I used to replace bios chips but always did a bios dump of the chip first but for the last 6-7yrs I just reflash them it's quick n easy when you've got a collection of known good bios files for most models & programmers are dirt cheap so why not it saves waiting for the chip & there's more money in it!
@@gdubleu is therr some other method? on website i sesrching and it can reprogram but i dont know what to change in file that load from bios chip. need change region sn and efi lock
Sorin, I know you read the comments so will write a very short thank you and share a tiny story - Thank you for all the content it has been very helpful and entertaining I see them everyday you upload them. I also see some videos from NorthridgeFix where I see him inducing current into the MB's to spot the short circuit but he has a termal camera, I laughed so much when he said he couldn't spot the issue if he didn't had the thermal camera... Made me wanting to get all your videos where you burn your finger in order to find them... hahahahaha. You are awsome and again thank you! P.S.: If I ever get rich I will send you a thermal camera to stop the pain :D
It is usually refered to as short killing. The idea that the injection current would be able to burn out the short and release it. Usually we keep that from happening on MLB because there are other potential harms can be done. Iso and petrol work well to find the hotspot but this can kill the board in many cases. What I wouldn't give for a thermal camera. It would save hours.
How much would it be for a thermal camera that would work for the job ? On AliExpress prices start under 50$ for small ones, others are around 200 to 300$, would they be useful for fixing boards ? If not, what is the cheapest good enough thermal camera ?
Don't " a thermal image scanner " , just a simple infrared temp probe. I have using one from Harbor Freight for years. Only need to take side/bottom cover off & scan for perp.
I've seen others where they connect a cable to do it and there's no soldering but if anything Ill try this method I feel confident I can get it done after watching this
Thanks for the detailed video. I did this and now it boots perfectly fine. Now I have two new problems. 1. Keyboard not working 2. Battery does not work without plugging it to charger
After solder back the compatible bios chip you have to start up the computer making a SMC reset and a PRAM reset. For better result a CLEAN ME REGION must also be performed on the chip. The processus is well documented on the web.
No need to replace chip, read EFI using connector on logic board and clear Firmware lock in Hex editor. Then write clean dump back to chip. Takes 5-10 min and no need for soldering.
Keep in mind when you replace the EFI chip or flashing it from the web, you are changing both the devices and motherboards serial numbers. Many macs/macbooks around the world would then have the same serial number. What happens if one of these machines gets reported stolen?? The best way to unlock it (if there is nothing else wrong with the firmware) is to dump the ROM, clear the password and then flash it back again. This way you keep the identity of and the optimized firmware for this machine.
I got this model a few days ago at a flea market very informative repair video thanks for the upload. Fun fact I brought a $24 bios from eBay for this board and wasn't sure the $15 with a different brand name would work?
update been trying to unsolder that chip for over a week it will not come off like it is described I got the supposed best no clean flux hot Air set to 450 wind 6 and tried all head attachments with no luck it's still coming on so at this point haven't damaged any surrounding circuits I never had a Mac in my life thought it would be a fun project disappointed. I am 69 years old been building and working on electronics sense the boy scouts Ham radio KD6TXB my first PCB repair technician was with Packard Bell and NEC networking computers so I know how .
Before buying a secondhand apple computer, always check to see that the Apple ID is logged out, control R to see if the EFI is locked and get the mobile number of the vendor before buying.
Hi, it is great content and super helpful. However, I had the same problem when I bought a Mac on Ebey 3 years ago and recently when I tried to upgrade and wipe out my data I found there was an EFI password and I was surprised. Where is your location so I can bring it to you and change that chip? I have important data on my Mac and don't want to lose it. Let me know if you are based in the UK.
There is never a good thing to bend boards like that much especially when working with heat! Rohs balls can screw from the cpu or gpu. But it is also true taking the motherboard out will take time and the client will not pay for that time unfortunately- a lot of ppl think electronics are such an easy job that deserve very little money 🤦🏻♂️
Hi hope you can help...we get a lot of MacBook from companies for recycling and normally hdd are wiped.However how can i find is the laptop locked ? quickest solution thanks,
Tell me please. MacBook 15 2015 keys do not work (RTYUIO) and E does not work well, are there any repair options without replacing them with a new keyboard? Thank you in advance!
If we remove one ram card, will it remove the password lock? There is another youtube video that does that to remove the password lock on iMac. Once it is removed, he puts the RAM card back in.
When yuo replace BIOS chip or reprogramming chip before that you have a modify by hex serial of you MacBook because FaceTime or similar don't work because the serial aren't the same and iCloud or another service don't work correctly
Sorin.. maybe in UK you can receive a new chip in 48h.... but i'm on Italy.. I have to order it also in UK and I receive the chip after 10 days... for me is better to delete the password directly on eeprom using a cheap programmer.
Hey. I do this frequently. There is a better way. Not only that but unless you bought a preprogrammed bios with the serial number programmed into it. Then this MacBook will surely run into trouble.
@@bujarberisha5834 not easily. There is no way to do this without a flashing device with which you can flash the bios. The vivobook uses a very standard bios chip with exposed pins so it is possible to flash without removal of the chip using a clip. Altho I personally prefer flashing the chip off the board.
You can overcome this password by just removing 1 RAM chip, and keep the 2nd one. Now boot it up, and you'll see no password. When you're done with the installation, put the 2nd RAM chip in place, and job is done. No need to solder anything in this particular case :).
How much charge for your work? Plz explain and upload a video about job many job charge. Hope you are well. You are like father to me. Love you old man.
Se si installa il sistema e da errore data é perché i certificati di installazione o sono scaduti ( data troppo recente ) oppure non ancora vałidi ( data troppo vecchia )
You'll need to find a broken or used motherboard (ebay) and transfer the bios chip from the donor to yours. Or you can remove the bios chip and buy a programming tool and re-flash it with a working bios firmware.
Pretty sure it's Amtech NC 559 V2, Amtech VS 213 A works fine too, just make sure you get genuine Amtech and not some fake stuff. Sorin also made a video about making flux yourself: th-cam.com/video/9xk76e7nzcw/w-d-xo.html
experience, and worst case you can probably just look up the model number + bios chip and you will find an image/serial number that matches one you see on the board.
Not really. It means someone forgot their apple id and locked their ass out. It obviously can be stolen. There is a legit way to get them unlocked just call Apple and provide proof of purchase. But of course that's easier said than done. You can also do that with any aasp but they still need the POP and the process takes time.
I suppose it depends how you define easier. But I think it's easier to rip the bios and wipe the lock. Flash it back. Otherwise you must find a proper bios with the correct details for this exact board revision etc. That is non trivial. Oh also must alter serial number to remove the lock properly. Or else it's just going back to is lock when it goes online.
Either the person who sold it on eBay did not reset the laptop properly i.e. they did not remove the iCloud password on the system or they stole the laptop. I would curious if there was any data on this laptop when the person got it from the ebay seller.
@@GregM there is a scam where laptops are sold on ebay to an innocent buyer. Working fine for a short while and then boom activation locked. The seller asks to return the item for refund and obviously they don't get one. At that stage ebay has washed their hands of it and they don't care.
Now anybody stealing Apple laptops can get into them based on a simple premise; "ignorance is bliss." I don't approve, but here's how to break into a stolen laptop. haha
Why do you not just remove password. To read the EFI chip met een programmeur like the ch341a. Open with hxd editor en research for #SVS REPLACE ALL THE LINE WITH FF . and password is gone.
For teaching purpose, this video is not good. The technician is sloppy and lazy. Provides very little intro, or technical information. Perhaps because his English is poor. He takes a short cut by leaving motherboard on case to save about 5 min of time. He pries the motherboard with a touchpad. No doubt the circuit board is slightly warped by the prying. Below the motherboard is a keyboard covered in carbon paper. Then, the worst of all, he applies heat while the motherboard on the case and warped. This instruction is not good for a beginner. Avoid it. There are better postings on this medium elsewhere.
![[2017 and older ONLY] MacBook Air Firmware Pass / iCloud Lock Removal - LFC#275](http://i.ytimg.com/vi/ar37ye4gdOs/mqdefault.jpg)
![[2017 and older ONLY] MacBook Air Firmware Pass / iCloud Lock Removal - LFC#275](/img/tr.png)
![[Live] : ONE 169 วันนี้!! "อนาโตลี vs อูมาร์"](http://i.ytimg.com/vi/IK3YZVWuFJg/mqdefault.jpg)
![“อ.เบียร์ คนตื่นธรรม” มาตามคำเรียกร้อง แหกศาสตร์ฮวงจุ้ย เตือนสติอย่างมงาย | แฉ 7 พ.ย. 67 [1/3]](http://i.ytimg.com/vi/5fc4S3xBNfc/mqdefault.jpg)
Making knowledge free and public is a power no one understands. Thank you so much!
I used to replace bios chips but always did a bios dump of the chip first but for the last
6-7yrs I just reflash them it's quick n easy when you've got a collection of known good bios files for most models & programmers are dirt cheap so why not it saves waiting for the chip & there's more money in it!
What's the process of flashing the bios do you have to remove it and kind of reprogramme it or how does it goes? Thanks
but you must set up a district and serial number ? or what? i need clean bios for
a1466 and a1502
Medusa 2
@@gdubleu is therr some other method? on website i sesrching and it can reprogram but i dont know what to change in file that load from bios chip. need change region sn and efi lock
@@ristatrios82 th-cam.com/video/GLv7jiStHyk/w-d-xo.html
Sorin, I know you read the comments so will write a very short thank you and share a tiny story - Thank you for all the content it has been very helpful and entertaining I see them everyday you upload them. I also see some videos from NorthridgeFix where I see him inducing current into the MB's to spot the short circuit but he has a termal camera, I laughed so much when he said he couldn't spot the issue if he didn't had the thermal camera... Made me wanting to get all your videos where you burn your finger in order to find them... hahahahaha. You are awsome and again thank you!
P.S.: If I ever get rich I will send you a thermal camera to stop the pain :D
hahahahha i love when sorin burn the finger
Yes a thermal cam is must if your budget allows 👍
God bless you for your thoughts. 💐
It is usually refered to as short killing. The idea that the injection current would be able to burn out the short and release it. Usually we keep that from happening on MLB because there are other potential harms can be done. Iso and petrol work well to find the hotspot but this can kill the board in many cases. What I wouldn't give for a thermal camera. It would save hours.
How much would it be for a thermal camera that would work for the job ?
On AliExpress prices start under 50$ for small ones, others are around 200 to 300$, would they be useful for fixing boards ? If not, what is the cheapest good enough thermal camera ?
Don't " a thermal image scanner " , just a simple infrared temp probe. I have using one from Harbor Freight for years. Only need to take side/bottom cover off & scan for perp.
You are one good man, I watch your videos daily and I learn everyday something new.
I hope that one day I could do things that you do so easily :D
I've seen others where they connect a cable to do it and there's no soldering but if anything Ill try this method I feel confident I can get it done after watching this
Thanks for the detailed video. I did this and now it boots perfectly fine. Now I have two new problems.
1. Keyboard not working
2. Battery does not work without plugging it to charger
After solder back the compatible bios chip you have to start up the computer making a SMC reset and a PRAM reset. For better result a CLEAN ME REGION must also be performed on the chip. The processus is well documented on the web.
and serial nummber will not be same.
No need to replace chip, read EFI using connector on logic board and clear Firmware lock in Hex editor. Then write clean dump back to chip. Takes 5-10 min and no need for soldering.
You have any video link on how to do it that way. I have never heard of that but would be nice if that is true
I would like more info about this
I suggest using aluminium tape instead of kapton tape. Aluminium tape reflects heat, while kapton absorbs it.
HAHAHAHA, Yes, put something very conductive on/near a circuit.
@@Gualluecious Did you saw the battery was disconnected? 🤔
Keep in mind when you replace the EFI chip or flashing it from the web, you are changing both the devices and motherboards serial numbers. Many macs/macbooks around the world would then have the same serial number. What happens if one of these machines gets reported stolen??
The best way to unlock it (if there is nothing else wrong with the firmware) is to dump the ROM, clear the password and then flash it back again. This way you keep the identity of and the optimized firmware for this machine.
Really like your videos! Keep up with the good work!
I got this model a few days ago at a flea market very informative repair video thanks for the upload. Fun fact I brought a $24 bios from eBay for this board and wasn't sure the $15 with a different brand name would work?
update been trying to unsolder that chip for over a week it will not come off like it is described I got the supposed best no clean flux hot Air set to 450 wind 6 and tried all head attachments with no luck it's still coming on so at this point haven't damaged any surrounding circuits I never had a Mac in my life thought it would be a fun project disappointed. I am 69 years old been building and working on electronics sense the boy scouts Ham radio KD6TXB my first PCB repair technician was with Packard Bell and NEC networking computers so I know how .
Before buying a secondhand apple computer, always check to see that the Apple ID is logged out, control R to see if the EFI is locked and get the mobile number of the vendor before buying.
Wouldn't say it's a bad idea.....atleast we're here learning from you...
i;ve been doing this for over 9 years lol ... and now i see you posting this :)) funny
Does new MacBooks like m1 has winbond chip to remove or program?
Nice videos I really appreciate your effort can you please show us your beautiful cameras you are using them
Love The Fact You Show How People from Poorer Countries can fix Things...!!!..in other Videos..
Youre the best Master Sorin. 💪👍
Thank you for sharing your technical knowledge
You look a bit tired Sorin. I hope everything is OK.
I also have this idea...
Apple can often unlock these for no charge. It's worth calling them first. There's an EFI tool you can run from a USB stick.
Hi, it is great content and super helpful. However, I had the same problem when I bought a Mac on Ebey 3 years ago and recently when I tried to upgrade and wipe out my data I found there was an EFI password and I was surprised.
Where is your location so I can bring it to you and change that chip?
I have important data on my Mac and don't want to lose it.
Let me know if you are based in the UK.
Thank you very educational
Does the new chipset not have to be programmed?
Could you do a video showing how to fix that USB flash drive stick, thanks.
There is never a good thing to bend boards like that much especially when working with heat! Rohs balls can screw from the cpu or gpu. But it is also true taking the motherboard out will take time and the client will not pay for that time unfortunately- a lot of ppl think electronics are such an easy job that deserve very little money 🤦🏻♂️
Thank you so much Sir! I've learned a lot from you...
Thank you master Sorin!!!
Hi hope you can help...we get a lot of MacBook from companies for recycling and normally hdd are wiped.However how can i find is the laptop locked ? quickest solution thanks,
NICE ! great video as always sir very informative very direct also
Hello where did you download the Catalina and burned usb thanks!
Wonder if this would work with an iPad mini?
Tell me please. MacBook 15 2015 keys do not work (RTYUIO) and E does not work well, are there any repair options without replacing them with a new keyboard?
Thank you in advance!
If we remove one ram card, will it remove the password lock? There is another youtube video that does that to remove the password lock on iMac. Once it is removed, he puts the RAM card back in.
Thanks Sorin does this work with I phones I pads etc
No since the secure enclave on those devices encodes the information across several chips at least on phones.
Did you just stick a brand new unprogrammed NAND onto that board and it works?!
Watching the way you fix's electronic equipment you make my skin Crawl....
Makes me cringe sometimes too.
date and time are used to validate security certificates that might be used by installer to authenticate the code.
Thanks
Replace the bios chip won't lose the serial number of mac ? And other stuff?
Yes it will
it is not necessary to put a new chip, just put the removed chip in a CH431a reader and edit the bin file.
master sorin
When yuo replace BIOS chip or reprogramming chip before that you have a modify by hex serial of you MacBook because FaceTime or similar don't work because the serial aren't the same and iCloud or another service don't work correctly
There is no way to contact Apple to get back into a laptop?
Enjoy your holiday.
Thanks for the video Sorin.
No.
What happened to your electrical screwdriver 😔
Sorin.. maybe in UK you can receive a new chip in 48h.... but i'm on Italy.. I have to order it also in UK and I receive the chip after 10 days... for me is better to delete the password directly on eeprom using a cheap programmer.
Agree!!
Where are you located?
Which metin2 server will you be on, Sorin? Also a character name and nation can be useful :))
Usually i play on Tiger Ghost, but tomorrow the new server comes out, i will play on EST region
Hey. I do this frequently. There is a better way. Not only that but unless you bought a preprogrammed bios with the serial number programmed into it. Then this MacBook will surely run into trouble.
I bought asus vivobook on ebay.
Can yoi help me to reset/unlock bios without remowing bios chip.
@@bujarberisha5834 not easily. There is no way to do this without a flashing device with which you can flash the bios. The vivobook uses a very standard bios chip with exposed pins so it is possible to flash without removal of the chip using a clip. Altho I personally prefer flashing the chip off the board.
@@yodaco Best way, the clips are so unreliable.
@@sallybundock1179 yeah super hit and miss with clips. I tried all kinds. Got one cost like 20bucks. Worst clip ever
go to SetUp and Enable usb
good evening my dear friend
Sir, what is BD6 in smd symbol?
Please help me. I am in the same situation
You can overcome this password by just removing 1 RAM chip, and keep the 2nd one. Now boot it up, and you'll see no password. When you're done with the installation, put the 2nd RAM chip in place, and job is done. No need to solder anything in this particular case :).
Ram is solded to the board..
This method only works on very old MacBooks (maybe 2010 and older).
@@lenm2857 thnak you, didn't check on the newer ones. Good to know :).
How much charge for your work? Plz explain and upload a video about job many job charge. Hope you are well. You are like father to me. Love you old man.
I bet the lime usb drive is ok, just the corrupted image/files.
Se si installa il sistema e da errore data é perché i certificati di installazione o sono scaduti ( data troppo recente ) oppure non ancora vałidi ( data troppo vecchia )
Hi sir, my lenovo laptop got brick while it updating Bios and now no sign on the laptop (no charging light, no hard boot). Please help me out.
You'll need to find a broken or used motherboard (ebay) and transfer the bios chip from the donor to yours.
Or you can remove the bios chip and buy a programming tool and re-flash it with a working bios firmware.
Replace bios chip or reprogram. Professional job ! $$$..
can you do the same with an iphone ?
@Michelle Luna looks like a scam
whats the name for that Flux you are uing?
I think maybe AMTECH Tacky Flux
amtechdirect.com/shop/amtech-syntech-tf-no-clean-high-temp-tacky-solder-flux-rol0-10cc-syringe/
Pretty sure it's Amtech NC 559 V2, Amtech VS 213 A works fine too, just make sure you get genuine Amtech and not some fake stuff.
Sorin also made a video about making flux yourself: th-cam.com/video/9xk76e7nzcw/w-d-xo.html
how do you know that that chip is the bios chip and not another one
experience, and worst case you can probably just look up the model number + bios chip and you will find an image/serial number that matches one you see on the board.
U will see the word WINDBOND on the ic chip..
I wish I could work with you
If someone has a padlock, it means that the laptop is stolen.
Not really. It means someone forgot their apple id and locked their ass out. It obviously can be stolen. There is a legit way to get them unlocked just call Apple and provide proof of purchase. But of course that's easier said than done. You can also do that with any aasp but they still need the POP and the process takes time.
I suppose it depends how you define easier. But I think it's easier to rip the bios and wipe the lock. Flash it back. Otherwise you must find a proper bios with the correct details for this exact board revision etc. That is non trivial. Oh also must alter serial number to remove the lock properly. Or else it's just going back to is lock when it goes online.
Either the person who sold it on eBay did not reset the laptop properly i.e. they did not remove the iCloud password on the system or they stole the laptop. I would curious if there was any data on this laptop when the person got it from the ebay seller.
@@GregM there is a scam where laptops are sold on ebay to an innocent buyer. Working fine for a short while and then boom activation locked. The seller asks to return the item for refund and obviously they don't get one. At that stage ebay has washed their hands of it and they don't care.
In New York
hello Sorin, i wonder why you don't just reprogram it ?, why replacing it ?
Maybe he didn't have the tools
@@mistsemy1522 maybe, but i think its more complicated with the SN being in the bios?, i don't know this is why iam asking ^_^
Follow ☝🏻him now if you can't follow the video
👍
Not that easy with iPhones...
Now anybody stealing Apple laptops can get into them based on a simple premise; "ignorance is bliss." I don't approve, but here's how to break into a stolen laptop. haha
Only good for old Macs.
2017 and older
Why do you not just remove password. To read the EFI chip met een programmeur like the ch341a. Open with hxd editor en research for #SVS REPLACE ALL THE LINE WITH FF . and password is gone.
He finds it easier to buy a blank one for 15 and save time
@@user-te1le7ck6b yes but it is only 5 min and much cheaper you do not lose anything like serial nr etc...
For teaching purpose, this video is not good. The technician is sloppy and lazy. Provides very little intro, or technical information. Perhaps because his English is poor. He takes a short cut by leaving motherboard on case to save about 5 min of time. He pries the motherboard with a touchpad. No doubt the circuit board is slightly warped by the prying. Below the motherboard is a keyboard covered in carbon paper. Then, the worst of all, he applies heat while the motherboard on the case and warped. This instruction is not good for a beginner. Avoid it. There are better postings on this medium elsewhere.
“Those who can, do; those who can’t, teach,” or in your case lecture
Review then edit your message before posting. That is my "lecture" to you.
Thanks
Follow ☝🏻him now if you can't follow the video