SpeedSF Black Friday Buttonwillow day - 11/26/2021 Nice crisp PB weather and sticker RC1s make for some solid times Track: Tea Thyme - Damu the Fudgemonk Chapters: 0:00 - Intro 0:24 - Lap 2:35 - Outro
Thanks man! I messed up bus stop pretty bad too, there's probably a half second in there alone. Sadly at HPDE you basically get 2-3 clean laps when the track is fastest, so I'll take it
At what point did it make sense to move to a square setup? Also, I’m really digging the pedal cam. Makes me think a little more about throttle position through the corner. It looks like T2 is just stab the throttle and catch the slide if it steps out.
I've been looking into a square setup as well. Seems to be the go to setup if you plan on tracking. 17x9 with 255s are the most common setups I could find. Depending on the offset it would require a fender roll and/or pull. Plus gives you the ability to rotate tires
Square is the fastest and most enjoyable form of the car IMO. I went square as soon as I got coilovers. Glad you like it! It’s an extra camera to deal with but I think it adds something to the videos. For buttonhook, get the car pointed in the right direction (usually nearly parallel to the curb) and roll on the gas as soon as possible - probably sooner than you think.
I am, but I had them adjusted poorly on this day so the car was bouncing everywhere. The rates are 14k/12k with karcepts front bar and miata rear bar. I got them secondhand but they were built by PSI.
I got a really solid metal GoPro roll bar mount and turned off image stabilization/hypersmooth so the view doesn’t try to resist the body motion of the car. Spot exposure set on the track, and exposure set to -.5 or -1 stop (I forget). I also do some basic video processing to bring down the highlights (track) and lift the shadows (interior).
Your foot work is amazing 🙏
Fancy footwork
Holy shit sliding around at 100 + mph.
Thats why one needs a roll bar.
Indeed. Did you get one yet?
Nicely done. Great car control skills. Thanks for sharing.
Flyin'
ballsy! good lap! 57's without that slide out of Sunset.
Thanks man! I messed up bus stop pretty bad too, there's probably a half second in there alone. Sadly at HPDE you basically get 2-3 clean laps when the track is fastest, so I'll take it
Nice lap/driving! ..I have an AP1 and that is harder than it looks to put down a lap like that. Awesome time!
nice. very enjoyable to watch. gotta love a non aero s2000. total drivers car.
also, would you be willing to share your aim data for this lap?
Almost like perfect lap
At what point did it make sense to move to a square setup?
Also, I’m really digging the pedal cam. Makes me think a little more about throttle position through the corner.
It looks like T2 is just stab the throttle and catch the slide if it steps out.
I've been looking into a square setup as well. Seems to be the go to setup if you plan on tracking. 17x9 with 255s are the most common setups I could find. Depending on the offset it would require a fender roll and/or pull. Plus gives you the ability to rotate tires
Square is the fastest and most enjoyable form of the car IMO. I went square as soon as I got coilovers.
Glad you like it! It’s an extra camera to deal with but I think it adds something to the videos.
For buttonhook, get the car pointed in the right direction (usually nearly parallel to the curb) and roll on the gas as soon as possible - probably sooner than you think.
@@W33lhop How are you mounting the pedal cam?
I know you said you’re running TTX - what spring rates? Is this the urge/psi kit?
I am, but I had them adjusted poorly on this day so the car was bouncing everywhere. The rates are 14k/12k with karcepts front bar and miata rear bar. I got them secondhand but they were built by PSI.
Looked great to me (beginner here), can you share your camera settings?
I got a really solid metal GoPro roll bar mount and turned off image stabilization/hypersmooth so the view doesn’t try to resist the body motion of the car. Spot exposure set on the track, and exposure set to -.5 or -1 stop (I forget). I also do some basic video processing to bring down the highlights (track) and lift the shadows (interior).
Great driving! What are the brakes?
Thanks! It’s got an AP 5000R kit with DS1.11 pads up front, rears are stock with project mu club racers.
ap1 or ap2 flywheel?
Is it less slippy-slidey with aero/big wang?
What a horrible track...