Concrete Block Repair Using Sakrete Pro Mix (Making Money!)
ฝัง
- เผยแพร่เมื่อ 6 ก.ค. 2024
- #EverythingAboutConcrete #MikeDayConcrete #SakreteProMix
This video will show you how to repair a hole in concrete blocks using Sakrete's Pro Mix all purpose cement mix.
How to repair concrete blocks.
How to fix broken concrete blocks.
This repair mix is good for all types of concrete repairs. Watch as I fix this vertical block with a big hole in it.
LEARN FROM ME - PRIVATE MEMBERSHIP AREA:
www.theconcreteunderground.co...
GARAGE FLOOR EPOXY FLAKE COATING COURSE:
www.theconcreteunderground.co...
MY STAMPED CONCRETE COURSE:
mike-day.mykajabi.com/offers/...
MY CONCRETE SLAB COURSE:
mike-day.mykajabi.com/pl/79570
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykajabi.com/offers/...
GARAGE EPOXY FLOOR COATING COURSE:
mike-day.mykajabi.com/offers/...
VISIT MY WEBSITE:
www.everything-about-concrete...
USE THE SAME TOOLS I DO:
36" MBW POWER TROWEL:
imp.i284638.net/oeRMmn
ScreeDemon Gas Powered Vibratory Screed:
imp.i284638.net/4ZKEL
Screedemon Battery Powered Vibratory Screed:
imp.i284638.net/LzdBo
14' Screed Board for ScreeDemon:
imp.i284638.net/QOPDZM
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything-about-concrete...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.com/form/44/2003...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
everything_...
Follow my Facebook Page:
/ everythingaboutconcrete - แนวปฏิบัติและการใช้ชีวิต
Thank you for showing how to do this. It's a much needed repair in many older homes, especially from the outside where there was no water barrier prior to a certain year.
Thanks taking the time to create such a great video.
great video mike ,nice work
Glad you enjoyed it
Really nice!
Awesome thank you i have an area ike this and i cant add block, fantastic work 😊
Should you use a wire mesh if it's at least an inch deep
Nice Video 😊
Was that from ice popping or fork lift, because all that block in the area (white) is showing water damage. Here the building inspectors will jump all over that, make fix the water issue and replace all the blocks.
Excelente trabajo 👌🏻💯💯🧱🧱🧱
Awesome, thanks!
I do these patches all the time in warehouses from the forklift blades running into them . Nice job Mike
Thanks Myron.
You use these products? How much you charge?
Impressive.
this is a cool project for your channel Mike!!! you know i've been a long long long time fan and sub on both my UTUBE accounts. I say to all of you ... don't do that music over the work. Voice over or SPEAK to the project. The music is not a strength. You speaking over what people are seeing is the STRENGTH. not this general music. Hope you guys all have a perfect weekend. One of my fav channels.
I agree with this guy … don’t visit the channel for genetic music
Your voice over should be there
What’s general to everyone is specific to nobody
Love this channel always epic projects too
Thanks for the feedback, much appreciated!
Fun little job.
Good money maker too.
How much would you charge for this
I always watch videos so I can fucking read through the whole goddamn thing
That patch certainly isn't going anywhere, especially with them screws in there. But as a mason, I would just throw some type S mortar in there, squeeze it up against the edges with my bricklaying trowel and then dress it up to look like block. Do that by rubbing it with a piece of block after it sets up a bit. Done in 10 minutes, start to finish.
A real mason would just clean out what you can and lay 4" ' block back in there or 3" or what ever fits. Not slap a bunch of whatever in there. So much easier and quicker.
@@63flight I've been doing 'all kinds' of masonry work since 1985 (Brick, Block, and Stone. Residential, Commercial, and Industrial. Big Jobs and Small Jobs). If your dumb ass wants to pay to replace the block, then the block can be replaced. But why do that when I (or any mason) can make it look like a real block in a matter of minutes.?. Most 'normal people' would choose the latter.. Mike here is a concrete man, and a very good one at that, And I Appreciate Him Very Much. But I can tell by this patch, he's not much of block mason, and/or maybe he is trying to sell this product.?.. I'm Not criticizing anybody or anything, just being honest with my thoughts from my perspective. Which is the purpose of 'comments'. ... And Yes, I would 'slap' that b*tch in there like nobody's business!😅
@@bonanzatime 🤣🤣🤣🤣🤣🤣
Mike, maybe a bit of 'light' on the subject would help us all...you included?
I know, it could have been lit up better. Thanks
Can this be used to resurface the concrete wall?
Use Sakrete surface bonding cement to resurface a wall
Gloves would help
nice job. But like Mike Haddock says "if you want to make it stick, you have to get it wet first."
Mike's the Boss, he knows!
Wouldn’t recommend using the impact drill on the tap cons
And that's how you do a quick repair of damage caused by the fork on a forklift.
You could have cut the face off a new block then cut out the mortar bed and head joints and damaged block replaced with the new one and tuck pointed it back in.
I could have, but that's no fun.
Too much work for the cut out , most people don’t want to pay simple patch will do the job
@@benzoh28 not if you know what you're doing you get what you pay for.
That wall is crumbling because it’s under lateral pressure from water. While I applaud the repair, this is a bandage on a bullet hole.
No gloves
His skin must be made of steel… at least on his hands.
Just no
Stick to the flat work.
Great techniques but, I don’t think I could afford the bill. So instead, I’d put a full size, cut-out, dart board figure of ‘O-Biden’, in front of the damaged area. Naw, I’d pay the bill first. Know what I mean! Again, great video!
,,l,,
@@rickfitzgerald4426 i,,,(Here’s the feather, the bird is too good for you)