output from both the other live channel and the resonant channel will immediately gain significant amplitude as soon as one is turned off
@@AlchemicalScience From your experience with coils, can back EMF be used to make electrical power to supply energy on a small scale ?? Good day fella.
As I understand it, back EMF is the "excess" power from the collapsing fields of the coils. It can certainly be captured by adding a cap and diode in series with the primary and in parallel with the secondary. But I haven't succeeded in harvesting a meaningful amount of power from the output yet. I'll do a video soon showing my current circuit and relating it to field theory soon. Theoretically its just about how fast you can collapse and reform the fields (think HV MOSFET). That back emf is forced to go somewhere and do something when a new field is formed - just needs somewhere to go.
@@AlchemicalScience I cannot wait for you to do this Sir. I scored two spools of wire at a yard sale. The gauge is 29 and twenty pounds. This should be enough to experiment and test results. Shame I was not there earlier as the guy said he had twenty plus different size magnet wire on spools not even used with cover .over the wire. You know what I say, am happy to get two since now I have two. Price was killer too. Ten cents on the dollar. Do you know how to wind coils to totally enclose the magnetic field Sir ?? Am looking forward to see your new videos AS.
Nice one. My experiments are also limited by how much wire I can afford hah. Check out my video on Calculating Rodin Coil Toroid Geometry. The next video will be on printing and winding them. My wife Emma is releasing a design in a few days for coil frames that use VBM to very closely emulate the accurate toroidal magnetic field geometry with the wire archform. The calculations video explains how and why it's slightly offset from a 100% vbm accurate calculations to achieve a unifilar winding pattern. As far as I'm aware it's as far as anyone has got to accurately applying vortex based maths to coil design. Try a 1st and 3rd order nested coil design with the 2 coils wound with the same weight of wire (to get the same RF easily according to Tesla and Dollard, not accounting for circuitry (I have confirmed)).
I've tried actually, but it's too weak to see. Will keep experimenting though because it would be fascinating to see what's going on, especially with the later correct geometry coils we're making
Suggestion you should put the ball on pantiehose and watch its action.. or make a stand with thinly stretched pantiehose and drop the ball into the center.
I am Thoth of Atlantis the stable manifestation of the Jesus Christ my brother give your intent in live to God and become like I i can sense your awaking
Not calling you a liar, but your display of the effect on the magnet is suspect. The magnet is in your hand and your demonstration shows the magnet moving. A reasonable skeptic couldn't accept this because it's too easy to move the magnet with your hand and your hand with it.
I would suggest a reasonable skeptic checks out the other 20 or so videos of guys doing this experiment on TH-cam then - so he can see he is actually perhaps being a little unreasonably skeptical. This experiment is common knowledge to anyone who has played around Rodin Coils.
A comparison between the rodin torus and pendant style would be interesting :)
How can I order one of the kits??
Smart, with grounding bracelet. Interesting, please continue
What is a dielectric portal?
They're so beautiful man. So great.
What would happen if you have scalar field on each other to cancel eachother?
Would it make the field stronger or weaker?
Hey i build a vortex coil but it doesnt work. Can you help me i dont know if i connect it right 😕
I got sphere rare earth magnet to spin (sitting on table not levitating) in center of vortex coil and I made a cylindrical coil and placed around spinning magnet - not counting power from the wall, the multimeter on cylindrical coil was more voltage than went in.
Cool. I was going to try putting cylindrical coil in the power system as a receiver too.
@@AlchemicalScience I tweeted you a video.
Nice, I took a look. I'll make up a cylindrical coil to try when the new Rodin design is ready. I have a feeling like a thicker conductor like a piece of copper pipe will also produce interesting results as a receiver alone if it's tuned to the coil using the Dolard/Tesla method of just using the same weight for the same material (=same resonant frequency)
Only really matters if you can get more voltage AND current out, otherwise the power is less. Remember watts is based on voltage and current.
Which one did you use? non-opposing CHIRAL(CHRIST) rodin coil or opposing ACHIRAL(ANTI CHRIST) rodin coil?
See the TWISTOR field. That is what a CHIRAL rodin coil produces 😊
It would make sense to design the coil to be resonant on the frequency you wish to apply.
It is likely your coil is resonany at a much much much higher frequency than 7 to 8 Hz.
Have you looked at the inductance of your coil?
What would happen if you were to put a coil of wire in the middle? Could it induce a current through the wire?
Now Im wondering what kind of effect a trifilar rodin coil would have! Thank you for posting i appreciate it, this is awesome!
Hello, how are you? I would like to make a coil but I am not sure how the connection is, how many cables are necessary, 12 or 24, and if you can help me with that, I would appreciate it, a diagram or a video on how to connect and how to end up in a 2-pin connector. poles or 4
Ok, magnets move around when they're in the middle of the coil, how can energy be extracted from this? Im not understansing what the point is
@DiannaGold it's meant to mimic the shape of a plasmoid where the magnetic field is tangled up so more of the energy is contained. Perhaps stronger magnetic field in the center than other coils but less radiating away
How can I get the frame to wrap my own coils or should I do 12 point star ship coil? I am trying to amplify a smaller light weight battery for my bike. Thank you for your time and thanks for sharing brother.
You'll find the stl files for our coil frames on the website (links in the description). I'm not sure how they could help you amplify your bike battery though sorry.
a speaker is the same right, just a coil of wire that makes a magnetic field that moves a paper cone with the windings on it, a and the rubber or foam surround applies a constant force to bring it back to place, isn’t this just a fancy winding with the mass being moved his hand and the magnet, and the spring tension his hand wanting to return to where it was? The only difference to me is in a speaker the windings go up and down and here they’re static and the magnet moves. I’m honestly asking I am not well versed in this subject
What type of capacitor do up across output to get more gain on output?
You would need to tune the capacitance to the coils inductance. Check out "how to tune an LC circuit" or "how to tune a Tesla coil" and use these same methods. Essentially, measure the inductance and resistance of your coil/circuit and then calculate the appropriate capacitor. Master Ivo (TH-cam channel) provides some valuable information on efficient component choices for circuits like this in his videos.
Can you show us how to do the connections? I’m stuck there.. I can make main work
No problem - drive.google.com/file/d/12dS7jmd9W6_nKeKlJ4-JyyaLu5fcXwxJ/view?usp=drivesdk
You should try this with a clear container of liquid mercury. Also you should probably be wearing rubber gloves when dealing with this radiation so closely. Grounding helps of course, but less radiation that penetrates the body, the better. It's likely the ozone making you feel head heavy, etc?
It’s basically just a speaker driver with zero mass I don’t get how it’s producing radiation let alone ozone, a speaker is the same right, just a coil of wire that makes a magnetic field that moves a paper cone with the windings on it, a and the rubber or foam surround applies a constant force to bring it back to place, isn’t this just a fancy winding with the mass being moved his hand and the magnet, and the spring tension his hand wanting to return to where it was? The only difference to me is in a speaker the windings go up and down and here they’re static and the magnet moves. How does that make ozone? Or radiation? I’m honestly asking I am not well versed in this subject
@@nikodemoka6585 The concentrated EMF at the center could in theory create patterns of wave interference that can split molecules, if the frequencies are tuned and the geometry is correctly balanced. Imagine the molecules receiving forces from all angles, receiving a push and pull force. If the phases are correctly balanced where the molecule exists, it could create enough of an imbalance in the molecule to pull it apart. I.e. if over time the field causes vibrations of the molecule at its resonant frequency, increasing the amplitude of vibration, the bonds could weaken. Normally this would only work in a scenario where you're using very precisely tuned frequencies and energy levels, but the difference here is that you have a large range of interference patterns happening at the center converging on multiple points within it depending on the tuning of the phases - which is a product of the geometry, the speed of light, the number of windings, the given frequency and so forth.
Whether it actually produces ozone or not would require experimentation and validation due to the requirement of tuning the variables, however he claimed in the video that it did, so that's why I said that. As for producing radiation - if it is indeed creating ozone, that means it is producing ionizing radiation, which is harmful. It would be interesting to know for certain.
About 10 years ago I met a man, he told me he had "wrapped a coil of wire around a sphere, plugged it in, and a large light jumped up from it and blew up a wall in their lab.
I did not know what ball lightning was at that time, don't think the man even used the term. But the absurdity of that story stayed with me for a decade until I saw an explanation
That's pretty hard to do man. I tried to do something much easier and I couldn't. The wire would be so painstaking to wrap with like hot glue on every single turn or 3.
Clear rubber mat fixed to the top of an open box with the device inside and under the mat. Maybe even make the mat a framed one and move the framed mat up and down. Just an idea
❤❤❤ love this channel..Will be following 👍 intently.
🕊🙌🕊🙌🕊 Blanca
This is a cool video. The coil is obviously having an effect on the magnet. My question is, if the magnet was to be in a fixed position, unable to move, and the coil was also in a fixed position, would the effect be expressed on the frequency itself?
I wish we could see the invisible stuff happening, human eyes are so frustrating.
What would happen if you put a quartz rock in the centre?
Would be cool to see it react with a Container of iron powder or ferrofluid, or the magnetic field film.
It's ages ago I've followed Rodin coil stuff.
Has anyone been able to build a coil that spins an axle stuck through it? Even if it needs high flanges to...flank the coil it would still be interesting.
Are your opposing coils, on the interference coil, insulated from each other or touching? This may change the performance of the coil.
Insulated from each other, but I've scrapped the interference design completely to be honest! It has some applications though. Sure generates a lot of back emf and supposedly ozone so it likely has some applications still (will check this myself if I ever get around to building my cheap ass arduino ozone detector). But I'm moving away from trying to capture back emf in power system designs now
Why not put a steel or iron ring in the center when building the coil? That would drastically improve whatever magnetic fields are being produced.
Check out crop circle designs., Toroids, and many different types, and layered, connected/stacked toroids
I have other ideas for how to try to use these coils.
I been trying to figure how to actually harness the energy and collect the energy.
It seems easy if you look at. ..you could convert this type into mechanical work ...therfore eliminate carbon based sources
Can a coil be wound in both directions and totally eliminate the magnetic field when the wires are all connected ??? Nice work fella.
Thanks. Yep, pretty much. When both channels inputs are set to the same frequency and you connect the outputs up to an oscilloscope probe you get a much lower amplitude output signal (cancellation effect). If one of the input frequencies is raised a few hz or tens of hz and the other left the same then the sine wave will begin to gain amplitude quickly and then begin to drop off again as you get further away from the peak resonant frequency. Same thing if you turn off the opposing channel input. The sine wave output from both the other live channel and the resonant channel will immediately gain significant amplitude as soon as one is turned off
@@AlchemicalScience From your experience with coils, can back EMF be used to make electrical power to supply energy on a small scale ?? Good day fella.
As I understand it, back EMF is the "excess" power from the collapsing fields of the coils. It can certainly be captured by adding a cap and diode in series with the primary and in parallel with the secondary. But I haven't succeeded in harvesting a meaningful amount of power from the output yet. I'll do a video soon showing my current circuit and relating it to field theory soon. Theoretically its just about how fast you can collapse and reform the fields (think HV MOSFET). That back emf is forced to go somewhere and do something when a new field is formed - just needs somewhere to go.
@@AlchemicalScience I cannot wait for you to do this Sir. I scored two spools of wire at a yard sale. The gauge is 29 and twenty pounds. This should be enough to experiment and test results. Shame I was not there earlier as the guy said he had twenty plus different size magnet wire on spools not even used with cover .over the wire. You know what I say, am happy to get two since now I have two. Price was killer too. Ten cents on the dollar.
Do you know how to wind coils to totally enclose the magnetic field Sir ?? Am looking forward to see your new videos AS.
Nice one. My experiments are also limited by how much wire I can afford hah.
Check out my video on Calculating Rodin Coil Toroid Geometry. The next video will be on printing and winding them. My wife Emma is releasing a design in a few days for coil frames that use VBM to very closely emulate the accurate toroidal magnetic field geometry with the wire archform. The calculations video explains how and why it's slightly offset from a 100% vbm accurate calculations to achieve a unifilar winding pattern. As far as I'm aware it's as far as anyone has got to accurately applying vortex based maths to coil design. Try a 1st and 3rd order nested coil design with the 2 coils wound with the same weight of wire (to get the same RF easily according to Tesla and Dollard, not accounting for circuitry (I have confirmed)).
subbed. Is there a way I can contact you?
Are you on discord or anything?
Thanks. You can get me at alchemicalscientist@gmail.com
You should look at those windings through a ferro-cell😮
I've tried actually, but it's too weak to see. Will keep experimenting though because it would be fascinating to see what's going on, especially with the later correct geometry coils we're making
Error in Rodin coil Project. You view table for moltiplication tesla and realize this coil.
Suggestion you should put the ball on pantiehose and watch its action.. or make a stand with thinly stretched pantiehose and drop the ball into the center.
Последовательность намотки ре показал....поэтому пустое видео
I am Thoth of Atlantis the stable manifestation of the Jesus Christ my brother give your intent in live to God and become like I i can sense your awaking
Not calling you a liar, but your display of the effect on the magnet is suspect. The magnet is in your hand and your demonstration shows the magnet moving. A reasonable skeptic couldn't accept this because it's too easy to move the magnet with your hand and your hand with it.
I would suggest a reasonable skeptic checks out the other 20 or so videos of guys doing this experiment on TH-cam then - so he can see he is actually perhaps being a little unreasonably skeptical. This experiment is common knowledge to anyone who has played around Rodin Coils.
Apply repeated scientific method. You're on to something, gather plenty of data