10 Tips to Make Your Mercedes-AMG Engine Bulletproof | 6.2-Liter V8 m156 | w211 AMG W204 C63
ฝัง
- เผยแพร่เมื่อ 19 มิ.ย. 2024
- I share 10 tips that will help make your Mercedes AMG engine virtually bulletproof. My engine has been extremely reliable and recently reached 100K miles. I share my recipe for avoiding major failures and increasing the reliability of m156 V8.
_______________________
✅Finally there is a dashcam that doesn't ruin the look of your car. Use the link to get 8% off your FitCamX dashcam order, or use coupon code: AOC8OFF
fitcamx.com/?sca_ref=5519762....
Buy FitCamX on Amazon using the coupon code AudiAFITCAMX: amzn.to/4a0lVib
_______________________
✅Excellent quality LED lights that I use on my AMG. Use the link to get 15% off your Auxito LED lights order: www.auxito.com/Wc8wviDDnmZWP
_______________________
🔥Highly recommend these products:
I use this engine oil: amzn.to/3uyQ0Gu
Oil additives I use:
Motorkote Hyper Lubricant: amzn.to/42JwC68
Ceratec LM amzn.to/49ejCYC
MoS2 LM: amzn.to/48lkbhV
🧯Oil extractor. Highly recommend it to make your oil changes a breeze: amzn.to/3qKfad5
💺The best leather seat cleaner on the market: amzn.to/46e3J2v
🧽 Definitely use this spray after each car wash and thank me later: amzn.to/3t6N9TN
🚪Spray this on your keyless entry door handles and they will never fail: amzn.to/3BWPOzX
_______________________
00:00 My 156
01:13 Tip 1
02:32 Tip 2
03:06 Tip 3
04:21 Tip 4
04:48 Tip 5
05:44 Tip 6
06:07 Tip 7
06:40 Tip 8
07:55 Tip 9
08:58 Tip 10 - ยานยนต์และพาหนะ
What do you do to keep your Mercedes engine run strong 💪?
Check out the description for related content and useful links ☝️
My M156 (2009 w204 C63) is approching 180 000km and it still has the factory old style headbolts, cam adjsters, cams, lifters, PCV and injectors. It runs like a champ, no rattle noise at start-up. It likes to consume oil, that's true (around 0.5L per 1000km). Frequent oil changes and filters are mandatory to keep the engine happy. I wait 20-30min until the oil is fully warmed to go over 3000rpm. I plan to do the injectors soon anyways.
😎 good job staying on top of the maintenance! We’re at about the same mileage.
I have injector DIY video in case it helps th-cam.com/video/qBO-tMAVM08/w-d-xo.html
Your frequent oil changes and monitored driving under 3k prior to operating temp is helping you big time! I do the same with my M157 and M278 engines. When starting cold, I like to let idle for 3min before throwing into gear.
Mine loves consuming oil too, I've recently used liquimoly Mos2 and the oil consumption has improved significantly and less engine noise.
Same pcv? it's a lie, this item should be replaced once per 30k-40k kilometers, more then sure remip999 is a spam bot and post this for money
Yes I changed mine today. The old part was a mess.@@somereal678
Changed to LiquiMoly Molygen 5w-50 oil and the additive recently. Amazing how quiet and smooth my M156 is now. I was skeptical about the reviews , but I am impressed.
Glad to hear you like it. How is the oil temperature? I noticed oil temperatures are lower on mine with the MotorKote additive.
@@AccentOnCars Temps are never high on my engine. I have used LiquiMoly 10W-60 and Lubegard since I have owned it back in 2017. I think the Molygen has high tungsten content. One reviwer went 8500 miles cabbing in CHicago, and stated there is no smell to the oil. Still very slippery to the touch. I have an SL63AMG 2009. Great Tips!
Thanks for sharing! Sl63 is the beast 😎
100% 156 has weak top end 5k oil change m113 10k stronger engine. Good job mate. Italian tune up works for me gets that oil pressure up😂
Funny agree with you, I have the same car in wagon form. These engines need to be revved hard, they do like an Italian tune now an then 👍
Italian tune, LOL. I like that.
Have been watching your channel since you had 100 subs. Glad to see your surpass 10k -- well deserved. You make excellent content.
Thank you for your support! 🤝
Excellent video. Thank you for sharing your wisdom. I certainly did not know the last two.
Glad it was useful 👍
Your input on the rpm rate and oil pressure is genius. Makes so much sense considering these motors suffer from top end lubrication issues. So simple yet never thought of it. Thank you!
Absolutely right! Every 3000 miles without fail. Have been doing this for years across a wide range of high performance cars. Have never had a failure. My low mileage 156 and 157 powered cars, every 3000 miles or annually , at a minimum.
That’s the only way to do it 🤝
Nice to see you and thanks for the video :-)
Thank you :) Appreciate the comment.
Great video!!!
Appreciate that 👍😎
Great video. Congrats on the milestone. Excellent advice for getting your engine 7k rpm (after proper warm up). Not only does it help keep the engine clean but it keeps you smiling😊. I never liked the comfort setting of the transmission. 90% of the time I keep it in the sport setting.
Smiles per gallon is the reason we like these cars 🙂
Solid tips
Thank you for the comment 🤝😎
Very good video. Thank you for sharing. Unfortunately my headbolts failed at 50k miles. Other than that everything has been flawless. Ill need to inspect cams soon though
Sorry to hear that bro. Glad you didn’t give up on it and fixed it 🤝
Awesome video Sir, subscribed! I too have a Merc with M156 engine and wish to keep it running forever as I plan on never selling it. Do you add the Ceratec AND Mos2 engine treatment together? Many thanks
Thank you for your support 🤝 I switched to MotorKote for additives. When using LM, you don’t want to use Ceratec and MoS2 at the same time. You should alternate. You can add ceratec every 2-3 oil changes, and use mos2 in between.
One of the best video for m156’s owners! What brand of engine oil do you use?
Thank you for the comment 🤝 I use Motul amzn.to/3uyQ0Gu
My 07 E63 is at almost 130k miles, I have only owned it for around 10k. It has been great, all I have had to do is motor mounts. I really hope I wont have to do cams and lifters anytime soon. The previous owner said he had the valve covers changed and everything looked good at some point fingers crossed. The head bolts also haven't been changed to my knowledge.
Head bolts is what I was loosing my sleep over so I replaced them preventatively. I hope your car continues to serve you well 🤝
Cool video.
Since you get better experiences with motorkote, do you still use the liquid moly products?
Or do you switch between both?
Thanks! I switched between LM Ceratec and MotorKote and saw lower temps with MotorKote. I still use MoS2 sometimes although I get higher temps. I will stick with MotorKote. A friend recommended it to me. I was sold finally sold on it after watching this video: th-cam.com/video/88vwUwa3igQ/w-d-xo.htmlsi=rKaMzrU0NqC6AZXy
Hey, @8:30 mine has a E63! Awesome video!
Thanks man 🤝 What about 8:30 ? I didn’t understand what you refer to.
@@AccentOnCars joke about grandmothers driving..My granny has a E63 and she drives slow
Ah ok 😂 Some grandmothers drive faster than Hamilton.
Got a 2014 C63 w204 with 90.000 km, bought it with 82.000 km. The previous owner already changed the cam adjusters and lifters, during my 8k km so far I already had one injector stick open when I gave it some properly hard driving. That lead to the engine running weird at first, then not starting at all with a terrible noise. I was lucky though, didn't get hydroblocking and after a new injector as well as spark plugs and oil, the engine was as good as before.
Glad it didn’t seize up, man 👍 The adjusters and lifters on 2014 year are the revised ones with slightly better qualities. It should not need replacement at that mileage. Follow the oil related recommendations I gave in the video.
@@AccentOnCars Yeah, they got replaced under extended warranty. Just like rest actually. Yeah, using 5W40 Ravenol and changing it at least every 5.000 km anyways, until now even more frequently in fact. Thanks for your advice and the video 👍🏻
I have a 2001 clk 55 m113 eng. 140k miles. Bulletproof eng and trans. Full synthetic Penzoil advantage every 5k miles and full synthetic trans fluid every year regardless of miles. Runs unbelievable 👌
I know that engine very well! Reliable indeed. Aside from oil leaks it’s solid (but leaks happen to all old engines). I would still recommend the same as in the video. Changing plugs is twice as expensive on yours as I believe you have two for each cylinder, right? 🤝
@AccentOnCars yes I do. I changed them at 100k miles w iridium ngk. That freak pressure plug port is definitely leaking w the copper crush washer. Difficult to get to so I didn't do it when I did the oil cooler seal job
great info.. any tips for my 2010 ml m273 5.4 liter ? noticing oil smell inside the cab from time to time .. wondering if the catch can would help with this
Thanks! Are you sure you don’t have any oil leaks and the smell comes from the exhaust?
if i'm buying new camshaft adjusters and lifters nowadays, are they using new materials or still the same as the originals?
I assume you talk about m156? Slightly improved design for the adjusters and better coating for the lifters (you should consider buying black series lifters with black coating on top). You can buy adjuster plates and rebuild your adjusters to save money.
My W204 c63 has done 122k don't have any issues touch wood. I change my engine oil every 2k miles and I let my engine warm oil till its 80c before I let the rev gose over 2000rpm I've replaced all my injection and changed the pcv valve. Look after that engine will never let you down
💯
Look like we have the same idea and we look after our car is the same way 👏
Interesting remark you made about the oil pressure. Did you actually measure the pressure? When driving here in the netherlands it is often around 1200rpm. I have an E63, as well as an E500 M113.
Can’t ready the oil pressure while driving
Afaik 1-3 bar or 14-41 psi is the range
@@AccentOnCars is there a pressure sensor that I can access through obd?
I am not sure but 63motorsports sells a kit
Will the engine oil temp still get up to over 80 if there’s additives in the mix
Yes, definitely. Some additives can lower temps by a few degrees celcius by reducing friction slightly, but the engine will reach normal temperature. M156 especially runs hot.
What about transmission service? I read recently that it should be done every 40k miles. Also, have you upgraded your transmission pan and filter?
Yes, transmission service is due every 40k miles or 60k km. But even doing that didn’t save me from the speed sensor failure built into the conductor plate. I replaced the conductor plate + valve body 😀 I have stock pan.
@@AccentOnCars what are the symptoms of that failure?
In my case, it would get stuck in any gear and not shift adequately.
Mercedes recommend every 50k miles. I do mine every 25k.
👍cheers
🤝
no brother i have 2010 s63 83000 miles i agree with you make clear sense simpl i used to do my s500 s550 oil changes every 5k transmission every 40k but ima do every 3000 miles and what about transmission how often you recommend doing it? i dont care about the cost my guy is cheap and all genuine and this cars if u r cheap then dont even buy it even if you have the money to buy it dont buy it! lol
S63 is a beast 😎 I have video about the transformation too, bro : th-cam.com/video/JG20vSZ5ILU/w-d-xo.html
Every 40k miles 👍
My 722.9 shifted into 7th unexpectedly after rolling up to 120 from 40 in 2nd. Could that be due to oil starvation? 2016 E63S M157 with 55k mi.. I also got a check oil level - add 1 qt when driving in 1st and 2nd only in a 25 mph zone. I just changed my trans even though the dealer did at 45k as well as the rear diff. I'll do my front diff during my next oil change with the trans fill adapter. Also, I think I spotted a front diff and/or coolant leak. My coolant resevoir is definetely not holding up. I'll know if I'm screwed once my oil comes out all milky but I'l keep topping it off until then
Funny I am working on 722.9 maintenance video at the moment 😎
You should have a 7 speed MCT transmission in your 2016 E63S. I don’t believe it would go all the way up to 120 mph in the second gear. It will be in 3rd or 4th gear during hard takeoff. But if you lift off and coast for a bit it will go into 7th. If it acts up again, I’d say get it diagnosed for any codes, fluids, etc. It’s always a good idea to service it regularly per manufacturer specs.
Check your engine oil level and keep it at the max mark. M157 burns oil. The best thing you can do for m157 is to disconnect the oil pump solenoid. Watch this video th-cam.com/video/MuZJSGN8qZ4/w-d-xo.htmlsi=p8Ipgaziuby8m9Jc
Yes I was in manual and most likely in 4th AWD sport config. at that speed but it was as if the car just went into limp mode at above 100 mph like a safety feature. As for codes, it read P2610 (Engine ECM/PCM Engine off timer performance), P0120 (Throttle/Pedal Position Sensor Circuit A), and P2377 (Turbocharger Pressure Inlet Sensor)
I’m coming from the e63 video what should I pay for a really nice 66k 2008 e63
You can use car sales websites such as cargurus, autotrader etc. to see what they sell for in your State and nationwide. Someone I know recently sold their E63 with less than 50k miles for $30K. I think yours should be around 20 or so but again, check the market. Also depends on the car and how much you are ready to pay for it
Lol @ oil scientists 😂
😂👍
ne deer e bu
if you buy an m156 car, first things first, change the injectors! don't buy ome, get better aftermarket.
nope, buy an amg, aftermarkets are bad quality
The 🚗 is what a E63?
Yes, E63.
I wouldn't do any additives. Because you want to hear your engine, if something is wrong or so.
Additives aren’t going to hide serious issues such as engine knocking. They can fix minor lifter ticks but won’t fix worn out parts.
The engine is not gonna ring like a bell - Ceratec is good for the engine.
yalan deme
question: what do you let your oil temperature get to before driving the car ? also what oil temperature is safe to rev past 2k rpm ?
I usually wait until the oil temp reaches 40C at least and then start driving slowly. I crawl slowly at first and then drive it normally but very smoothly. The 7g rushes to higher gears so you don’t go over 2k anyway. I don’t drive it spiritedly until the oil is at least 90c.