Great info! I'm shooting a Winchester XPR. I'm getting 2,400fps+ from only 24.5gr of powder with the 170 soft points and Barnes TSX and it's cold outside. Also shooting very consistent. Shot a 3 shot group 1/2" then a 5 shot group that was at 1".
256 here. Looking to reload my own 350 ammo for next year. Currently running xpr, 165 ftx. First group was 1.2”@100 and my next group a month later went to .256@100. Going to do a custom built 350 on a short action with a McGowan barrel for next year.
Very interesting data. I'll bet on enforcer. Also what does your brass/primers look like on the upper limits of those powders? What pressure signs do you look for?
Where are you getting the load data for the Enforcer powder? I pulled down the PDF from their website but it did not have 350 Legend listed in it anywhere.
I have never herd of the ES problem with LiL-Gun. I handload for 450 bushmaster with LiL-Gun and use Remington 7 1/2 SRP, exclusively. 225gr. FTX= 38gr. Lil- Gun for an average of 2260fps. I can't remember the ES & SD numbers but I can put three in an 1 3/4in. group at two hundred yards. I'm loading the 250gr. FTX with 37gr. of LiL-Gun... have not chronograph them yet but I put two touching at a hundred yards. I know this is a 350 legend video but I wonder if LiL-Gun is a primer snob.
It very well could be! Once all this craziness dies down I need to do a primer test. I did one for .223 way back early on in the channel and the results were interesting...velocity gains and changes in accuracy just based on primer.
It used to be listed on their load data online but it looks like they removed it for some reason…I took a screenshot of the information and can send it to you if you’d like… send me an email whembree13@yahoo.com
Okay another powder to try - like you needed another - LOL! I developed loads as well and settled on H110. SD of under 10, 150 grn Maker Rex, 2380 range for velocity. I'm not really near max charge as well. Also getting 1.5" groups at 100 yards. This sub-max with H110 was the most accurate and at 2380 expanded the bullet well in the deer I harvested this year at about 60 yards. I did try Lil Gun and got some pressure signs early. Also accuracy isn't nearly as good. Velocities, as you found, were, but SD were in the 30+ ranges.
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
Have you tried H110 for 350 legend
Great info! I'm shooting a Winchester XPR. I'm getting 2,400fps+ from only 24.5gr of powder with the 170 soft points and Barnes TSX and it's cold outside. Also shooting very consistent. Shot a 3 shot group 1/2" then a 5 shot group that was at 1".
256 here. Looking to reload my own 350 ammo for next year. Currently running xpr, 165 ftx. First group was 1.2”@100 and my next group a month later went to .256@100. Going to do a custom built 350 on a short action with a McGowan barrel for next year.
What chornograph do you use?
Magneto Sporter
Another powder you should try for the Legend is Accurate No. 11-FS. My top 3 powders for the Legend are
1-Ramshot Enforcer
2-Accurate 11-FS
3-H110
Very interesting data. I'll bet on enforcer. Also what does your brass/primers look like on the upper limits of those powders? What pressure signs do you look for?
Where are you getting the load data for the Enforcer powder? I pulled down the PDF from their website but it did not have 350 Legend listed in it anywhere.
It’s from the Hornady load data.
@@alabamareloader ok thanks.
@@MrWalleyeFreak send me an email and I can send you the picture of it...someone posted it in the 350 Legend FB group. judson.hembree@gmail.com
It sure would be fun to find a range around here we could shoot out to thousand yard
Strategic Edge is a really nice range but it’s hard for me to justify paying to be a member then driving nearly 2 hours one way just to shoot.
I have never herd of the ES problem with LiL-Gun. I handload for 450 bushmaster with LiL-Gun and use Remington 7 1/2 SRP, exclusively.
225gr. FTX= 38gr. Lil- Gun for an average of 2260fps. I can't remember the ES & SD numbers but I can put three in an 1 3/4in. group at two hundred yards.
I'm loading the 250gr. FTX with 37gr. of LiL-Gun... have not chronograph them yet but I put two touching at a hundred yards.
I know this is a 350 legend video but I wonder if LiL-Gun is a primer snob.
It very well could be! Once all this craziness dies down I need to do a primer test. I did one for .223 way back early on in the channel and the results were interesting...velocity gains and changes in accuracy just based on primer.
Can you tell me where you got the data for the SBR/SOCOM powder in 350 Legend?
It used to be listed on their load data online but it looks like they removed it for some reason…I took a screenshot of the information and can send it to you if you’d like… send me an email whembree13@yahoo.com
Okay another powder to try - like you needed another - LOL! I developed loads as well and settled on H110. SD of under 10, 150 grn Maker Rex, 2380 range for velocity. I'm not really near max charge as well. Also getting 1.5" groups at 100 yards. This sub-max with H110 was the most accurate and at 2380 expanded the bullet well in the deer I harvested this year at about 60 yards.
I did try Lil Gun and got some pressure signs early. Also accuracy isn't nearly as good. Velocities, as you found, were, but SD were in the 30+ ranges.
I get 1 to 1.25 inch groups at 100 yards with those projectiles under 26 gr H110 out of a 16” ar stoner barrel.
Man it's hard to stay engaged.
Try H110 an cci BR4 primers probably do alot better
how about sticking to the subject 350 legend
Hard to be ramshot powder with Lee dies.
👍🎄
Thats not telework
Ehhhh #tele-twerk