ZIP TIES N BIAS PLIES 🤣😂 I love ya peg your a good ole boy I don’t think you’ll ever kill ol Slave lake she’s here for good and if she ever does go there will be a TH-cam funeral for the ol girl! Giver the ketchup and make Cosby proud
You could power that truck on a mix of used engine oil and David Hasselohoff's blood and drive it through an active volcano and it wouldn't even flinch.
Sounded like it dropped some valves which caused piston damage, this was the most common catastrophic failure I used to see on these old cummins motors usually due to over-revving on a downgrade they can't handle anything over 3,000 or the valves float. When the valves start floating and they hit the pistons and it knocks the keepers out...game over.
When I was in my early years in the auto industry, about 17 years ago, I had the pleasure of working on a 1997 F350 7.3L turbodiesel. On that day I had my first lesson in diesel mechanics as well as safety. The engine was a no start issue. My coworker turned the key, I proceeded to spray ether into the airbox. We were totally unaware of what we were doing (both of us inexperienced with diesel). The top of that motor blew up sending me to the floor and shrapnel all over the shop. I am fairly certain that's where my lack of hearing and fear of diesels came from. Haha. It's a memory I will never forget.
After the first few seconds of them spraying, I though “that would suckkk if they dropped a can in the pipe. I didn’t even see the can fall in, but then I saw him pull the pipe off (I thought for some reason the turbo failed) and saw the can and died laughing. 🤣
Great video! It would be cool to strip one of these engines down after it's been partially damaged by doing this, but before catastrophic failure. So we can see what it looks like when it's already limping on it's last legs, but not completely toast.
Guys comon i think we are smarter than this. I believe the damage is due to preignition due to fuel air beeing permixed. If you would inject through the injectors i think all would be fine. The ethers are after all a cleaner diesel alt fuel. I believe the same would happen if you sprayed diesel into the turbine.
I've some very strong 855 big cam engines. Had a boss who liked building them extra loose. Thing would smoke out a 10 acre field every morning of winter but after coming to temp the only smoke you'd see was fuel. No problems breaking the speed limits of VA highways with 83,000 lbs.
I love the old 855's, but that was hilarious. Even funnier! Beat that fender like a rented mule! Barely broke it,touch a mail box post or a gate post and they explode!!!
I've owned Cummins products primarily, and to watch this old big block die was kinda tough. My first semi had a Big Cam IV in it, and it was a good unit.
You can have one “runaway” on lpg with a mixer, I’m sure if you do it right you can even get an idle below redline, mine was just a hair above it before I shut the ignition off and it kept going
@@alt572 you probably have a paccar and when it breaks it costs 10k just to diagnose it lmao. These engines are king. Truck drivers today are the biggest losers. Slaving away for a 180k truck only to last 5 years
Yea two people dying in your sick fantasy because you're upset that he's blowing up an old wore out Cummins. It's his fucking time and money get over it douchebag.
The thing is, you don't often see anyone blowing up these big diesels properly. I'm saying I like this; and what's wrong with doing just one or two of each kind if they are plentiful? It's really something to see any diesel eat one piston at a time (or whatever) until they're gone.
Thanks for the MINTY entertainment. Better than TV. You put the "FUN" in FUNeral. hahaha. I bet that was chunks of piston going out the exhaust pipe. Hope to see the teardown vidya one day.
Keep the exhaust connected so the smoke doesn’t cover the action at the engine block I’m waiting to see a window open in the side of one of the engine blocks
Somebody's got to keep making crap to send to china so they can recycle it. Then send us new crap back in the form of toasters and other stuff they make cheap.
The next person to complain about "should have saved a good core" and you're so concerned about its welfare. How about the ol' banger gets delivered to your house, dropped on your steps and you can save it. Then you can go stand on the street and shout "i saved the core".......that nobody gives 2 fks about.
The avg person with a cdl, or diesel interest only can afford to worry about modern engines because that is the only thing most banks finance. It's sad.
You should pull the turbo oil supply line off and put it in the inlet of the turbo for the next one you destroy! Or rig up some sort of external oil feeding so it doesn't lock up from lack of oil in the crankcase. I've always wanted to see one run away on oil.
@Warren what's your email I'll gladly pay you 1500-2000 cash money for that 4bt, I'm halfway done swapping one into my 01 tacoma and on first start up i heard a god awful knocking racket it it dropped one cylinder now it needs a rebuild.
This guy does something that sounds like real fun to watch and he don't film it for youtube and share a link with us, Come on man whats wrong with you L.O.L. It sounds to me like the Briggs and scrap iron got what it deserved though !
@@billsmith8238 Ok that sounds interesting in one way, but more like a suicide attempt in some others if you are still in the boat, I'm hoping that's not part of the plan ! a friend of my parents, husband choose to remove himself from life last weekend sadly. It kinda sucks she never knew there was a problem that bad until then.
I want to say that a 60 series Detroit is being bought for like 8 grand and up un restored and 12v71 are very rare engines. Where just the pistons if you were to part it out you could probably buy that truck 5x over.
I am looking forward to the tear-down video! Thanks for sharing. Oh also I disliked and unsubscribed like you said, but then I had to like it and resub because your content is quite entertaining!
"Elimination of the competition" That's what this video should be named. Also where are all the haters? I'd figure there world be a lot more since I'd say the 855s are more legendary engines than the 8v71s. By this time with the 8v71 destruction video, there were 2000 angry commenters and 60% more dislikes than likers. Funny how that all works. Anyway, great video!
Haha, dangerous! Engine was far away. I like the intake setup. If that rig would have hung a valve and back fired you guys would loose eyebrows at the least.
Having watched the video, i need to see the teardown now because I'm calling a "no-blow". I've a feeling all that happened was you bent/burned some valves although the final clunk may have been a piston, but to be different, i call it as you only bent some valves and cremated the turbo. ;) Oh, and have you seen NEUTRAL DROP's channel? they do some pretty entertaining content too, as well as ol' Peg. Peace out man
Well that was a special type of fun that my wife would never get... I was a student in the Diesel program at Santa Rosa Jr College and my instructor gave me the thumbs up on fabricating a heat exchanger using the waste heat off the exhaust stack. The purpose of the heat exchanger was to thin up the viscosity of used veggie oil and let the Cat motor suck it back up as fuel. We had attached a water brake to measure horse power difference between veggie oil vs real diesel. Anyways half way into the semester some of the piston had enough of this BS and went on strike. They melted and exploded like a volcano. No one got hurt but it was truly amazing when the exhaust started pouring orange sparks all over the shop floor.
Love to see you try and blow up an IVECO engine. We have one in a FIAT loader and the damn thing doesn't stop. Weve ran it out of oil till it wouldn't turn over added oil and it fired right up. We had it sitting for five years till the vines took it over and I told a buddy of mine it would fire right up on the shitty diesel still in it. That it did but it took off wfo because the pedal was rusted to the floor.. great videos. Love to see you kill one of the IVECO 's
i learn a lot from your teardown vids but I also enjoy destruction vids. What was the jingling sound from the engine while you guys were trying to put the pvc pipe on?
I would of possibly paid for that engine, emailed you 200 times asking questions and negotiating on the price to then end up wasting all your time by not purchasing it. It would be perfect to sit next to the rest of the shit in my yard the town is threatening me to remove.
I can imagine the conversation between them: Hey Billy boy I just found me three dozen cans of ether what do you wanna do? Well I got me an old truck and it's crap because I ain't know how to drive that son of a gun right then there Hey I know let's take some of that there ether and spray it on the engine and see if it dies.
Love this guy. This is what I was hoping Chris fix would turn into but he went cop rate and played to the weekend warriors and not the real Og’s getting down and dirty Monday through Friday
![[TH]FFWS SEA Spring 2024 Final](http://i.ytimg.com/vi/TK2mu-8yBFU/mqdefault.jpg)
16 cans? Please, that's an appetizer fur ol slave lake!
ZIP TIES N BIAS PLIES 🤣😂 I love ya peg your a good ole boy I don’t think you’ll ever kill ol Slave lake she’s here for good and if she ever does go there will be a TH-cam funeral for the ol girl! Giver the ketchup and make Cosby proud
You could power that truck on a mix of used engine oil and David Hasselohoff's blood and drive it through an active volcano and it wouldn't even flinch.
That old hoar loves it!
I was waiting for ya to show up 🤣😂
Break out the radioactive horse piss!
Somewhere there is a one legged Canuck screaming; "Give her the Kethcup!", and "MINT!"
Only zip ties and bias plies !
Lmaooo
Miiiiiiiiiint
Peg and deboss just did a calab deboss garage seems decent watched a few of his yesterday.
That would be the comment right above you lol
I'd say you should blow up a 6.4L Powerstroke next... but they already do that themselves.
I was gonna say...just day to day driving for about 75k miles will do that
They self dismantle. It's a feature.
bigghoss762 “it’s a feature not a fault!” -me as an engineer
Lol. Mines creepin up on 200k, 7500 hours on the plant, runs just fine. Probly all the non IH race parts.
Way too easy. Almost as easy as a 6.0 Powerstroke
Oh my fuck! ITS BEAUTIFUL!!!
NO CURSInG DANGIT
ZIP TIES N BIAS PLIES It's glorious 👌🤟
Glad to see you here
This comment is underrated as fuck, and I’m sad that you censor your videos now :(
Was going to mention you zip ties 😂 knew this would be up your street 👍🏻
Sounded like it dropped some valves which caused piston damage, this was the most common catastrophic failure I used to see on these old cummins motors usually due to over-revving on a downgrade they can't handle anything over 3,000 or the valves float. When the valves start floating and they hit the pistons and it knocks the keepers out...game over.
wow the more you know :D ya learn something everyday
You were absolutely right! There was a follow up video to this one where he tears down these engines, and that is exactly what happened
She liked that Cosby in a can
"Ohhhhh yeah she _loves that shit"_
Haha
Canned consent
@@Loxrir You guys...
24:30:50
"I didn't know it would kill a diesel."
"I didn't ether"
I didn't ether, but these guys did.
I like how the video just, starts. Lol. No long build up. Thanks for that.
When I was in my early years in the auto industry, about 17 years ago, I had the pleasure of working on a 1997 F350 7.3L turbodiesel. On that day I had my first lesson in diesel mechanics as well as safety. The engine was a no start issue. My coworker turned the key, I proceeded to spray ether into the airbox. We were totally unaware of what we were doing (both of us inexperienced with diesel). The top of that motor blew up sending me to the floor and shrapnel all over the shop. I am fairly certain that's where my lack of hearing and fear of diesels came from. Haha. It's a memory I will never forget.
Its just 😥 to kill that old gal
never though it could be dangerous. good to know. i only work on gas engines though.
Why is either no good for diesel?
@@rizdalegend kills the rings leading to loss of compression over time
@@rizdalegend diesel not as flammable I'm guessing. Diesel burns slow, either goes boom
After the first few seconds of them spraying, I though “that would suckkk if they dropped a can in the pipe. I didn’t even see the can fall in, but then I saw him pull the pipe off (I thought for some reason the turbo failed) and saw the can and died laughing. 🤣
I think it happens at 2:23, off camera, because you can see the pipe shake and go down a bit 🤣🤣🤣🤣
Not gonna lie, if I'd had a project for that engine, I might be upset. But I don't, so I'm not. Can't wait to see the tear down.
Had a driver spraying into the dust bowl to get an engine started. It basically kept breathing ether after start till the piston crowns melted.
Its his truck though. His choice.
@@tylersowa3337 Sure. But we don't have to agree with it.
what are you going to do with the other 16 cans of consent?
I hope he breaths them all in in rapid succssion
Sell it to Bill Cosby.
@@mwnciboo 🤣🤣
@facemellter Ether Play ? :) Now that's a Fetish !!!
Now sue the makers of the starting fluid for putting "safe for all gasoline and diesel engines"
Gotta respect the makers of that engine. It's like a soldier who gets hit with many rounds, and keeps on charging the enemy.
Like Boromir
Great video! It would be cool to strip one of these engines down after it's been partially damaged by doing this, but before catastrophic failure. So we can see what it looks like when it's already limping on it's last legs, but not completely toast.
*ozone has left the chat*
Diesel actually releases little to no carbon so it doesn't hurt the ozone not nearly as much as gasoline it can cause smog though
@@zachsteele6964 "little to no carbon" hahaha how fucking stupid do you have to be to say that. Have you taken a single chemistry class?
Guys comon i think we are smarter than this. I believe the damage is due to preignition due to fuel air beeing permixed. If you would inject through the injectors i think all would be fine. The ethers are after all a cleaner diesel alt fuel. I believe the same would happen if you sprayed diesel into the turbine.
@@shnek5143 cry more
@@shnek5143 It's a scientific fact diesel is cleaner than gas
Tougher than the new engines I’m sure.
Amen to that Ken
This is how Cummins should test their new engines
I was waiting for the pipe to turn into a cannon and blow the guys off the truck lol
Honestly
Now that would be worth watching.
I've some very strong 855 big cam engines. Had a boss who liked building them extra loose. Thing would smoke out a 10 acre field every morning of winter but after coming to temp the only smoke you'd see was fuel. No problems breaking the speed limits of VA highways with 83,000 lbs.
Craigslist: Had it running last week. Needs work. Make an offer $$$
No lowballers I know what I have lol
Or Great truck pulls a little bit to the left and has a slight tap in the engine, might just need a valve adjustment or 2.
One owner, Low mileage.
Take it to a engine rebuild shop and be like, “well dam she was running just fine,” then record what his reaction is when engine is torn down lol
I love the old 855's, but that was hilarious.
Even funnier! Beat that fender like a rented mule! Barely broke it,touch a mail box post or a gate post and they explode!!!
big cam engines have a place in my heart.
zip ties and bias plys brought me here
Buck Thrusthorn same good Chanel
GO POKES
George Case same here... go pokes! Wyoming for life!
This is awesome! What great way to put it down. Can't wait to see whats next!
I've owned Cummins products primarily, and to watch this old big block die was kinda tough. My first semi had a Big Cam IV in it, and it was a good unit.
Good send-off for the old girl. I hear that propane gets pretty exciting too lol!!
@billn' Lori, acetylene works good also. You just gotta dig a bomb shelter about half a mile away. Lol
You can have one “runaway” on lpg with a mixer, I’m sure if you do it right you can even get an idle below redline, mine was just a hair above it before I shut the ignition off and it kept going
Or shove a handful of tannerite in the intake If you hate yourself
Are you trying to die?
10/10 video no long intro explaining what I already knew was going to happen from the title just right to it. Liked and subbed
I'm impressed by the Cummins' performance and by the ingenuity used to destroy it, but like, don't you guys have anything better to do?
No, just destroying vintage diesels I guess 🤷🏻♂️
@@4_Low_Off_Road Vintage makes it sound like it's an antique that's worth something. It's an old junkyard engine
These engine s suck everyone has one a real man owner has. A cat engine. I do. 3116
@@mattmonteith2175 lol cat engines are junk and cost at least double to rebuild than a cummins. C15 was good but besides that rest are junk.
@@alt572 you probably have a paccar and when it breaks it costs 10k just to diagnose it lmao. These engines are king. Truck drivers today are the biggest losers. Slaving away for a 180k truck only to last 5 years
Just goes to show how tough these motors are
I'd laugh if that poor Cummins blew up and the crankshaft took both thier heads clean off!
Yea two people dying in your sick fantasy because you're upset that he's blowing up an old wore out Cummins. It's his fucking time and money get over it douchebag.
ya that would be cool there are fucktards for sure
Dwl ...your comment have me laughing for hours...
16 cans of ether have killed the 16-litre Cummins Diesel engine!!
darold zink Their*
Just a couple of good ole boys having some fun, love your channel.
The thing is, you don't often see anyone blowing up these big diesels properly. I'm saying I like this; and what's wrong with doing just one or two of each kind if they are plentiful? It's really something to see any diesel eat one piston at a time (or whatever) until they're gone.
Can't wait for the tear down videos! It would be cool to see the carnage!
Why would you want to destroy a perfectly good diesel engine? A Cummins at that! Hilljacks, for sure.
Totally agree, what a waste
Probably already fucked
@@zodiotekgaming If wasn't before, it certainly is now.
Because he has a TH-cam channel, and you dont...
Because who the fuck cares lol
Are we having fun yet?
🤣👍👌 like the can that got sucked up the tube! Very entertaining
I am a Cummins guy but this was awesome to see . she gave a good fight
3:28 "I did not mean for that to happen"
Me: ???
3:45:
Me: Dies laughing.
Same😂
laughed my ass off when I saw that can come out of the hose!
Thanks! I needed to see some stuff blow up tonight.
LMFAO, when she finally stalled it sounded like a kitchen timer bell 💀🤣
What did the compressor wheel look like after chewing on a spray can?
Thanks for the MINTY entertainment. Better than TV. You put the "FUN" in FUNeral. hahaha. I bet that was chunks of piston going out the exhaust pipe. Hope to see the teardown vidya one day.
Keep the exhaust connected so the smoke doesn’t cover the action at the engine block
I’m waiting to see a window open in the side of one of the engine blocks
But why? I never understand wasting good cores
Somebody's got to keep making crap to send to china so they can recycle it. Then send us new crap back in the form of toasters and other stuff they make cheap.
@Landon Schad did you survive abortion?
Americans, that's why. There's a reason they're worldwide laughing stock
@@Sbanar that's the nice thing about being American, we are free to do what we want with our own property.
@@LS__812 Oh Great That's good to know Ill just use the 15 or so US Flags I own as shitpaper then
The next person to complain about "should have saved a good core" and you're so concerned about its welfare. How about the ol' banger gets delivered to your house, dropped on your steps and you can save it. Then you can go stand on the street and shout "i saved the core".......that nobody gives 2 fks about.
True. I've cut up trucks way nicer than that for scrap when I worked in the salvage yard.
I know I vote Democrat trying save old trucks.....
Dynamo Joe exactly! It’s just old junk that no one wanted to save. It probably sat around forever for sale before this
The avg person with a cdl, or diesel interest only can afford to worry about modern engines because that is the only thing most banks finance. It's sad.
@@brandoncherry1651 Yer offended by my comment? That's your reaction? "suck a turd" What grade are you in anyway? Six?
NICE 👍
live the ford 9000 and the international. haven’t driven either in at least 25 years. love those old dogs.
can’t wait for the rebuild
love the videos and the detailed tear downs
I look forward to the Cat engine build.
You should pull the turbo oil supply line off and put it in the inlet of the turbo for the next one you destroy! Or rig up some sort of external oil feeding so it doesn't lock up from lack of oil in the crankcase. I've always wanted to see one run away on oil.
I have an obsession with fixing old iron and this is great
Buying that much ether definitely got you reported to the authorities for meth production 😂. I bet they watched you for at least a week.
I don't understand why people find it fun to destroy old diesel engines. I'm not hating on your video I simply just don't find this fun.
How much would you want for the 4bt that you have.
@Warren what's your email I'll gladly pay you 1500-2000 cash money for that 4bt, I'm halfway done swapping one into my 01 tacoma and on first start up i heard a god awful knocking racket it it dropped one cylinder now it needs a rebuild.
@Warren thank you so much
I must have Alzheimer’s, because I don’t remember anyone asking!
I'm hating,I think its absolutely stupid and ridiculous to destroy a good engine
I shot a 5 HP brigs & Stratton running at 3600 rpm with a 3006 it's very satisfying for some reason
Tom Lee tell me more
@@ChrisCookAuto frustration reduction by destruction
This guy does something that sounds like real fun to watch and he don't film it for youtube and share a link with us, Come on man whats wrong with you L.O.L. It sounds to me like the Briggs and scrap iron got what it deserved though !
@@super6954 maybe I will, have been thinking about crashing old boat into a rock seawall
@@billsmith8238 Ok that sounds interesting in one way, but more like a suicide attempt in some others if you are still in the boat, I'm hoping that's not part of the plan ! a friend of my parents, husband choose to remove himself from life last weekend sadly. It kinda sucks she never knew there was a problem that bad until then.
Looks like a bunch of fish cleaners having fun on a Saturday afternoon.
I'm impressed with the persistence. Lol nice.
You can see just how much air that giant mechanical fan is moving -exhaust smoke gets sucked right in. Cool!
Redneck EGR
Would love to know the before and after rpms
I'd love to have these good ole boys as my neighbor! Never a dull moment!
love it thx for the video keep posting great content bud
whats the purpose of destoying that once perfectly good motor?
It's fun
He likes cat it's in his name
He is a stupid idiot
More money than brains
Once good motor
Why would you destroy an engine?
Peter G. Because it’s old and worthless to 99% of people, it was probably doomed to the crusher anyways, so have some fun first and make a video
Like your tool-kit laying on the ground in front.
Congratulations you stuffed it up , real heros
WHY ???
man you sure makee me jealous if only i had one of those trucks my life would be complete
What, a frame bent cracked to shit pos? ;)
I want to say that a 60 series Detroit is being bought for like 8 grand and up un restored and 12v71 are very rare engines. Where just the pistons if you were to part it out you could probably buy that truck 5x over.
I am looking forward to the tear-down video! Thanks for sharing. Oh also I disliked and unsubscribed like you said, but then I had to like it and resub because your content is quite entertaining!
"Elimination of the competition" That's what this video should be named.
Also where are all the haters? I'd figure there world be a lot more since I'd say the 855s are more legendary engines than the 8v71s.
By this time with the 8v71 destruction video, there were 2000 angry commenters and 60% more dislikes than likers. Funny how that all works.
Anyway, great video!
I think AgentJayZ calls those pops "compressor stall" :-) Can't wait to see what died. Perfect way to end the weekend thanks!
I get so much joy from reading your comments lol you get people so butthurt I love it!! Keep up the great videos, builds and blow ups alike!
This is the kind of silliness I expect when I watch a garage-54 video
Haha, dangerous! Engine was far away. I like the intake setup. If that rig would have hung a valve and back fired you guys would loose eyebrows at the least.
It’s been run at full throttle for to long that’s what’s wasting this wonderful Engine
Hey ,that's no way to treat a loyal hardworking diesel engine
You guys are dedicated. Fucking mint I tell ya...Complete delivery on content!
That was every bit as entertaining as watching beaver dams being dug out... RIP Cummins...
I'd love to see another go at this, but completely changing the diesel for liquid ether through the original pump. :)
I don't think that would work for a mechanical pump due to ether being a solvent instead of a lubricant like Diesel
@@sweetsmidgybro7900 Well... if you're still going to kill the engine, I can't see why not. 😆
@@89RASMUS thats Tru 😂
the amount that got wasted from you sprayin it down the tube is wild lol
New sub here, lube tube actually recommended your channel. Probably because I watch Peg's crazy ass channel. Keep up the minty vids!
Damn I wish I had that much starting fluid around my farm lol
Ya can never find it when you need it
Having watched the video, i need to see the teardown now because I'm calling a "no-blow". I've a feeling all that happened was you bent/burned some valves although the final clunk may have been a piston, but to be different, i call it as you only bent some valves and cremated the turbo. ;) Oh, and have you seen NEUTRAL DROP's channel? they do some pretty entertaining content too, as well as ol' Peg. Peace out man
Hey man I subscribed to your channel after zipties mentioned you in a few vidjayos and because you're blowing shit up! Awesome thank you!
Well that was a special type of fun that my wife would never get... I was a student in the Diesel program at Santa Rosa Jr College and my instructor gave me the thumbs up on fabricating a heat exchanger using the waste heat off the exhaust stack. The purpose of the heat exchanger was to thin up the viscosity of used veggie oil and let the Cat motor suck it back up as fuel. We had attached a water brake to measure horse power difference between veggie oil vs real diesel. Anyways half way into the semester some of the piston had enough of this BS and went on strike. They melted and exploded like a volcano. No one got hurt but it was truly amazing when the exhaust started pouring orange sparks all over the shop floor.
Bet it lasted longer than one of your cat builds would.
Hell no
The man does fine work and takes the time to explain things clearly and unlike you; the rest of us appreciate that.
Love to see you try and blow up an IVECO engine. We have one in a FIAT loader and the damn thing doesn't stop. Weve ran it out of oil till it wouldn't turn over added oil and it fired right up. We had it sitting for five years till the vines took it over and I told a buddy of mine it would fire right up on the shitty diesel still in it. That it did but it took off wfo because the pedal was rusted to the floor.. great videos. Love to see you kill one of the IVECO 's
All I can say is that is amazing.
Big fella said keep feeding me like Zeke Elliott 😭😭
@ZIPTIESNBIASPLIES
Ole bill Cosby in a can bud fuckin! Mint👌
Minty!
do you realize what that was worth before you did that
cabotbluegill About $1.50
About 1000$
I, for one, wholly approve of this content.
I haven't seen any updates on your channel lately, are you still around? I had a question about an MSX.
I feel like your tag line at the end of every vidya should be “be sure to dislike and unsubscribe” like you’ve said in previous vidyas.
i learn a lot from your teardown vids but I also enjoy destruction vids. What was the jingling sound from the engine while you guys were trying to put the pvc pipe on?
I would of possibly paid for that engine, emailed you 200 times asking questions and negotiating on the price to then end up wasting all your time by not purchasing it. It would be perfect to sit next to the rest of the shit in my yard the town is threatening me to remove.
That motor said the hell with the fluid. Give me the whole can. LOL
Guy with to much money
I can imagine the conversation between them:
Hey Billy boy I just found me three dozen cans of ether what do you wanna do?
Well I got me an old truck and it's crap because I ain't know how to drive that son of a gun right then there
Hey I know let's take some of that there ether and spray it on the engine and see if it dies.
Love this guy. This is what I was hoping Chris fix would turn into but he went cop rate and played to the weekend warriors and not the real Og’s getting down and dirty Monday through Friday
What's your opinion of the 3406b 4mg model engine ?
Why didn't you use propane? one could get a lot more bang for the buck.