Great job with the filming/editing and music.. I really enjoyed this. The wrap came out great too! Great attention to detail. Keep up the great work my bro!
@@mainder11 I ordered two rolls of 1x5 ft. And had some left, I highly recommend to do 1.5x5 because the center console is like just a hair bigger than 1 ft.
Hey i saw your other video about the rear bumper and you said you wanted new tail lights i recommend you to get a lci trunk swap it fits perfectly on the car. Keep up the good vids and im definetly subbing Edit: there is some videos of how to do it you might need to code it a lil bit but it works perfectly
ESG do you think i should diy wrap my car i’ve been wanting to wrap it gloss storm grey but im scared because i dont want to mess it up and i dont wanna pay for someone to do it.
HELP PLEASE! I can't remove the central trim connector for the dtc/hazard lights ... it is stucked inside. I tried to pull it really hard but it's not getting out :(
Prepare with a good clean, use alcohol. Use enough wrap so that you can stretch it without touching the edges you want to remain stuck. Heat doesn't add adhesive, so only use it for stretching around corners. You can purchase an adhesive activator pen for marking edges also, if you wanna make sure it sticks good... not essential though.
Wrapped car, wrapped interior. And in the end: "Ok guys, Imma wrap up this video today..."
edvinas132 😂😂😂
You can remove the ashtray cover with a pry tool and pop the silver detail out for wrapping then put it back in for a real professional finish 🤘😘
@bobolinkr
How do you pop out the silver bit?
did not expect it to look this good. Well done!
I COULD NEVER DO THIS KIND OF WORK IN A MILLION YEARS SO MY HAT IS OFF TO YOU.
Great job with the filming/editing and music.. I really enjoyed this. The wrap came out great too! Great attention to detail. Keep up the great work my bro!
I cant believe u managed to wrap that big piece with so little heat😂
why nobodys shows outside corners. how they really cuts them and how to make then look good from side view
Did mine carbon fibre but taking off doing the black matte it looks much nicer
Was that a Heat gun or a hair dryer?
Nice car...And why not carbon fiber vinyl for interior?
Looks hella classy and oem bro, good job
I’m about to tel me bro to do this, how much did you spend in total?
Nour Hummadi About $50
@@esgworks how much wrap do I need to order for a e92?
@@mainder11 I ordered two rolls of 1x5 ft. And had some left, I highly recommend to do 1.5x5 because the center console is like just a hair bigger than 1 ft.
Like that 3D effekt "EUROGANG" under the wrap
Shouldn't the brush marks be lengthwise?
In the centerpiece, you won't have to deal with those wires if it's a manual
Does the summer heat affect the wrap at all, 100° +
How much would you charge for long center piece (push start piece) and the shift knob piece ? From LA area! Love the dedication .
Hey, how much wrap did you use for the front and back??
that looks amazing. good job, I'm going to do some interior wrapping in my E60 on the plastic stuff that has that rubberized coating peeling off
Thanks for this nice tipp, didn't knew it and im about to wrap my interior this weekend too! Lovely comment
Need more video about this car bro
Hey i saw your other video about the rear bumper and you said you wanted new tail lights i recommend you to get a lci trunk swap it fits perfectly on the car. Keep up the good vids and im definetly subbing
Edit: there is some videos of how to do it you might need to code it a lil bit but it works perfectly
TheHasteGaming yep I’ve been looking into that, might have to do it next! And thanks homie!
ESG no problem bud👍🏻
ESG do you think i should diy wrap my car i’ve been wanting to wrap it gloss storm grey but im scared because i dont want to mess it up and i dont wanna pay for someone to do it.
That’s clean
What's the size of wrap one need to buy to wrap the interior of your car just like what you did.
1500 x 500
HELP PLEASE! I can't remove the central trim connector for the dtc/hazard lights ... it is stucked inside. I tried to pull it really hard but it's not getting out :(
Had the same issue and broke it lmao
Pull out the center cube !
Hi there good informative video appreciate the effort you have put in. Nice music, can you tell us the artists. Cheers
Nice job!
Where can be problem if wrapped trim gets bubbles after couple months? bad wrap or bad wrap job?
Well, both... Everything you wrap, you need to heat it really good, and most important you need to clean everything you wrap.
Prepare with a good clean, use alcohol.
Use enough wrap so that you can stretch it without touching the edges you want to remain stuck.
Heat doesn't add adhesive, so only use it for stretching around corners.
You can purchase an adhesive activator pen for marking edges also, if you wanna make sure it sticks good... not essential though.
Hei , i'm from Romania and i love you're videos. Good luck with next videos
Man... Wraping isn't for everyone, I know it looks easy but it's because someone knows how to do it in the right way...
Be careful if you have the aluminium trim as it bends really easily and is hard to get the bends out.
I bought all of the stuff I need to do this, just watching some other people do it so i don't fuck it up
Awesome video man!! definitely doing something similar to this whenever I get my car. question, what camera are you using?
Patrick Pinto Sony a6300
Where did u got the sticker?
Beautiful job!
How long does the vinyl wrap last after its applied?
the one i had before was on for over a year and was still good
Looks 🔥🔥🔥🔥
Good stuff brother 👍
"this is what i did instead of getting an oil change"
Sounds about right rn
Nice
21:26 - clearly only cared about how it look from the outside with that wrap around the door... looks terrible
Lol one little imperfection. And was heated up & squeegee’d out. This shit is tough man, especially for a beginner.
Smaller corners are a bitch, textured vinyl is even tougher, trust me.
For $50 it looks better than it did, though brushed steel is a bit 'meh!'
Did you come to bash him ? Dude tried and for what it's worth, came out awesome. You can state your opinion without being a miserable prick
Guys don't buy anything like that if u dont have a heat gun
Hair dryer works fine, ......noob !
Heat guns are only like $30 snyways lol
before the car was more beautifull w/f
The way You did take out the trim is very very amateur... take your times bro for a pro finish
What do you mean? Came out good
@@esgworks yes brushed steel is perfect
You're living with a ghost.
Why do you say that? Lol
@@esgworks lol, your door. From the vid it doesn't look like wind could blow it.
damn I just saw that 😂😂
Oof thats an L my 1x5ft piece just came lmao
u took to long.. good job
Absolutely disgusting interior. The wood looks ugly as hell. I’ve been looking at these cars but I would have to wrap it before I could even drive
SMFH
what