Snapmaker 2.0 A350T - Part 2: 3D printing inside Snapmaker Enclosure
ฝัง
- เผยแพร่เมื่อ 18 มิ.ย. 2024
- In this part 2, I am assembling the Snapmaker Enclosure and I will test it with 3D printing on A350T. According to specifications, the enclosure will reduce the noise, give warmer environment and capture toxic fumes (advantages if we want to 3D print ABS parts).
Snapmaker Official Store: bit.ly/3hBZD0t
Part 1 (A350T assembling, 3D printing): • A premium 3-in-1 solut...
In part 3 I will test it with laser- and CNC tool heads.
Contents:
0:00 Introduction
2:00 Assembling
5:26 Cura settings
5:45 Preparing for 3D printing
6:03 Calibration cube
6:25 About spool holder
7:27 3D printing, bed heating
8:12 Noise measuring
9:41 Spiral (vase) mode printing
11:32 ABS 3D printing
14:33 Conclusions
#snapmaker - วิทยาศาสตร์และเทคโนโลยี
i plug my USB drive to a usb extension cable that i funneled through the loops ob the hand device - works for me ;)
for my case the hole for the filament was already predrilled - but i mounted the spoolholder inside the case, like you did (just a bit lower, moved back and to the left side - right behind the left z-axis), there are files for that on thingyverse - so you don't lose any build volume
for your further tests: for cnc an laser, you will hate the case :) due to static the fine dust will stick to the acrylic and you "never" get it perfectly clean, there will be always this microscopic dust layer you keep wiping off - but when you use it mostly for 3d printing, it is great
80 deg bed for abs, your going to have problems, probably with petg as well. I have been printing with an enclosed printer that can reach 100 d bed for years and abs is never guaranteed . Since it is so easy to glue abs, that becomes the best workaround.
Для АБС на вытяжку можно придумать HEPA фильтр от пылесоса маленького и вторым слоем поролон с углем - думаю, что этот пирог уберет запахи от пластика и воздух выдуваемый будет вполне безопасный.
Bed slingers take large deskspace and enclosure.
Оргстекло нормально с водой сверлится, но конечно,ю лучше бы попробовать на кусочке.
You should really start moving the channel over to more performant DIY printers. Nobody is buying this trash anymore and perpetuating it’s marketing to more people is only acting in disservice when you know the viewer would be better off with anything at all but an i3 kinematic machine.
Eh, not my choice. Somehow YT don't like my channel. 1-2000 vews per video. Not recommended even to regular subscribers. Somehow I am not on the list of those manufacturers..
What a stupid comment. Good luck CNCing anything with your Bambu or whatever.