Just unscrew all of them and the ones you can’t take out just keep them loose and try to open your laptop * this is probably irrelevant now but its worth a shot *
Hi, i dunno if youll see this comment but I was wondering uf you remember what TYPE of thermal pads you applied or were applied here? I cant find anytjing about what thickness is needed
Nice video bro. Thanks but what M2 SSD mounting bracket to use for installing additional Nvme SSD? And Is there any way to install M2 SSD without using the mounting bracket?
Did you add all those thermalpads/copper portions (such as the one near the top, below the battery charging cable plugged into the motherboard)? Mine does not look the same, and I'm seen some videos without the thermalpad at all. How important is it?
Were you able to find some? I accidentally trashed the pads in the VRAM, replaced them with dame thickness but they are too hard and now I'm throttling.
@@marksallows113 i am talking about the heat sink. The design of this laptop is reversed so you have to tear down the entire motherboard to get to the heat sink. Not sure how you were able to do it in 2 minutes.
@@siu281 which heat sink are you talking about? CPU? If that's the case, then I apologize as I misread statement. Others here have been commenting on the SSD heatsink/Thermal Pad. My bad.
@@siu281 yes dell engineering idiots thought it is a good idea to block the users and repairers from doing simple service like replacing thermal paste.
I hv this Dell g15, in my back of laptop i see a little bit of liquid in the vents of right corner, very little bit of liquid. Do u know what is that. But I'm playing games it's working well
Hey the two screws on the middle left and middle right are loose but don't come out.. and the two on the front left and front right I keep on turning but they don't even feel loose. Is it normal?
I have 2 questions 1. I just got a new gaming laptop (Dell G15 5511) and I’m not sure how to downgrade to windows 10 because it came with windows 11 2. I’m thinking of upgrading the ram because it only has 8gb of ram, do I have to replace the base ram stick and add 2 new ram sticks or only buy 1 new ram stick and keep the base ram stick in.
Better off replacing the base stick with a soild 2x8gb kit but you could always add a nother 8gb stick as long as its 3200 cl22 with a jedec profile as this laptop does not have XMP. As for windows just download the ISO on the windows website for 10 and boot from a usb. The CD key is tied to your bios.
@@yaboishadowninja that just happened to me today i thought i broke it at some points but then i just thought if its already broke brute force couldnt do more damage so i pulled very roughly and it came out
Is this recommended to do if I'm having heat issues? I got a cooling stand it's still getting pretty hot to the touch around the back and front vents/ fans
@@LaptopK1 bad in terms of cleaning and disassembly, however, the system is similar to almost all gaming notebooks, 3060 with a high-end cpu inside a small compartment there's no miracle that makes it all cold.
@@LaptopK1 Sadly I used the best none conductive paste on the market T Grizz Kyro and I only dropped 2-3c under load because these laptops are designed to keep boosting till they hit their thermal ceiling. Was it worth it for me a computer tech that knows what hes doing yes. Do I recommend most people to take a apart this laptop and remove the motherboard to get the the heatsink that is a firm no. They flipped the motherboard good for thermals bad to access lol.
@@estate-tidus1007 ikr. Thermal paste replacement on this laptop seems pretty complicated for a layman like me. I really wanted to buy it but after learning about its design I decided not to go for it.
@@estate-tidus1007 you should have tested the thermals without boost, upto the throttle limit (i.e. 93c) , idk how to limit this CPU clock since it's locked, to be honest you cant really test the thermals difference like this. I mean, if you got -3c it means it may have got -10c or even -20c because who-knows what clocks the laptop was running before the paste on average and after it.
@@LaptopK1 this is inaccurate information. I changed the thermal paste and used the Arctic MX-4 (negligible difference compared to grizzly), and it made a 2 degree celsius difference running everything at max. For most ppl, not worth the risk and voided warranty. get smart ppl.
@@oguzordu3415 Did you screw the screws that stayed on the cover? I just screwed them and the gap at the sides, that I couldn't close, gradually closed up.
@@oguzordu3415 Were you able to close it? Btw I'm Turkish too but i'm writing in english so that other people can understand our comments in case they need help.
@@QuarkPower9 Yes but no the left screw doesn't attach but I don't know the cause everything seems fine I'm thinking about talking with Dell Service Support but I don't think it'll cover the warranty and that's so nice of you for thinking about others lol
Hello, My Dell G15 getting heat up soon and temp dont drop unless I turn on G mode. Fan just doesn't work unless I switch on G mode. Please guide me what to do
![[LIVE] : ONE ลุมพินี 79 | คู่เอก "ก้องชัย vs อาเมียร์"](http://i.ytimg.com/vi/WfPSA1A0NHc/mqdefault.jpg)
Dell Gaming G15 5515 Ryzen 7 5800H RTX 3060 FHD 165Hz - Test game PUBG + CS GO
th-cam.com/video/l95AfrXCeM0/w-d-xo.html
Hello i from lithuania sory of mistakse wat ram beter for this noutbook my pc xarekteristic G15 5515 8ram 500GB ssd ryzen 5 5000 rtx 3050
I really like how the two usb ports and ethernet port are on tiny daughterboards. It really makes replacing those components really easy.
disassembling this laptop is not easy
My screws wont unscrew lol
Just unscrew all of them and the ones you can’t take out just keep them loose and try to open your laptop * this is probably irrelevant now but its worth a shot *
How Able to unscrew the same the middle screw keep making sound
yes
Hi, i dunno if youll see this comment but I was wondering uf you remember what TYPE of thermal pads you applied or were applied here? I cant find anytjing about what thickness is needed
I don't have exact specifications for the heatsink thickness, but it's easy to handle when you buy a thicker piece, then laminate it again.
Bro I liked your dot dot pattern of applying thermal paste 😃
Yeah, thank bro
Nice video bro. Thanks but what M2 SSD mounting bracket to use for installing additional Nvme SSD? And Is there any way to install M2 SSD without using the mounting bracket?
Just buy the bracket off Amazon its like 5-7$
@@estate-tidus1007 thanks! Never thought to look there; Dell's site was useless :(
@@estate-tidus1007 do you have a link to the proper one?
I didnt use one, it stays there real good anyway
@@ausmack8039 google DAMOMCO X8MY9 M.2 2230 2280 SSD Hard Drive
Support Bracket
Did you add all those thermalpads/copper portions (such as the one near the top, below the battery charging cable plugged into the motherboard)? Mine does not look the same, and I'm seen some videos without the thermalpad at all. How important is it?
maybe your configuration is different
5515 (Ryzen) and 5511 (Intel) have some differences on MB.
Thank you for the video. I'm having problem with vram overheating. So I will change the pads. Do you know what thermal pads are used over vram?
no , used thermal pads vram original
i had a big problem finding new pads, dell uses very very soft pads and the closest I found were Arctic 25 SHORE 00
Were you able to find some? I accidentally trashed the pads in the VRAM, replaced them with dame thickness but they are too hard and now I'm throttling.
Seems pretty complicated. I was about to buy this laptop but not so sure now because of the placement of the heat sink.
It’s not complicated once you see how the original SSD is installed. Took me 2 minutes
@@marksallows113 i am talking about the heat sink. The design of this laptop is reversed so you have to tear down the entire motherboard to get to the heat sink. Not sure how you were able to do it in 2 minutes.
@@siu281 which heat sink are you talking about? CPU? If that's the case, then I apologize as I misread statement. Others here have been commenting on the SSD heatsink/Thermal Pad. My bad.
@@siu281 yes dell engineering idiots thought it is a good idea to block the users and repairers from doing simple service like replacing thermal paste.
it's not easy
Does anyone know what the thickness dimensions of the thermal pads are in this laptop?
0.8 mm
I hv this Dell g15, in my back of laptop i see a little bit of liquid in the vents of right corner, very little bit of liquid. Do u know what is that. But I'm playing games it's working well
You do not need to worry
Hey the two screws on the middle left and middle right are loose but don't come out.. and the two on the front left and front right I keep on turning but they don't even feel loose. Is it normal?
Yes the only the very front 2 and the very back 2 come out fully
please be strong
Liquid metal or grease
liquid metal, not good for this laptop
did it lowered the average gpu/cpu temperature after cleaning the heatsink?
Will definitely reduce the temperature
Does the warranty gets void, when opened?
dell genuine warranty is still ok
We literally have to reduce it to its atoms to replace the thermal paste lol
True
thanks
Are the processor and video card soldered to the motherboard?
Yes
yes bro
Please! How to open the cooling fans? Does it take to remove the mobo to clean the heatsinks (remove internal dust)???
so ez
I have 2 questions
1. I just got a new gaming laptop (Dell G15 5511) and I’m not sure how to downgrade to windows 10 because it came with windows 11
2. I’m thinking of upgrading the ram because it only has 8gb of ram, do I have to replace the base ram stick and add 2 new ram sticks or only buy 1 new ram stick and keep the base ram stick in.
Better off replacing the base stick with a soild 2x8gb kit but you could always add a nother 8gb stick as long as its 3200 cl22 with a jedec profile as this laptop does not have XMP. As for windows just download the ISO on the windows website for 10 and boot from a usb. The CD key is tied to your bios.
Bro I have no clue to tf to open this laptop I tried but it doesn’t come off
@@bebetterthanthepersonyouwe5857 glad I'm not the only one
The base ram stick is most likely x16. So if you have the bucks to spare then replace it with a x8 stick and insert another x8 stick in the free slot.
@@yaboishadowninja that just happened to me today i thought i broke it at some points but then i just thought if its already broke brute force couldnt do more damage so i pulled very roughly and it came out
Is this recommended to do if I'm having heat issues? I got a cooling stand it's still getting pretty hot to the touch around the back and front vents/ fans
heatsink on dell g15 bad
Update bios if it isn't up-to-date.
My heating issue reduced a lot after doing so. Don't know what they did but it worked like magic!
@@Aditya-rh1rs i still getting 83-85C temps even if a update the bios, with fans on 100% and the laptop it’s suspended 10cm from desk.
You need to close intel turbo boost
@@LaptopK1 bad in terms of cleaning and disassembly, however, the system is similar to almost all gaming notebooks, 3060 with a high-end cpu inside a small compartment there's no miracle that makes it all cold.
How are you able to unscrew the my screws just won't come out
What screws are you having trouble with?
@@LaptopK1 I mean the middle 4 screws are loosened I can see them move but they refused to come out even after shaking the laptop
Sahi bathe ye plug in plug out wale graphics card nahi he solderd mehe
thanks
hi the middle screws wont come out and i hear a click sound again and again when i try to open them? can you help?
you unscrew all the screws, in the middle there is a big plastic mount, you can pull it hard
@@LaptopK1 it worked thanks!
@@LaptopK1 can you help me, i cant open it theres 4 screws that dont come out and if i pull i feel like im gonna break it
How Able to unscrew the same the middle screw keep making sound
Guys can somebody help me in my case I wanted to clean the vents cuz there's dust stuck in there causing rise in temperature.,
Use a small broom to clean
Was there any thermal performance increase after you repasted?
yes bro, i used noctua NTH2 - temperature drop 10 ' C
@@LaptopK1 Sadly I used the best none conductive paste on the market T Grizz Kyro and I only dropped 2-3c under load because these laptops are designed to keep boosting till they hit their thermal ceiling. Was it worth it for me a computer tech that knows what hes doing yes. Do I recommend most people to take a apart this laptop and remove the motherboard to get the the heatsink that is a firm no. They flipped the motherboard good for thermals bad to access lol.
@@estate-tidus1007 ikr. Thermal paste replacement on this laptop seems pretty complicated for a layman like me. I really wanted to buy it but after learning about its design I decided not to go for it.
@@estate-tidus1007 you should have tested the thermals without boost, upto the throttle limit (i.e. 93c) , idk how to limit this CPU clock since it's locked, to be honest you cant really test the thermals difference like this.
I mean, if you got -3c it means it may have got -10c or even -20c because who-knows what clocks the laptop was running before the paste on average and after it.
@@LaptopK1 this is inaccurate information. I changed the thermal paste and used the Arctic MX-4 (negligible difference compared to grizzly), and it made a 2 degree celsius difference running everything at max.
For most ppl, not worth the risk and voided warranty.
get smart ppl.
is that cloth anti-statics?
yes bro
Hi is it possible to mount an hdd on that laptop?
Oh no bro , can't mount HDD 2.5inch
4 screws are still on the cover right? Can you help?
Yes, 4 of them will stay on the cover. They'll just become loose
@@QuarkPower9 I managed to open the cover but when I tried to close it there's a gap on the left side it doesn't attach properly :(
@@oguzordu3415 Did you screw the screws that stayed on the cover? I just screwed them and the gap at the sides, that I couldn't close, gradually closed up.
@@oguzordu3415 Were you able to close it? Btw I'm Turkish too but i'm writing in english so that other people can understand our comments in case they need help.
@@QuarkPower9 Yes but no the left screw doesn't attach but I don't know the cause everything seems fine I'm thinking about talking with Dell Service Support but I don't think it'll cover the warranty and that's so nice of you for thinking about others lol
My back panel is not coming out.please help
2 screw behind and 2 more between fans maybe use pick
did you remove all the screws?
@@LaptopK1 yes it came out by pressing card in the edges.
Bro i have same laptop i recently buy it 6-7 days ago but in my laptop 56wh battery 🔋 and in your 86wh battery 🔋 why 🤔🤔
this is your option my friend
Maybe you have the version with a 3050 instead of a 3060. I say it because I have the 3060 version and if I have the 86wh battery.
@@LaptopK1 can i upgrade from 56 to 86wh battery
@@yashodeepwable6351 same question
?How to change the fans in this lap
remove all
Hello,
My Dell G15 getting heat up soon and temp dont drop unless I turn on G mode. Fan just doesn't work unless I switch on G mode.
Please guide me what to do
Please check the cooling fan
Does anyone know how to remove the battery connector 💀 it is very tight and I dont want to damage it by pulling
you shake the sides gently
I used a plastic spudger to gently and carefully push the connector out a tiny bit.
hi bro where is the thermal sensor located on this laptop
located on main
Nek circuit heat hue to pura jayega
ok pro
Where is the CMOS battery located? cant find it for the love of me
yah
Ye jada load nahi lesukte kyuki sub material ka khel hotahe kitna load lene layak machine bunayi jati ye pehle hi company clear kurletihe Statics
thanks
What GPU is that?
GPU RTX3060
who ever is recording needs to chill out on the caffeine
lol
Nhiệt độ giảm được bao nhiêu vậy bro
hơn 10 độ đó bạn ạ
Annoying music, if you can call it that!
thank you so much , I will edit the video later
@@LaptopK1 I love your video! Just maybe turn the music down a bit. Thank you so much
@@RadientLight thank you, I will adjust
My screws wont come out and idk how to get them out now
Same
How Able to unscrew the same the middle screw keep making sound
yes
Where's the Nvidia graphics card located
yesh bro
explain and remove
ok bro
Video x1,5
yes, bro
how often do I need to change the Thermal Paste on this laptop
if you use good thermal paste, mx4, nth2, grizzly kryonaut. once every 1-2 years, depending on the environment you use, and how you use it ,
@@LaptopK1 do you know the millimeters of the thermal pads?