Clean up buddy with micro mat clean up sluice review by prospectors dream
ฝัง
- เผยแพร่เมื่อ 6 มิ.ย. 2024
- I buy and review the clean up buddy clean up sluice by prospectors dream. It has the micro dream mat. This is the first time I have ever used the dream mat so it was a lot of fun learning how it works.
Here is my affiliate link to High Plains Prospectors where I bought mine
highplainsprospectors.com/pro...
Also if you want the 12 volt version or would like to buy it from prospectors dream, here is the link (non affiliate link)
prospectorsdream.com/products... - บันเทิง
Cool setup indeed fam. Keep on having fun getting that Au and living the dream. Gold Squad Out 🤠
Cool new toy brother!
We bought one. Had to trim the mat because it didn't fit right. A real speed controller would be a plus also. I like my toolbox sluice better Nice video though!❤🎉🎉❤
I have seen a few ppl use this thing now and I like it more and more each time I see it used . 👍
I was really impressed
Dream mats are about the best there is . They have a few designs and many sizes of matting on their website. I have seen ALOT of people using them over the last few years it's a small wonder anyone uses anything else. I bet some silicone calking would fill that gap no-sweat. But maybe talking to the designer about it could also present some solutions . Awesome video !
Awesome! thanks for the review!
Good product, fun to use it.
Just purchased mine! Cant wait
Never saw one before but I want one 😂
It is worth it.
I have one. I like my tool box sluice allot better❤🎉🎉❤
Call it a toy if you want to, it looks like it would be fun to run. Thanks for sharing.
I just ordered one I have a lot of experience with dream mat and really liked your review on it these dream mats really don't lose any gold as long as you run them at the right angle and don't over feed them to much but great video
Nice video... kool piece of gear💯🇺🇲⚒️
What a beautiful Kitty 😺
Now that is neat, i have to check that out sweet
Yes, yes, yes!!!!🎉😊🤠👌🇵🇷
Mine is on it's way.. As for the Gap at the top, I will try a piece of duct tape to extend over the gap and over the top of the mat and see if that solves the issue. Thank my friend!
Outstanding video🎉👌👌🇵🇷
At the end of your run, angle your spoon into the feed chamber and into the "gap" you don't like above the Mat. If you do it carefully, a little at a time and side to side, you might be able to wash out most of the black sand and retain most of the gold there. Just have a pan at the end to catch the sluice tails. Cute rig at a good price!
good idea, I will try that.
From what i see, that top guard/funnel focuses too lich material into the center, which will fill up the cells there mich faster than the edges.
I think if you were to modify it a little, it might sluice more consistently by running the cons evenly across the top. It looks like in the video most of the cons stay close to the middle of the mat. I’m thinking about cutting my top lip off so I can sprinkle those cons in more evenly across. Seems like the lip is narrowed down a bit much. Also, maybe try using Marine grade Epoxy to fill in that upper cons catch you identified that was plugging up. Cheers and thanks for the review! I can’t wait to see what their generation 2 will be like.
I'm probably not going to modify this one but I may buy another one and experiment. If a gen 2 model comes out I will get my hands on it and give a go. Thanks for feedback.
You need more toys!!!😂😂😂😂😂
What size are you cladding to for thev clean up buddy.
Like that, Brother 802nd🤠👌🇵🇷
Seems like theres alot of material on top under the mat, WOW
Thanks for posting
I bought 2
Could you bevel the bottom of the mat so it slides up that last quarter inch?
I suppose that would work if the mat was longer. doing that with this set up will just leave a gap at the bottom.
Good tips!🎉🤠👌🇵🇷 10:22
What's the wattage on the pump
Have you panned the stuff caught in that top cavity separate from the mat?
I have not but that is a good idea.
I ordered the grey one with the blue mat, they sent me the same one you have. Not huge deal, I know but still, kinda of annoys me … lol…
That is a bummer. You should reach out and let them know.
Cut the edge at an angle, it shouldhelp
is for children
It's not a Gold Buddy. It's a Cleanup Buddy
oh yeah, good point
88 bucks for a 3d print. They saw you coming.
That's not all that bad so long as it works reasonably well.
That is a toy for someone that dos't really prospect large buckets of cons !!
That is correct. I probably should have made that more clear who it's for. Thanks for your input.
Sus, no fucking way he's finding nugs like this. 100% this is an ad for his buddy.