Thanks for the heads up CP. Just ordered the the HLS 300 both in straight and bent. $68.16 shipped to my door with sales tax. Think it’ll be a nice addition to my Knipex and Snap on’s
I had to crush my arm to get a bolt started on some poorly designed thing a few months ago. Using long pliers didn’t quite have enough clearance. This would have been so nice to have in that scenario . Like you said, it can also get small hoses off or grab and turn something non magnetic in a tight spot like a connector. I have one on order now thanks CP.
Thanks CP for another great video and introduction to a brand I was completely unfamiliar with. And I agree, ChrisCas's channel is great. The only caveat I see with these is because of their length, they might be awkward to use with those thinner dipped handles. I am still am interested in trying these, but can try and modify them with a thicker soft grip for better control. But I'll see once I get them; might be great as is! Thanks again brother. 👍
I have that set of Igarshi needle nose and bent needle nose, the bent ones work well on hose clamps! And the IPS and Tsnodu plier are cheaper than Harbor Freight and the quality is awesome! I got my pliers off Amazon shipped from amazon. I emailed you the link!
That was a really cool video I’m glad you are doing a lot of the more unique stuff from Japan and Germany I have a feeling that would work really good on marine craft for some of the tight angles you would have to do with hoses keep up the good work CPA I’d love to know more about distribution of this stuff that you’re Sherwin and the backstory with
Good Evening Fellow Toolhaulics and Friends: CP, what a nice video on those ISP PLIERS. They both look like they have a lot of potential !!!!!! I know you like those JDTCO flush cut pliers & so do I. The Godfather IMHO did a great job with these cutters. They cut clean & no sharp hanging razor type edges that causes us to bleed all over the place. CP, thank you for a another great topic/ the ISP pliers. Thank you & my best to you & Henry. TMP from N.J. 😊😊😊
As a bit of an old timer and tool addict myself, I've been collecting some of the classic brand sets as they come up complete and in nice condition. But I've also discovered Koken and other excellent Japanese tools. It seems they have something in them that makes them addictive!! Just about everyone on the tube and in real life who tries them gets hooked. Maybe they need a warning on the packaging!!
Awesome Long slip joint needle nose pliers 👍👍 I got to find some !! The only thing is Japanese tools don’t have warranty. But than again it’s great quality
@CPthetooladdict I had some old beat up pair from my childhood, dunno how they ended up in the tool box, I later on cleaned them up and was able to get the part number PL-726 and ordered a new pair on Amazon. They are what you said like a hot knife.
@@CPthetooladdict what is really funny. I’m a career mechanic. I’m just now getting my ASE certs. But I have worked in shops for ten years. I use a U.S. general 2 bay as my box, I use my Mac cart single drawer with lid as my roll cart. I use icon sockets and icon wrenches since they have been out. I have traded in one set of sockets just because. I did have their torx bits but they twist super easy. They are now my knock arounds/ stripped one size up lol. The professional no slip and ratchet wrenches are great. Sockets are great and I do have a ratchet for a f around. I gotta say they have held up. On the other hand I have Matco and Mac. Love my 1/2 3ft axis ratchet aka encouragement and my long Matco 3/8 aka persuasion. I think it’s a lot to do with know tool limits too.
You can clearly see the pride in workmanship is second to none on those pliers? The jaws are hand ground to perfection, unlike the Tawainese one's usually are? The jaws are trued by had, no slop in sight? You don't always have to have a mirror finish or black phosphate coating on the steel? I'd buy them if I were needing a plier of that style, for sure? Good job, CP. It's nice to share all the choices we have in tools, Snap On is not always the best at everything tool related? They have their place in specialty tools, that not many can touch, but there are certainly other options out there?
@@CPthetooladdict I believe they are, I will get part # tomorrow they are at work. Maybe I'll make a video and tag you in it if I can figure out how to do it
The link is in the description. The bent nose is now available on Amazon, just a fyi.
More Japanese tools. I love my Snap Ons and Mac Tools, but my heart will always have a special place for Japanese tools
Thanks for the heads up CP.
Just ordered the the HLS 300 both in straight and bent. $68.16 shipped to my door with sales tax.
Think it’ll be a nice addition to my Knipex and Snap on’s
I bought some side cutters from a Japanese company named Byxas and they are awesome
Ive had the straight pair for about a year now and they're absolute money!
Dam came across one of your videos now I’m watching you everyday and spending a ton of money on new tools lol. Thanks for the great content
Glad you like them!
Awesome pliers. Thanks for sharing. Keep the content coming. Hope you have an incredible night. Much love and RESPECT.
Thanks! You too!
Thank you for introducing every time!
I appreciate your quality. I would love to showcase more of your pliers anytime!
I’ll have to look those up
I had to crush my arm to get a bolt started on some poorly designed thing a few months ago. Using long pliers didn’t quite have enough clearance. This would have been so nice to have in that scenario . Like you said, it can also get small hoses off or grab and turn something non magnetic in a tight spot like a connector. I have one on order now thanks CP.
Thanks CP for another great video and introduction to a brand I was completely unfamiliar with. And I agree, ChrisCas's channel is great. The only caveat I see with these is because of their length, they might be awkward to use with those thinner dipped handles. I am still am interested in trying these, but can try and modify them with a thicker soft grip for better control. But I'll see once I get them; might be great as is! Thanks again brother. 👍
Finally, the plier video I've been waiting for.
Find it interesting that they did a combination of polish and satin finish. Great looking set of pliers! 🐺🔧
My thoughts exactly
I have that set of Igarshi needle nose and bent needle nose, the bent ones work well on hose clamps! And the IPS and Tsnodu plier are cheaper than Harbor Freight and the quality is awesome! I got my pliers off Amazon shipped from amazon. I emailed you the link!
Thanks for the tips!
Pro America 5050 pliers are another slip joint long needle nose version
Nice looking pliers. I kind of prefer the satin finish over chrome and they have red handles.
Same here!
Awesome! Way to go and turn up some diamonds from the far corners of the internet.
Wow, thanks!
Im over in the UK, tried looking for them on Ebay.
Any clues???
Ebay is where I got mine
I have a couple pair of those pliers and they are great like you straight and bent tips
Those trip my trigger...very nice looking.. Thanks Buddy..👍
Any time!
That was a really cool video I’m glad you are doing a lot of the more unique stuff from Japan and Germany I have a feeling that would work really good on marine craft for some of the tight angles you would have to do with hoses keep up the good work CPA I’d love to know more about distribution of this stuff that you’re Sherwin and the backstory with
Glad you enjoyed it!
I typed in the name ips pliers on ebay plenty available
Takes a month to get them
Good Evening Fellow Toolhaulics and Friends: CP, what a nice video on those ISP PLIERS. They both look like they have a lot of potential !!!!!! I know you like those JDTCO flush cut pliers & so do I. The Godfather IMHO did a great job with these cutters. They cut clean & no sharp hanging razor type edges that causes us to bleed all over the place. CP, thank you for a another great topic/ the ISP pliers. Thank you & my best to you & Henry. TMP from N.J. 😊😊😊
Yes they are
❤great video brother I appreciate your time and effort
Much appreciated
Thanks again for the info
No problem 👍
I purchased the 45° nose but they didnt have the polished tips full nickel plating instead.
As a bit of an old timer and tool addict myself, I've been collecting some of the classic brand sets as they come up complete and in nice condition. But I've also discovered Koken and other excellent Japanese tools. It seems they have something in them that makes them addictive!! Just about everyone on the tube and in real life who tries them gets hooked. Maybe they need a warning on the packaging!!
Well said!
Awesome Long slip joint needle nose pliers 👍👍
I got to find some !!
The only thing is Japanese tools don’t have warranty. But than again it’s great quality
Ya but I've yet to break my Japanese tools
Love my ips pliers but they don't grab like them knipex twins I got
are those flush cutters from jdtco rebranded Kieba cutters ?
Yes, but they are Japan, my favorite. I'm not sure where he gets them, but they are money
@CPthetooladdict I had some old beat up pair from my childhood, dunno how they ended up in the tool box, I later on cleaned them up and was able to get the part number PL-726 and ordered a new pair on Amazon. They are what you said like a hot knife.
I bought a pair on Facebook
THANK YOU！ We are lookin' for American distributors and distributors🔥
@jdtco
Man I just got the hlb-300 from Amazon but the straight ones I want. Where can I get them.? I just ordered their other pliers.
Ebay is where I got mine
They look good. Good video
Thanks 👍
@@CPthetooladdict your welcome
But can they pick up a nickel??😂
Nice!
On it lol
Funny the ad into to your video was harbor freight 😅
Always they pay to have me trash them ots awesome lol
@@CPthetooladdict I found it very comical
I love it lol
@@CPthetooladdict what is really funny. I’m a career mechanic. I’m just now getting my ASE certs. But I have worked in shops for ten years. I use a U.S. general 2 bay as my box, I use my Mac cart single drawer with lid as my roll cart. I use icon sockets and icon wrenches since they have been out. I have traded in one set of sockets just because. I did have their torx bits but they twist super easy. They are now my knock arounds/ stripped one size up lol. The professional no slip and ratchet wrenches are great. Sockets are great and I do have a ratchet for a f around. I gotta say they have held up. On the other hand I have Matco and Mac. Love my 1/2 3ft axis ratchet aka encouragement and my long Matco 3/8 aka persuasion. I think it’s a lot to do with know tool limits too.
That's awesome. It sounds like a smart move!!
CP is currently my favorite TH-camr, wooooooo
Thansk I appreciate 🙏
👍👍
You can clearly see the pride in workmanship is second to none on those pliers? The jaws are hand ground to perfection, unlike the Tawainese one's usually are? The jaws are trued by had, no slop in sight? You don't always have to have a mirror finish or black phosphate coating on the steel? I'd buy them if I were needing a plier of that style, for sure? Good job, CP. It's nice to share all the choices we have in tools, Snap On is not always the best at everything tool related? They have their place in specialty tools, that not many can touch, but there are certainly other options out there?
Is your keyboard broken? You’re using ? Instead of .
CP…. WOOOO!!🎉
🥳🥳🥳🥳
Except the 2nd set of Jaws*
But can they pick up a nickel?
Definitely going to try now just for you lol
@@CPthetooladdict 🤣😂
👍
Mac tools has been making this type pliers for years. Straight jaw P11HD-S Bent nose P11HD-B
News flash they aren't making them they aren't the same they are Sunnex junk
@@CPthetooladdictI have the Mac version for 15 plus years . Good well made pliers. Never failed me .
One pair cost more than both of these so the video wasn't about you just to point this out there are many other people on this planet
Correct Mac are much more expensive. I would buy this brand over the Mac.
I have the same thing rebranded as Matco and made in USA straight and curved ones
What's the part number I don't recall seeing channellock making any model remotely similar that would be the only usa brand
@@CPthetooladdict I believe they are, I will get part # tomorrow they are at work. Maybe I'll make a video and tag you in it if I can figure out how to do it
I mean I don't believe I know what they are
Actually Mac sells a similar set as well
PH11HD-B and PH11HD-S for Mac
Take my money 👍👍
Just get you some jdtco plier handles as a back up...boom problem solved
Exactly
good evening chad 👋🔧🇨🇦👍
sounds like a great deal 👍🇨🇦🔧👋👌
Hello danoh