If you're buying your first setup, I'd recomend you to go with something like the moza r5 or cammus c5 to see if you enjoy the hobby. I don't think it's a good idea to spend a lot of money on your first setup, considering you might not like simracing.
Ok great review as usual but mark my words, one day you'll do an awesome review of sim racing shoes. Those red ones really look great and easy to see on your videos.
@@OCRacing yeah... the thing is i bought them for 180$ they have brake performance kit and i can easily sell them for 350$ like in one day.. they are in a perfect condition.. and i use a r9, what should i do?
I'm currently overhauling my rig and was looking at these, couldn't have come at a better time! great review, looking forward to getting my hands on these 🙌
@OCRacing please can you do a review on the inversion kit i am really intetested because i am more a casual sim racer and more of an on road driving type of guy. Thankyou
yo, im looking into getting into sim racing, i planning to get the cammus c5 paired with the fanatec csl pedals so i can upgrade it with a third pedal and a shifter later, you think that will be a got combo for a fiirst setup?
I think it sounds solid. If you’re going with the CSL pedals though, why not just stay with fanatec for the wheelbase? They’re ready2race bundles are pretty good
I don't know about you guys, but there's a New Zealand website that states 31st October. I'm guessing these are in full production runs rn building up inventory, then put on the slow boat at the beginning of October. Should be the same for everyone else.
I'm definitely considering these pedals. Do you think with the pedal plate, if you did a bit of DIY and bolted it to a some plywood or something, you could use these on a desk setup? Or like most load cells you really need a cockpit first?
@@OCRacing That's what I thought as well, I have the money now so I think I'ma just get the rig; since that's also what you end up building everything else on. Thanks!
I have the simjacks, depending on your configuration they can be either good or extremely inconsistent. They look the part but between the software and the load cell itself there's allot of noise that should be filtered out. Even holding a steady load the numbers will fluctuate quite a bit. Even if you hold say 30% brake with a weight in the software it will read from 27-35% and bounce around between. The only way they work well is with the elastomers replaced by an extremely stiff spring which will require bracing on most entry level cockpits due to brake force required. Edit this is normal simjack pros not the minis or the newer models
![CAMPปลิ้น | EP.82[1/2] แก๊ง 3 สาวเพื่อนซี้บุก CAMPปลิ้นครั้งนี้ห้ามเสียอาการ](http://i.ytimg.com/vi/_6WUjXHe1TM/mqdefault.jpg)
I just love watching reviews of things that I'll never buy lol
I appreciate you watching regardless 🙏
Frfr
This actually looks like a pretty good set of pedals ngl
Still looks good
I definitely like they’re design
@@OCRacing are these mid or high range pedals
@@Nomycarisbetteri feel like they’re a mix of both
@@Nomycarisbetterthey have a price similar to the csl elite v2 pedals so its mid
@@NewbieRacer thx for the advice:)))
i am soo close to buying my first sim setup but now i have to consider
If you're buying your first setup, I'd recomend you to go with something like the moza r5 or cammus c5 to see if you enjoy the hobby. I don't think it's a good idea to spend a lot of money on your first setup, considering you might not like simracing.
Yeah I think I will stick to my Simagic P1000s. Which you should 100% make a review on.
I'm looking for pedals before AC Evo comes out
I’ll see what I can do!
How wiuld you compare them to simsonns pros pedals?
Wow they look really good! Good vid oc!
They are pretty good looking. Thanks for the comment 🫡
P1000s still looks like a much much better kit
Ok great review as usual but mark my words, one day you'll do an awesome review of sim racing shoes. Those red ones really look great and easy to see on your videos.
As a guy who always uses shoes while Sim racing these are looking mighty tempting. when the active pedal comes out its going to be hard to say no
should i upgrade from fanatec v3's??
Depends on the condition of your V3’s 🤣 but I really can’t say as I’ve never used the V3’s
I use them still competitive but with the brake performance kit
@@OCRacing yeah... the thing is i bought them for 180$ they have brake performance kit and i can easily sell them for 350$ like in one day.. they are in a perfect condition.. and i use a r9, what should i do?
@@AmineMokhlisse same❤
Personally i dont think its an upgrade. I will upgrade from the v3s to the ffb pedals when they come out.
can you review the crp2 inversion kit i am interested
Theyre so sick bro 🔥🔥🔥
Indeed
Been waiting for this!
You know I got you 🫡
I'm currently overhauling my rig and was looking at these, couldn't have come at a better time! great review, looking forward to getting my hands on these 🙌
They realized the CRP V1 was awful and decided to copy (again) from others, this time Simagic P1000. Smh
@OCRacing please can you do a review on the inversion kit i am really intetested because i am more a casual sim racer and more of an on road driving type of guy. Thankyou
Hey I love your videos but usally you do a compare between the old and new and i bought the old recently so I hope I made the right choice.
Tbh id probably just get the csl elite v2s. The main reason id be interested in these, is that they seem to be compatible with thier active pedal
Claim your early ticket here
At this rate I might as well not say it
I got you
@@Sigmamale973 😂 nah ur the og one tho
@@Trouble_F1 thx man
@@Nomycarisbetter thx 🤙
0:20
you said the crp pedals was out for several years that’s not true. It’s only been out for two.
Really? I think it’s almost been 3. Either way 🤷♂️
yo, im looking into getting into sim racing, i planning to get the cammus c5 paired with the fanatec csl pedals so i can upgrade it with a third pedal and a shifter later, you think that will be a got combo for a fiirst setup?
I think it sounds solid. If you’re going with the CSL pedals though, why not just stay with fanatec for the wheelbase? They’re ready2race bundles are pretty good
Do you know the release date for this pedal set? According to Moza they just said "sometime in October"
I don't know about you guys, but there's a New Zealand website that states 31st October. I'm guessing these are in full production runs rn building up inventory, then put on the slow boat at the beginning of October. Should be the same for everyone else.
Can't wait for the active boost pedal to swap out the brake on these
Please throttle with your right foot and brake with your left
mr OC racing, you normally recommend the fanatec csl elite pedals for beginners, would you say its worth the extra $200 for these pedals?
If you’re budget can stretch to it, yes 👍
I have brick
I hope this doesn’t mean what I think it means
starting to miss the racing part of your channel
I cant wait to transition from all thrustmaster to moza next year but god damn mozas so expensive
Moza has cheap, midrange and high tier stuff. Something for everyone
I'm definitely considering these pedals. Do you think with the pedal plate, if you did a bit of DIY and bolted it to a some plywood or something, you could use these on a desk setup? Or like most load cells you really need a cockpit first?
it’s hard for me to say. To be honest, I wouldn’t confidently say that you can use these without a dedicated rig.
@@OCRacing That's what I thought as well, I have the money now so I think I'ma just get the rig; since that's also what you end up building everything else on. Thanks!
Why do they also have a hallfx/ potentiometer? Surely load cell is better?
They tend to market it as it helping with precision. However - from my experience I don’t really notice a big difference
bro ur such a good sim racing creator! U deserve all the support u can get!
Thank you sir 🙏
Would you recommend simsonn or sim jack pedals?
I’m pretty sure they’re nearly the same. I’ve only used the Simsonn pedals and they were good for the money.
How they compare to simagic P1000?
I’m not sure, never used those. However, from my understanding they are very comparable.
These, or the SimJacks? Can a novice figure out the SimJacks?
These will be of much higher quality
I have the simjacks, depending on your configuration they can be either good or extremely inconsistent.
They look the part but between the software and the load cell itself there's allot of noise that should be filtered out. Even holding a steady load the numbers will fluctuate quite a bit. Even if you hold say 30% brake with a weight in the software it will read from 27-35% and bounce around between.
The only way they work well is with the elastomers replaced by an extremely stiff spring which will require bracing on most entry level cockpits due to brake force required.
Edit this is normal simjack pros not the minis or the newer models
What do you prefer, the Simagic Gt Neo or The Moza Ks wheel?
Gt Neo for sure
Thanks for your reply!
crp2 or p1000? thats the real question
Can’t say to be honest, I’ve never used the Simagic ones. From my understanding, they should be very comparable though.
I have 300£ out of £699 for the trak racer tr160 mk4
Your editing is just insane. Well done man.
Thank you 🙏
always glad to come back to your content
I appreciate you 🫡
LETSSSS GOOOO NEW OC VID
love you😘
Love you too bro 🙏
You forgot to mention the inversion kit for it!
Video was getting too wordy 🤷♂️
Let’s go been waiting for this
You know I got you 😉
your reviews are so informative
Glad you think so 🙏🙏
I like them. I would buy them.😃👍
What’re you waiting for? 👀
@@OCRacing I'm waiting for surgery so I can feel my feet🤕
Very nice
Glad you think so 🤣
nice
nice 🫡
Yoo how u doing Oscar??
Good and you?
@@OCRacing Not bad either😁
Just ordered my set with a r12 gonna be a huge difference vs my g920 😂
Sheeeesh, should be huge!
1
2
3
4
Only 89 views in six minutes, bro fell off,,,
In the club crying rn
Claim your early ticket here
👇
🤣
first
This is for you: 🥇
Too much hammer and sickle for me.
What does this mean 😅
@@OCRacing where are they developed, and made?
Simagic made in china
Fanatec made in china
Logitech made in china
Your phone made in china
@inot88j24 I dont have any of that lol mines made in Denmark and Finland lol phones made in South Korea lol.
Its called smart shopping.
Good day sir.
1st
No
Unfortunately you were second 🙃
@@OCRacing But I scored a comment from the GOAT :)