Support/JOIN : th-cam.com/channels/aQRmy4Beww-riYiV44qjhg.htmljoin My Short Guide about EPOXY RESIN: www.amazon.com/Short-Guide-about-EPOXY-RESIN-ebook/dp/B07ZWKS2PV Bubble Removal Machine: amzn.to/3BxnNTe
Awesome resin creation it's so nostalgic brings back my childhood when this thing was a new trend back in the 90's everyone wanted this artwork in their homes. They were expensive back then but it's even more rare and pricey maybe you show this to soda companies so they can turn it into souvenirs you can make money with this. Lots of love and blessings.
I really like the fact that you've used a lot of many of the different methods to get to the final product. For something that looked so easy to do, there were a lot of techniques and thoughs involved into this one. Nice results ! ❤
That looks really neat :) The few bubbles that didn't come out don't even look out of place, they look like the fizz from the liquid or the drops of condensation on the sides of a cold can
Lots of fun! Now I'm tempted to go back and figure out how many times you waited for something to dry. You must spend a week just waiting for stuff to harden on each of these projects.
It's been a long time since you showed up in my feed for some reason. I just started the video, but I'm very curious how you'll make this one! Thank you for the upload
That was brilliant i love it well done. And my favourite soda is lemonade what’s yours? Anyways I just want to say well done on that coca-cola resin art 🖼️ and keep up the great work your doing and see you next Friday yay😁👍.
Very nice! Would it have been possible to place a cut part of a real drinking glass inside the epoxy? And adding a few transparent, glittering drops to the surface of the can to simulate a super-cooled soda can? Plus a few greater air bubbles on the downflowing softdrink spill?
I like the idea, but i want to add constructive comments: - I can see your finger prints on cola stream - cotton doens't look like cola foam at all. I saw you did foam more really look - cola stream is very smooth. It would be better if it had water-like wrinkles.
This and the Zippo lighter project (Which i will do in time) are now my favorites mate ... you never fail to amaze me. Also is there any issue with toxic fumes. My partner was sitting next to my work at her easel and told me after a couple hours she felt odd??? Just a question ... thanks again.
@@jedrek29t Thanks mate ... I'm in Australia now after 9 years US Army including Vietnam (2/502 Infantry, 101st Airborne) I see Amazon sells it state side ... I'll check them out. Shipping is always a bitch. I get most of my gold leaf supplies from London in 6-7 days, but the USA is from 2-4 weeks. I don't know who Trump put in charge, but I'm sure the shipping times are loosing companies money ... Just a guess .... thanks for the information.
I wonder, why did you stop doing foam/bubbles with the vacuum method, where you mixed in bubbles like crazy and then did in the vacuum chamber while curing with UV like you did with the beer? Like you did in video 4N4eKHsTgsM That foam/bubble were much more realistic and I personally think it would go great with a tint of brown dye in the white foam, would make a great cola bubbles/foam, just much less of foam than beer that is very foamy. Its so sad you went away with that method. Why did you went away with that method and doing cotton instead? Easier?
Support/JOIN : th-cam.com/channels/aQRmy4Beww-riYiV44qjhg.htmljoin
My Short Guide about EPOXY RESIN: www.amazon.com/Short-Guide-about-EPOXY-RESIN-ebook/dp/B07ZWKS2PV
Bubble Removal Machine: amzn.to/3BxnNTe
Bonjour quel est le titre de la musique ? Merci
I'd like him
I love projects like these. They are what introduced me to this channel several years ago.
Cool thanks
Yes!!! I love your frozen moments pieces!!!
Awesome job!!! ❤️❤️❤️👍🏻👍🏻👍🏻
Awesome! Thank you!
That was the best spliff I’ve ever had. Thank you 🙏🏼
You are so creative. I would never thought that cotton could be used for that! Amazing!
Thank you!
Awesome resin creation it's so nostalgic brings back my childhood when this thing was a new trend back in the 90's everyone wanted this artwork in their homes. They were expensive back then but it's even more rare and pricey maybe you show this to soda companies so they can turn it into souvenirs you can make money with this. Lots of love and blessings.
I am amazed at the techniques you use. I'm equally amazed at the results!
😁👍
It's just like a meditation for me to watch your videos. And the background music! It's so calming! Thanks!
I'm so glad!
Very creative, Jedrek! That looks very refreshing!❤
Thank You Cynthia 😉😉
Very cool! Wow, all the steps it took to create it!
I love that last resin pour in was satisfying to see like your pouring soda in with all the bubbles :D
😊 thank you
You truly have the gift for creating. Thanks for the video and sharing your talent. Looking forward to next Friday
Thanks. Next week something entirely new
I really like the fact that you've used a lot of many of the different methods to get to the final product. For something that looked so easy to do, there were a lot of techniques and thoughs involved into this one. Nice results ! ❤
It's true. It was a complicated project. Thank you
I just love your videos. Great ideas that are realistic and unique.
Thanks
This is awesome. Looks real. Nice work as always!😊
Thank you very much!
I love this realistic pouring of Coke … brilliant project again -- thank you ❤
I now need to get a can of cola. Very impressive. Thank you for sharing this, and other, videos.
Thanks for watching!
That's awesome, you're very talented! ❤
Thank you so much!
You create the best things. I don't have the same supplies to do all that you do but it's fun to watch what you come up with.❤❤❤❤❤😊
Thank you so much!
Brilliant and realistic ❤
That looks like it was very refreshing and flavorful to make this week. 😊😊😊
It was!
the perfect internal view is my favorite part!
Cool
Muy bello su trabajo y laborioso.
Felicitaciones!!!!
Viewing from the caribbean amazing love all your projects 🥤🥤
As a big fan of Coca Cola, this video is very lovely! Thank you for your wonderful work👍👍
No problem Thanks 😉
Thank you, really great make, looks real. Have a great weekend x❤
Thank you! You too!
Thank you!!!
Delight again!
That is a Big HIT well done my friend
Thanks
That looks really neat :) The few bubbles that didn't come out don't even look out of place, they look like the fizz from the liquid or the drops of condensation on the sides of a cold can
Exactly, thanks
Hi Jedrek29t hope you are well. This is such a cute idea thank you
Thank you! You too!
Brilliant and beautiful. 💙🌻💙
Glad you think so!
So cool. I really like that one :)))
Marvelous! You must be channeling Claus Oldenberg!
He is a great artist
Love your work.
Glad to hear it!
Absolutely Stunning
Thank you so much!
That’s really cool!
Thanks
Lots of fun! Now I'm tempted to go back and figure out how many times you waited for something to dry. You must spend a week just waiting for stuff to harden on each of these projects.
Several days for each layer. Here was a lot of it
great idea jed, I like not reading the title of the video first so I have no idea what the hell you are going to do!
😁😁
It's been a long time since you showed up in my feed for some reason. I just started the video, but I'm very curious how you'll make this one! Thank you for the upload
Welcome back!
Hello my friend it’s been along time how are you doing? Thanks for all these years of content
All good, thanks
Liking these shorts! 💯
CraftDaddy says whaaat!?!?!? Bro!! That was the fastest I’ve ever seen ANYONE drink a good ole COKE !!! Great job 😎 bro
Thanks
Mmm. Looks delicious!
😁👍
Amazing
Very hard work osm wonderful great job 🙏🏻👑🔱😌😌😌💙💚🖤♥️
Thank you so much
Muy bueno el adminículo. Muchas gracias. ☻👍
Gracias
Amazing ❤
Thanks Michelle
That was brilliant i love it well done. And my favourite soda is lemonade what’s yours? Anyways I just want to say well done on that coca-cola resin art 🖼️ and keep up the great work your doing and see you next Friday yay😁👍.
My favorite is spite
@@jedrek29t really wow that’s the same thing I like nice😃😁👍.
Skiddle skidoodle this is better than a tower of noodle
Anyways nice! Thats amazing, and very cool design. Keep up the good work!
Thanks! Will do!
8:58--incredibly clever!
Thanks
This was really cool. I hope you get a contract with Coke and get rich. Very nice work.🙂
Thank You
Impressionante sensacional, um trabalho brilhante é um artesão de obras de arte!
Obrigado
My farourit channel ❤ i feel good when i watch and listen the song 😍😍 night snow 🤍🤍🤍
Glad to hear it
😲🤯😃😍🤩👌👌 super super super super super super super super super super super super idea
Thank you very much
Szép munka!👍🏻🤠
Brilliance just Brilliance a lot of planning n effort went into this. Could you do something with the Loch NESS MONSTER pls
😉😉
Спасибо за видео!!! Класс!!! 👍👍👍
Благодаря ви
Can you do the same type of thing but with Pepsi
I try
Verey nice! How about magician flying on the stage??
I love this project, with one exception. The Coke stream should be more translucent.
I agree with this
Nice🎉
Thanks
Very nice! Would it have been possible to place a cut part of a real drinking glass inside the epoxy? And adding a few transparent, glittering drops to the surface of the can to simulate a super-cooled soda can? Plus a few greater air bubbles on the downflowing softdrink spill?
True glass can be placed in resin. I try to make every element out of resin
I like the idea, but i want to add constructive comments:
- I can see your finger prints on cola stream
- cotton doens't look like cola foam at all. I saw you did foam more really look
- cola stream is very smooth. It would be better if it had water-like wrinkles.
In subsequent trials, all this can be changed. You never know what the end result will be. Experiment and show what came out of it
Nice❤
Thanks Maddie
Do you keep the molds you make?
Yes
I have always wondered about this.😊
This is pretty brilliant. Question: how do you manage to get rid of all of the bubbles in the final clear pour?
This is Let's Resin for deep casting. It gets rid of air bubbles by itself.
I like it. Not a huge fan of Coke Cola. But people love them and so cool. Wonder if you can make Pepsi too?
Cool idea
@@jedrek29t thank you
You are Amazing that all I can say.
Thank you so much Alexis
Wow👍😀❤
😉😊
This and the Zippo lighter project (Which i will do in time) are now my favorites mate ... you never fail to amaze me. Also is there any issue with toxic fumes. My partner was sitting next to my work at her easel and told me after a couple hours she felt odd??? Just a question ... thanks again.
I use Let's Resin. I don't feel any strange
@@jedrek29t Thanks mate ... I'm in Australia now after 9 years US Army including Vietnam (2/502 Infantry, 101st Airborne) I see Amazon sells it state side ... I'll check them out. Shipping is always a bitch. I get most of my gold leaf supplies from London in 6-7 days, but the USA is from 2-4 weeks. I don't know who Trump put in charge, but I'm sure the shipping times are loosing companies money ... Just a guess .... thanks for the information.
Great videos. Do you sell any of your works? If yes where can I buy them?
Thanks but not for sale
Great project. How did you get rid of bubbles?
This is Let's Resin for deep casting. It gets rid of air bubbles on its own. Links in the description
@@jedrek29t Thanks 😃
What’s the type of molding rubber you’re using? It seems lots more flexible than mine.
Top!!!!
Thanks
The coke being poured could have been lighter but other than that it’s very clever 👌🏻😊
How many size of this creation
How do you get the bobles out?
Let's Resin for deep casting gets rid of air bubbles on its own. Link in the description
Who made that music? It is so beautiful 👍🏻🇺🇸
Link in the description
❤❤❤❤❤
Aż bym się napił... 🍸🍾
Zdrówko 😉
Do you sell any of your creations? If you do where do I buy them?
Thanks but not for sale
Why is the can angled upward?
This is how physics works. A fluid always maintains a horizontal orientation
I lot of work on this one 😮
👍
I like the black marker line from the pen
👍
❤️
Is the song louder on this video?
no
wait... the can is tilted the wrong way? it's physics defying! 😮
Any liquid is horizontal
And this, boys and girls, is how microplastics are made.
Przywaliłeś sobie w kciuka?
Niestety
♥️👍
😉👍
The one time it would be okay for there to be bubbles in your resin
Exactly
The can should be angled down not up when pouring
Noo. Any liquid is horizontal
Not if it's full.
Oh my god...Your finger is damaged again. Finger, get cured! Until next Friday =) Greetings from Russia!
All is well now. Thanks
Cool Resin Art and Imma1st
👍
I don’t think fluids behave like this..
I wonder, why did you stop doing foam/bubbles with the vacuum method, where you mixed in bubbles like crazy and then did in the vacuum chamber while curing with UV like you did with the beer?
Like you did in video 4N4eKHsTgsM
That foam/bubble were much more realistic and I personally think it would go great with a tint of brown dye in the white foam, would make a great cola bubbles/foam, just much less of foam than beer that is very foamy. Its so sad you went away with that method. Why did you went away with that method and doing cotton instead? Easier?
Each time I try a different idea
Слишком нерентабельно 😒
Wow idk how people do it!!!! What happened to ur thumb bro
All is well now. Thank you
@@jedrek29t to turn a nail, a BANG then some choice words a good yelp too… lol
This is real masterpiece ⚡👑😌
.
,
.
,
.
,
.
,
.
,
Or video upload me pls 🙏🏻👑🙏🏻
Thanks
Nie pij tej *trucizny* ,