Before clicking on this video I thought this would be some sort of click bait concept bike😂until I did click and the camera started to move, one of the craziest buells I’ve ever seen💪🏼
I don't think they horrible to look at, I own Buell Fireolt XB12R, and I regularly get compliments from drivers in cars at stop sign and traffic lights telling me what a nice looking bike it is.
Absolutely an amazing Job. This is the closest rationalization I have seen to what I imagen in my head . I have the same Buell Modell. Thanks for sharing!!!!
Awesome makeover but you’ve kept the stock exhaust on it! It sounds like a sewing machine. You need a custom exhaust to give it the V twin rumble it deserves!
Your Buell looks like very cool and clean👌 if you wants to clean the rear break pump... looking at the Brembo-pump for the KTM 450 EXC it looks like pretty.
If you are looking for parts for chain conversion for standard rear wheel Free Spirits did a Buell XB chain conversion kit before and I used some parts from their kit for my conversion but I do not see the kit on their website anymore. The most important part of the chain conversion is the Chain Idler and maybe Free Spirits Chain Idler can be found on eBay. The sprockets can be ordered from different places. If you can make front sprocket drawing or CAD model these guys can fabricate custom front sprocket for you www.superiorsprockets.com (they did front sprocket with offset for 240 wheel for me), maybe you can find a Harley Davidson Sportster front sprockets for 520 chain (Free Spirits Chain Idler is for 520 chain) can fit Buell XB, but check offset and amount of teeth you need. Rear sprocket is the easiest part, for instance Vortex makes rear sprockets for Buell XB www.vortexracing.com/product-category/rear-sprockets/ and you can buy those everywhere (Amazon, eBay, etc.), or for instance it can be custom made here rebelgears.com, again figure out the sizes you need. Chain can be bought everywhere (Amazon, eBay, etc.), just figure out the length and width of the chain you need and tools to trim and to install the chain. You may also can try to contact these guys about chain conversion www.twinmotorcycles.nl/webshop/artikel.asp?mc=1&aid=1770&cid=0&s=
I did not calculate it and did not capture the prices carefully. If I remember correct the most expensive pars are the 3D printed seat (maybe around $1500) and the CNC machined sub-frame parts (maybe $1000). Another miscellaneous parts are maybe $1000-2000. But the most expensive portion of the project is the time I spent on it (If I would do this for living it would be my full time work for maybe 6-9 months and $40000-60000 of labor). Basically it is cheaper to do your regular work overtime and buy any factory produced motorcycle you like the most on the money you earned working overtime.
I've got a pristine 2019 MV Agusta "Brutale" 800 RC (#097 of only 350 ever built) with Clean Texas Title that I would trade you dead-even for that bike.
Yes, it is flat on the back. Yes, you can use 3M adhesive to mount it. I mounted the gauge display on the bracket with flat face using 3M double sided adhesive tape www.customfighters.com/threads/2009-buell-xb12scg-custom-ii.137710/#post-3142278
I own the 2005 model year of Buell xb12s. I want to change the actuator to a chain. I wonder if buying a transmission sprocket drive kit for the sportster can drive on a chain like your motorcycle.
I am not familiar with sportster sprocket drive kit, so I do not know if it will work. One of the important part of the chain conversion is chain tensioner and I'm sure the sportster sprocket drive kit does not have chain tensioner. The only plug and play chain conversion kit designed specifically for Buell XB I know is Free Spirits Buell XB chain conversion kit and this is the one I used as the base for my modification.
wow thats a nice looking Buell. Thinking about buying a XB12S and mod it abit not as extreme as you but a LSL headlight and clipons and a seatriser will do a lot on the looks. If i change to a R triple clamp do i need to change the instrument cluster aswell?
Real love what you did ! Followed your first build on customfighters and noticed a cad of the frame, would it possible for you to share this CAD ? I'm designing, and then will 3D print a front and tankt/seat assembly and it would spare me loads of time ! Thanks
Thanks! Yes, I'm planning to share the CAD model of whole motorcycle later when I will have time to prepare the files. I'm planning to post it in my thread.
@@illla this build of yours is so underrated! I have looked in to some of the internet pages with your stuff.! You are very skilled craftsmen. Is there a chance to still get the files ?
@@brianbak6405 it looks like Google deleted my files. Here is the CAD model but without the brackets drawings, just 3D geometry grabcad.com/library/buell-xb-12-scg-custom-ii-1
@@illla is there a chance to buy the files like stl format for print ? I have a printer. But I am not at talented like you.’ I also saw all the stuff you have done with electric for rear light.! It’s amazing well constructed and thought out.!
May I ask how did you replace the battery and the wiring of the bike? If you have any photos of your great job, can you sand them to this email addres? lameridiana.anacapri@gmail.com Thanks in advance
@@giuseppesavastano73 the link to the thralead with pictures including wiring harness building is in the video description. You can find there all the details www.customfighters.com/threads/2009-buell-xb12scg-custom-ii.137710/
Bike looks awesome, does not sound awesome though lol. Have seen many buell videos and they can sound great but idk if this one is more stockish or what but doesnt have that mean vtwin tone it needs.
Funny how the swingarm is set so wide that you can stuff a 240 without modification. All you need is a chain and sprocket set with a sproket tensioner, and a wider rim. But how does it handle with that 240 rear, is it as bad as they claim it is?
Thanks. The swing arm is stock, 240 wheel fits it with little modification. I sent stock Buell XB rear wheel to Kosman Specialties and they welded up the rim to 240 mm width facebook.com/kosman.specialties . For chain conversion I use modified Free Spirit tensioner. I also designed rear sprocket spacer, parts for tensioner modification and sprockets and ordered parts in different machine shops. You can find some details here www.customfighters.com/forums/showthread.php?t=105730
Other then the shape of that seat it's not bad all I feel like 1 it's to high 2 it's to short and 3 that odd cup would make that a nut cracker on a hard break situation
I do not produce the parts. Check the link in the description to see what making the seat involves. All the details are there including the CAD models I shared and the fabrication process.
Sorry for my question, I reading in your comments that the sead is on 3d-printing? What's the material for this... metall or plastic? And what's your say about the 240 wheel? I think it's looks like porn and good on drag but handling on curves I feeling bad
Really!? Oh it's great job👌my 3d-printer is not so powerfull. I like the look, so short and clean ... resembles the original. Many others are too extreme or the shapes do not match the Xb (ProjektX / Hellbander)
I still live in Seattle. I'm pretty busy so I'm not sure I can provide active guidance. You can create your threat on badweatherbikers.com forum in "XBoard" about your build and get help there. I visit this forum sometimes too and I can answer your questions there too. The forum is the best way to keep your project tracking and documenting so you can get help the most efficient way. You have to decide how deep you wish to customize your motorcycle because of it is not only time consuming, but also requires a lot of money to be put into the project. Sometimes It is just cheaper to buy a high end motorcycle you like in it's stock form. For instance if I would totally destroyed my Buell I would not buy a new one to customize it again, even I already knew how it should be done, I would just buy something different and would not customize it at all. Usually when people ask help to customize their motorcycle/car they do not have skills, tools, knowledge, time and enough passion to do this work at all and this is pretty big issue too besides the fact it can be unsafe. Buells are also quite quirky motorcycles and customizing them may turn the project to a nightmare if you are not mechanically inclined or if you do not know how to troubleshoot it. Even I do not know completely how to fix some Buell issues other way than just replacing a bunch of parts hoping it will fix the problem, I already fixed some Buell issues this way and it is not the cheap way to get it works properly.
@@teambennett3060 I did the mods. The seat is 3D printed part with CNC machined aluminum subframe. The swingarm is stock Buell XB swingarm. The details are here www.customfighters.com/threads/2009-buell-xb12scg-custom-ii.137710/
@@illla would you be willing to broker them to do that seat or one simpler for me? or would you be willing to produce the same or similar seat for me at your cost and markup? Please let me know.
@@BellaFPSF Unfortunately I can not do this. There is a lot of time consuming work involved in it and I do not do money on this work, this is just a single hobby project. The 3D printed seat is not the difficult part. You have to CNC machine the new seat subframe parts, you have to 3D print not only the seat but also new electric components housing located inside the airbox and assemble it, and you have to completely rebuild the wiring harness. If you can do this work by yourself you can read my thread carefully (see the link in the description), I shared the process details and the CAD models, so you can contact the companies who can do those parts for you (I posted all the links of those companies in my thread) and start the work.
@@illla I completely understand. This is why your bike is so special. It will most certainly always be one of a kind. You are very talented. Thank you for all of the transparency on this post. Most would not share this detail.
Some parts for my conversion (the rear sprocket and some tensioner parts) are from the the Free Spirit chain conversion kit. But they do not produce it anymore. www.twinmotorcycles.nl/webshop/artikel.asp?mc=1&cid=163&aid=2456&title=Buell-XB-chain-race-conversion-kit The front sprocket is custom sprocket with offset produced by superiorsprockets.com on my specifications (I do not know if they are still in business though, their website does not work anymore).
The rear wheel needs widening (machining to trim and welding new flanges), rear sprocket spacer, custom front sprocket, custom chain tensioner and chain.
The subframe is CNC machined aluminum and stainless steel parts structure. You can not see the subframe on this video, the subframe is inside the seat (seat slides over the subframe). There are some 3D printed components attached to the subframe but those are not structural parts of the subframe. The seat is 3D printed part.
@@angrygnome4779 I designed the seat and another seat components and ordered them to be fabricated in different prototyping companies. I just designed the parts and assembled them.
![PASULOL รามเกียรติ์ ตอนที่ 4 นนทกพบรัก [Ramakien Ep.4: Nonthok in love]](http://i.ytimg.com/vi/tMUQgmZzf_A/mqdefault.jpg)
Before clicking on this video I thought this would be some sort of click bait concept bike😂until I did click and the camera started to move, one of the craziest buells I’ve ever seen💪🏼
I don't think they horrible to look at, I own Buell Fireolt XB12R, and I regularly get compliments from drivers in cars at stop sign and traffic lights telling me what a nice looking bike it is.
Gorgeous!!!,i want one like that!!!
I love my Buell Xb more then any bike I’ve owned. But I can’t bring myself to do anything else except for tail delete. It’s just so perfect
I dig the headlight, seat and rear tire look a bit out of proportion. what a beast!
That's what perfect looks like. Fantastic bike.
Absolutely an amazing Job. This is the closest rationalization I have seen to what I imagen in my head . I have the same Buell Modell. Thanks for sharing!!!!
Always wanted one. Waited to long and they stopped making them.
Hopefully I get a “second chance” when/if Harley releases the Bronx.
I saw this online, so glad to see it in a video. Those are xb goals right there.
Awesome makeover but you’ve kept the stock exhaust on it! It sounds like a sewing machine. You need a custom exhaust to give it the V twin rumble it deserves!
Really seriously build. A real joy to watch. I lift my hat for you.
Looks like it should be in the next fast and furious movie, with Jason Stratham riding it
Nice touch going with the chain drive. Clean gauge display too
Let's be honest the Buell motorcycles are horrible to look at but what you've done to that bike is a work of art. U did a great job.
Your Buell looks like very cool and clean👌 if you wants to clean the rear break pump... looking at the Brembo-pump for the KTM 450 EXC it looks like pretty.
BEAUTIFUL ORIGINAL COSTUM BIKE 👍🏻
Damn. Now I miss my Firebolt...
ride with pride in to the future mate.....
Simply awesome build. Respect for sharing your mods with others here. Earned another sub.🤘
Omg so sweet, perfect.
Fucking sick! Love it! Hope its still around
охуенный!!! в европе таких нет! 👍👍👍
The best American bike buell
Badass Build! 👍👍
Sick! Bad ass Buell ! Great build!!
Hey man I love the build who made the seat conversation.
lmk when you're ready to sell this, very nice.
I love your Bike man..
Love it ❤
Sick bike! Congrats
love it! cool seat!
Nice work dude !
Love my xb12xt
Beauty. Well done sir.
That seat though 😍😍
Perfect!!!! 👌
I have xb12r where do they sell the chain and sprocket swap outs now I can’t find them
If you are looking for parts for chain conversion for standard rear wheel Free Spirits did a Buell XB chain conversion kit before and I used some parts from their kit for my conversion but I do not see the kit on their website anymore. The most important part of the chain conversion is the Chain Idler and maybe Free Spirits Chain Idler can be found on eBay. The sprockets can be ordered from different places. If you can make front sprocket drawing or CAD model these guys can fabricate custom front sprocket for you www.superiorsprockets.com (they did front sprocket with offset for 240 wheel for me), maybe you can find a Harley Davidson Sportster front sprockets for 520 chain (Free Spirits Chain Idler is for 520 chain) can fit Buell XB, but check offset and amount of teeth you need. Rear sprocket is the easiest part, for instance Vortex makes rear sprockets for Buell XB www.vortexracing.com/product-category/rear-sprockets/ and you can buy those everywhere (Amazon, eBay, etc.), or for instance it can be custom made here rebelgears.com, again figure out the sizes you need. Chain can be bought everywhere (Amazon, eBay, etc.), just figure out the length and width of the chain you need and tools to trim and to install the chain.
You may also can try to contact these guys about chain conversion www.twinmotorcycles.nl/webshop/artikel.asp?mc=1&aid=1770&cid=0&s=
Very cool! Where the BATTERY?
Thanks. The battery in inside the airbox.
@@illla спрос
Beautiful 😍😍😍😍😍
excellent work, I want one me too !!!
Uuooowww a Buell Mai’s top do mundo…..
Beautiful!!
Nice bike♥️
Only hting different I would do is exhaust, still sounds like vtwin sewing machine.
A price break down would be interesting.
I did not calculate it and did not capture the prices carefully. If I remember correct the most expensive pars are the 3D printed seat (maybe around $1500) and the CNC machined sub-frame parts (maybe $1000). Another miscellaneous parts are maybe $1000-2000. But the most expensive portion of the project is the time I spent on it (If I would do this for living it would be my full time work for maybe 6-9 months and $40000-60000 of labor). Basically it is cheaper to do your regular work overtime and buy any factory produced motorcycle you like the most on the money you earned working overtime.
Way too pretty for that stock exhaust. What's the digital display on the throttle side?
This is digital fuel pressure gauge display.
I've got a pristine 2019 MV Agusta "Brutale" 800 RC (#097 of only 350 ever built) with Clean Texas Title that I would trade you dead-even for that bike.
Thanks for the offer but I'm planning to keep it for now
@@illla LOL. I would too... 8^)
Came here to see the fuel pressure gauge. Is it flat on the back? Can I use 3M tape to mount?
Thanks and nice ride.
Yes, it is flat on the back. Yes, you can use 3M adhesive to mount it. I mounted the gauge display on the bracket with flat face using 3M double sided adhesive tape www.customfighters.com/threads/2009-buell-xb12scg-custom-ii.137710/#post-3142278
I own the 2005 model year of Buell xb12s. I want to change the actuator to a chain.
I wonder if buying a transmission sprocket drive kit for the sportster can drive on a chain like your motorcycle.
I am not familiar with sportster sprocket drive kit, so I do not know if it will work. One of the important part of the chain conversion is chain tensioner and I'm sure the sportster sprocket drive kit does not have chain tensioner. The only plug and play chain conversion kit designed specifically for Buell XB I know is Free Spirits Buell XB chain conversion kit and this is the one I used as the base for my modification.
wow thats a nice looking Buell. Thinking about buying a XB12S and mod it abit not as extreme as you but a LSL headlight and clipons and a seatriser will do a lot on the looks. If i change to a R triple clamp do i need to change the instrument cluster aswell?
Love it ! great job. One question. The seat is printed in 3D ?
Yes it is
@@illla Ok and it's for sale with subframe ?
@@KIKOUSPEED it is not for sale
Real love what you did ! Followed your first build on customfighters and noticed a cad of the frame, would it possible for you to share this CAD ? I'm designing, and then will 3D print a front and tankt/seat assembly and it would spare me loads of time ! Thanks
Thanks! Yes, I'm planning to share the CAD model of whole motorcycle later when I will have time to prepare the files. I'm planning to post it in my thread.
Hey, I have shared the CAD model, see my post here www.customfighters.com/forums/showpost.php?p=3143606&postcount=57
@@illla this build of yours is so underrated! I have looked in to some of the internet pages with your stuff.! You are very skilled craftsmen. Is there a chance to still get the files ?
@@brianbak6405 it looks like Google deleted my files. Here is the CAD model but without the brackets drawings, just 3D geometry grabcad.com/library/buell-xb-12-scg-custom-ii-1
@@illla is there a chance to buy the files like stl format for print ? I have a printer. But I am not at talented like you.’ I also saw all the stuff you have done with electric for rear light.! It’s amazing well constructed and thought out.!
Awesome build Buell, do you still have the BUELL
Thanks. I do.
Divinal 🙏
Absolutely stunning!!! Can you customize my buell xb 12?!?
Thanks. I actually do not customize motorcycles, this is just one time project.
May I ask how did you replace the battery and the wiring of the bike? If you have any photos of your great job, can you sand them to this email addres? lameridiana.anacapri@gmail.com
Thanks in advance
@@giuseppesavastano73 the link to the thralead with pictures including wiring harness building is in the video description. You can find there all the details www.customfighters.com/threads/2009-buell-xb12scg-custom-ii.137710/
@@illla thank you
Ficou maravilhosa 😍😍😍😍
Love the overall build. Super sick. I really like those electronics. Are those made for the bike or something that had to be modified?
The speedometer is for motorcycle, it is Motogadget product.
That looks phat as, I've got an xb12 pimped as a night rod look, how do you lose the frame under seat? That really makes it pop, well done bro.
Thanks. I designed new frame attached to the rear shock upper mount point and to the upper mounts of the original frame.
Illa Your a gun dude👌🏼
It’s amazing!! Can you sell the tail kit? It’s possible ?
I can't. There is a lot of parts and work involved. But I shared the CAD files and information how it was made so you can reproduce it.
Flex.
linda!
hello all good friend. This headlight you put on Buell and what model of motorcycle?
I’m wondering the same thing
LSL Urban Headlight MT03
Bike looks awesome, does not sound awesome though lol. Have seen many buell videos and they can sound great but idk if this one is more stockish or what but doesnt have that mean vtwin tone it needs.
Great, great, great job. Congrats. How it feels 240rear wheel??
It feels fine, I have no ussues with it.
@@illla thanks. Enjoy.
Funny how the swingarm is set so wide that you can stuff a 240 without modification. All you need is a chain and sprocket set with a sproket tensioner, and a wider rim. But how does it handle with that 240 rear, is it as bad as they claim it is?
It handles OK, I have no issues with it.
Very very cool style Illa! Great Seat - i have never seen before...your own design? Greetings from Germany, Frank
Thanks Frank. Detailed design is my own. Owerall style is inspired by another custom Buells.
Where can I buy thiss body???? 😍😍😍
Unfortunately nowhere. But you can build it from scratch since the parts CAD models and building process are shared.
One of the nicest buells I've seen. Where did you find the 240 wheel and swing arm conversion?
Thanks. The swing arm is stock, 240 wheel fits it with little modification. I sent stock Buell XB rear wheel to Kosman Specialties and they welded up the rim to 240 mm width facebook.com/kosman.specialties . For chain conversion I use modified Free Spirit tensioner. I also designed rear sprocket spacer, parts for tensioner modification and sprockets and ordered parts in different machine shops. You can find some details here www.customfighters.com/forums/showthread.php?t=105730
@@illla wow!! that's insane! so beautiful modifications! ciao!
Other then the shape of that seat it's not bad all I feel like 1 it's to high 2 it's to short and 3 that odd cup would make that a nut cracker on a hard break situation
Buy a Buell and I really liked your project, what is the possibility of me making a bench like yours, would you sell the project or the parts?
I do not produce the parts. Check the link in the description to see what making the seat involves. All the details are there including the CAD models I shared and the fabrication process.
Do you still have this bike? I recently moved to Washington, but went from XB9S to 1125CR
I do
@@illla just rode over Snoqualmie Pass last weekend to get to Lynden...not looking forward to trying to make it back... LOL Snow!
@@justinm916 there is snow this time of year around Seattle. There is no snow in Seattle almost all year round though.
Sorry for my question,
I reading in your comments that the sead is on 3d-printing? What's the material for this... metall or plastic?
And what's your say about the 240 wheel? I think it's looks like porn and good on drag but handling on curves I feeling bad
The 3D printed seat material is nylon. The 3D printer is HP MJF. The seat has CNC machined aluminum subframe. 240 wheel handles OK, no issues at all.
Really!? Oh it's great job👌my 3d-printer is not so powerfull.
I like the look, so short and clean ... resembles the original. Many others are too extreme or the shapes do not match the Xb (ProjektX / Hellbander)
Very cool! Which bike did the headlight come from?
The headlight is LSL Urban
@@illla thanks a lot!
Pnw work great job man I visit that park frequently wanna sell it ?
Thanks. I am not planning to sell it yet.
Do you still live in Seattle? I live here and would love / appreciate having some help / guidance building a custom buell as well
I still live in Seattle. I'm pretty busy so I'm not sure I can provide active guidance. You can create your threat on badweatherbikers.com forum in "XBoard" about your build and get help there. I visit this forum sometimes too and I can answer your questions there too. The forum is the best way to keep your project tracking and documenting so you can get help the most efficient way.
You have to decide how deep you wish to customize your motorcycle because of it is not only time consuming, but also requires a lot of money to be put into the project. Sometimes It is just cheaper to buy a high end motorcycle you like in it's stock form. For instance if I would totally destroyed my Buell I would not buy a new one to customize it again, even I already knew how it should be done, I would just buy something different and would not customize it at all.
Usually when people ask help to customize their motorcycle/car they do not have skills, tools, knowledge, time and enough passion to do this work at all and this is pretty big issue too besides the fact it can be unsafe.
Buells are also quite quirky motorcycles and customizing them may turn the project to a nightmare if you are not mechanically inclined or if you do not know how to troubleshoot it. Even I do not know completely how to fix some Buell issues other way than just replacing a bunch of parts hoping it will fix the problem, I already fixed some Buell issues this way and it is not the cheap way to get it works properly.
I don't really understand the forward foot pegs
Those allow to stretch and rest the legs during long distance riding. This is highway pegs.
That custom Seat is amazing. did you design the seat or purchased it from somewhere?
Thanks! I designed the seat, check the link in the description.
Who owns this bike? It's dope. I want it.
Me. Thanks.
@@illla did you do the mods? How did you do the seat and was the swing are something you ordered or fabricated?
@@teambennett3060 I did the mods. The seat is 3D printed part with CNC machined aluminum subframe. The swingarm is stock Buell XB swingarm. The details are here www.customfighters.com/threads/2009-buell-xb12scg-custom-ii.137710/
@@illla Thank you, Super sick.
How did u make that beautiful seat
The seat is HP multi jet fusion 3D printed part I designed and ordered to print a prototyping company th-cam.com/video/VXntl3ff5tc/w-d-xo.html
Where’d you get the seat? Fire bike by the way 🔥
I designed the seat in CAD program and Stratasys prototyping company 3D Printed it for me out of nylon on HP MJF 3D Printer.
@@illla would you be willing to broker them to do that seat or one simpler for me? or would you be willing to produce the same or similar seat for me at your cost and markup? Please let me know.
@@BellaFPSF Unfortunately I can not do this. There is a lot of time consuming work involved in it and I do not do money on this work, this is just a single hobby project. The 3D printed seat is not the difficult part. You have to CNC machine the new seat subframe parts, you have to 3D print not only the seat but also new electric components housing located inside the airbox and assemble it, and you have to completely rebuild the wiring harness. If you can do this work by yourself you can read my thread carefully (see the link in the description), I shared the process details and the CAD models, so you can contact the companies who can do those parts for you (I posted all the links of those companies in my thread) and start the work.
@@illla I completely understand. This is why your bike is so special. It will most certainly always be one of a kind. You are very talented. Thank you for all of the transparency on this post. Most would not share this detail.
Info on the chain conversion? I would really like to chain convert mine
Some parts for my conversion (the rear sprocket and some tensioner parts) are from the the Free Spirit chain conversion kit. But they do not produce it anymore.
www.twinmotorcycles.nl/webshop/artikel.asp?mc=1&cid=163&aid=2456&title=Buell-XB-chain-race-conversion-kit
The front sprocket is custom sprocket with offset produced by superiorsprockets.com on my specifications (I do not know if they are still in business though, their website does not work anymore).
is this bike too tall for some one that is 5 6 with 29 inch inseam?
This motorcycle is not tall for 5 6 person (Buell XB Scg version). Scg version has lover suspension and it fits good for 5 6 person.
Where did you get the tail unit? Subframe did you make it yourself?
Hi, do the wheels need machining? Or does a different bike fit?
The rear wheel needs widening (machining to trim and welding new flanges), rear sprocket spacer, custom front sprocket, custom chain tensioner and chain.
Is that subframe 3dprinted?
The subframe is CNC machined aluminum and stainless steel parts structure. You can not see the subframe on this video, the subframe is inside the seat (seat slides over the subframe). There are some 3D printed components attached to the subframe but those are not structural parts of the subframe. The seat is 3D printed part.
Did you make the seat or is it a purchased item? Looking for something like that on my 1125cr
@@angrygnome4779 I designed the seat and another seat components and ordered them to be fabricated in different prototyping companies. I just designed the parts and assembled them.
What motorcycle is this headlight from or can you tell me where you bought it, thanks.=)
Фара LSL Urban Headlight. Это фара от Ямаха MT-03 2006-2013 годов с креплением от LSL. Купил на Ebay.
@@illlaбольшое спасибо за ответ=)
Hello really nice looking bike is for sale??
Thanks. It is not for sale.
Ciao, la vendi?
Dove hai posizionato la batteria?
Inside the airbox
How fat is that tire!?
240 mm
Спрос
I’d buy this rite now damn it
That seat looks ridiculous 🤣😂🤣, spoils an otherwise great bike 😎. 👽
Still have this bike?
I do
@@illla would you sell it?
@@letscheckitout1985 not yet
@@illla ok no sweat enjoy!!