Because of this video i finally ordered the correct belt size. I started with the 842 then the 835 not realizing i needed the 743 because i have a short case with 10" wheels.
Thank you ... by the way ... for taking the time to do this. Much appreciated, especially the sizes. Yeah ... I know you said it was boring ... but absolutely necessary. Thanks again !
Very helpful, not boring ,also am I supposed to take the variator off,some people say no,an if so how do you that without it turning on you while trying to take it off,my brother in law has been helping me on maintaining it but I tried explaining to him how to do it,it's new to us,ty
You might be boring to someone who has not replaced their own belt yet. But I learned a couple of things here. For those who put the correct belt on and find it don't fit,. Turn it over.🤗
my belt now is 842-20-30 and i just order a 828-22.5-30 i am wondering what will be the difference or it will couse trouble one's im rolling with the 828-22.5-30? from what i undertand, 842 is the circle size of the belt,my belt is kinda lose thats why i chose 828 so it will give me a little bit of a snug from the varator and the clutch. 20 is the width of the belt, im thingking that it may help to go more top end cousing the clutch or the spring to squiz more. 30 is the hight of the belt. is it gonna couse a trouble at the end or is my clutch will be on strees cousing the whole clutch to wobble? does any body have try this set up yet? i would love to know the answer. thanks for posting this video i learn alot about belt.
Belt that came on my baja sc50 is 836-17-30 ... feels impossible to find a direct replacement. Would a more common 835-17-28 work okay on it as a substitute?
If you have a 835-20-30 belt can you jump to a 842-20-30 and see any kind of gains in speed with a stock variator setup for a 150cc long case with 12 inch wheels cause I have a VIP powermax with the 835belt but the chuckus I use to have had a 842 belt same engine 157qmj
No prob. To be honest I had already ordered a couple belts for my scooter. I seen some of your other videos so I figured I would watch this one for shiggles.
Thankyou so much I have a peacesports ar50 2021 and my belt was unreadable now I know what belt I need I have the 12 inch rims I can’t seem to find the Kevlar one at 729-17.7-30 do you have a link and ya sucked it broke and I had to walk it home in 95 degree weather so I want the Kevlar
help!!! Does the 835 20 30 belt make it take up initial gearing early? As I think I've put the wrong belt on. Should be 842 20 30 I think? Like there's no revs till it turns the back wheel. I've put a 1.500Rpm spring in but made no difference
how do i know what size kev belt to get. i have a keeway 150cc with 12" wheels. my current chinese belt is 828X20.1X30. so what would be the best replacement 742, 835, 842...etc...i don't have a clue lol
cool man thanks , the dillweeds on the web site recomended an 842 2030 for my 150 . NOT. way too long thanks for the heads up on the good ones , exactly what i thought.
My belt claims to be 835 - 20 - 30, I got a new one as it was old and thought might aswell replace it. same size, 835 - 20 - 30 just made of a better material. I had it fitted, got halfway down the road before it screeched. the new belt is 20mm, however after checking the old belt I found it was 17-18mm being a 835 - 18 - 30. the new one was causing friction against part of the variator. not sure what todo as I cant find a 835 - 18 - 30
I get that this video is now approaching 8 years, but I am 99% certain that the Gates belt shown here (788 x 18.1) is a counterfeit item. It's not listed in the catalog and the markings are all wrong. Real Gates belts are great.
Hi, Thank you for your info, what if I currently have a 723-18-30? It’s a 50cc icebear 1p39qmb wit 12” rear wheel. I want to upgrade the cvt and clutch to a better one and all the good kits offer is the 729 belt. What to do in this situation? What will going from a 723 to 729 do to my performance? Thanks in advance! Mark
Definitely subscribe that for the info so if I have a 13 in. Tire 250cc what belt would it be , the it has right now is real loose, or is there a way to tighten it up some more? Pls reply
My stock belt is 818-19.7-28 but there isn't a Gates belt in that size. They have one that is .7mm narrower 818-19-28. Am I stuck with the factory size or would the Gates belt work? This is on a Sym 200i.
what's up brother this is my problem hope you can help me out.in the past 2 months I have put onto Gates belts on my GY6 short case, with a 100 CC Big Bore Kit.both belts snapped within a month of each other.I am using the 669,18,30
I have the scooter, 2014 Motomia 170 Sport. I want buy a new drive belt, because the old one did broke off. The service put the 856x25x30 drivebelt, but it kept 3 months, then it broke off again. The other shop did say I must buy 835x20x30 drivebelt. Why is it different? I want know about the specific size of drive belt for Motomia 170cc. Their band size is 13". Thanx Sam
I have a 50cc raptor long case 139qmb. Cause I have real fat tires and there 12". So please help me with the exact size belt for this tire of scooter. Cause I already bought the wedding belt for it.
I heard that also. He mentions a long case 150cc with 12-13 inch rim using either size. I would not think that is right but maybe both belts can fit???
I have ve a 150 cc got a stupid Chinese belt It was a pain in as I have 12 nch rims I feel like it's a long belt built in 2016 so many numbers pain in ass Need the Wright one pls
I know this my be a long shot but I need some help finding a replacement belt for my 2007 genuine scooter company blur 150. Only made them for a year or two in the states and I can't find them anywhere. Dimensions are 812/20/28 please help
I have the MC-08-50b Benzhou scooter and the numbers on my belt don't match any that you had just mentioned. I believe what is telling me is 7.7 X 681 Which belt should I get for the scooter? Also, when I take the case off the spring dropped out and a piece of metal that was broken fell out to. Can you give me some direction on this please
OK I have a dilemma I have a 50 scooter it has 10 inch wheels and the belt that came off of it was a VS18 30-11-28. And I ordered the belt you said that goes on there but it is a little bit too wide and too short. And no where online can I find a belt that matches the numbers with the old belt! Do you have any suggestions or any information that could help me? Thanks
I believe that 4,000km is what you are going to get no matter what belt you use,,,,, you lose 1hp for every 500 miles on a cvt transmission so that being said a cheap chinese belt will without a doubt get you 4,000km and between $7-$10 to replace.
Wondering if you could help, I keep burning through my belts really fast. I have a nice Kevlar belt But still going through them real fast, Like 20 miles later fast. My only guess would be my rollers are too heavy. Am I on the right track. I am running 10g On an 80cc big bore kit 139QMB. Wolf blaze
Im having same problem with same size.... I seen someone replace the belt without taking the front clutch offs no way in the world I can do with this size belt and don't have access for impact gun to get the bolt off the front clutch so I'm like stuck right now I just broke a couple fins off of my front clutch. I'm wondering if that will affect it anyway? I have a 150 and I believe with 10 inch wheels... correction to that, that's 13 inch rim rims
i was in the same poisition as you until today.i stuck an allen wrench to the starter gear and took a pry bar and a long socket.came right off.broke my original pulley fins before trying this
I don't see alot of responses but i'll ask anyway, My Keeway Agora 4T 50cc broke its belt, the size says 17.7x749, but i can't find one anywhere. Is there another size i can use? I can't even find what size it's supposed to be anywhere. i was told a Kymco agility 50cc is about the right size but...how much variance in length and width can be used?
My 50cc 10" wheel scooter came with a 17.7 x 681 belt and I could only find one place on line that stocked them. It is a Chinese belt. Do you know where I can get a better grade belt in this size? Thank you.
if you can not find the correct size, bring to moped shop. But bring with you your own battery operated impact wrench to finish the job. They tend to put on tight enough to secure a bridge, so you have to use there machine to remove same nuts next time. 🤔🤗
I don't kno I've been having the same problem I've went through 3or4 belts n a week they shred with in 5 or 10 mins of riding so if u get an awnser please let me know as well
@@gbmike1xx565 you need to remove clean and inspect both clutches and replace anything worn. My scooter kept blowing belts apart and I replaced the main clutch on the engine and then found the secondary was binding and wouldnt open all the way also causing the scooter to be slow. I took it apart and cleaned it up but it still had issues so I ended up replacing that too
My original belt is 723x18x30, got 12"wheels and im definetly sure its a long case. Can i use the 729 on there then? or do i have to have the same? cause im kinda struggling to find the same. Even on ebay
I buy one of those cheap chinese belts for my 2004 yamaha zuma 50cc 2 strokes and make a mistake dont check the lenght of belt Now my scooter is slower at take off and my top speed is only 35 mph from 40 before. You know what size is for that zuma with horizontal minarelli. I am going to buy the gates powerlink but nobody have the size in Miami
Buy a 788 belt. i run it in my Eton beamer and it does 50 mph easy. also make sure to dremel out variator ramps so that the rollers go all the way out so the belt gets pushed all the way to the top.
Ok,I'm having trouble with my belt, I order a 835,it fit my long case 50cc moped, but the width is slightly too wide,I mean it'll fit on the rear pulley fine but won't fit down on the pulley behind the variator,so I order another belt,729 17.7 like recommend, an is long case but it's a tad short,why is that when it same size that was shredded in the first place,I thought about sending these back can you help tell me which will fit,I haven't taken the variator off,I will one of these before I order another belt an send these back,also if the 835 belt I put on my moped,12 inch wheels long case,Will seat itself on there after I start up the bike,an should I put the case back on it or leave it off until Iake sure it works,super confusing, ty,your about the only one who makes sense with these
Here is the belt you need. The 835 is for a 150cc. This is the long case belt for the 50cc www.rollingwrenchdenver.com/products/cvt-drive-belt-for-long-case-50cc-qmb139-engines-with-12-13-rear-wheel?ToPasteboard
@@RollingWrench, cause the original belt was torn to shredds,it was a 17.7 or 17.9,I ordered a belt that size long case,but when I I put on resr,its about 2 inches short to the first pulley,is that way it's supposed to be,do I need to take the variator off to place it on there?
@@RollingWrench, ok so finally got a belt,was wondering now that it's set a couple of weeks, it's running rough,seems like it's not get enough air,I've done checked an clean air filter,it won't pick up speed until 5 mph or so,having trouble
@@RollingWrench, it's not my spark plug, it's a good quality, I'm thinking it could be my original carburetor, not sure,gonna try an take it to a shop,I don't wanna blow up my motor.
It's not at all a "Boring" video Buddy! You did GREAT. I know it helped me a ton. Keep teaching us....keep helping us grow.
Because of this video i finally ordered the correct belt size.
I started with the 842 then the 835 not realizing i needed the 743 because i have a short case with 10" wheels.
Awesome!
Thank you ... by the way ... for taking the time to do this. Much appreciated, especially the sizes. Yeah ... I know you said it was boring ... but absolutely necessary. Thanks again !
2023 this video was definitely useful. THANK YOU.
I'm all the way down in south America guyana 🇬🇾 and trust me this video was very useful
It not boring, it very helpful. Fixing my sons moped and sure in the hell don't know anything about them Right on, thanks
my belt just snapped today thanks for the information on the right belt you prefer. cool bro
He was right, this is helpful! Thank you
1:50 thank you, I was very confused because og these two identical belts with different names
Very helpful, not boring ,also am I supposed to take the variator off,some people say no,an if so how do you that without it turning on you while trying to take it off,my brother in law has been helping me on maintaining it but I tried explaining to him how to do it,it's new to us,ty
Very useful. Better if in order.
Hey, I gotta honda cub ez90. Good luck finding that belt!!!!! If the belt wears out, sell the bike for parts!
You might be boring to someone who has not replaced their own belt yet. But I learned a couple of things here. For those who put the correct belt on and find it don't fit,. Turn it over.🤗
50cc trike with 12 inch wheels and I have a 723x117.5x28! Another one to add to the list of confusion!
Great video, exactly what I needed to know!
John what belt did u get ? Cause I have a champion 49cc taotao s scooter and I'm not sure what to get for mine
Very useful video
Thanks 🙏🏽
Thank you so much
my belt now is 842-20-30 and i just order a 828-22.5-30 i am wondering what will be the difference or it will couse trouble one's im rolling with the 828-22.5-30?
from what i undertand,
842 is the circle size of the belt,my belt is kinda lose thats why i chose 828 so it will give me a little bit of a snug from the varator and the clutch.
20 is the width of the belt, im thingking that it may help to go more top end cousing the clutch or the spring to squiz more.
30 is the hight of the belt.
is it gonna couse a trouble at the end or is my clutch will be on strees cousing the whole clutch to wobble?
does any body have try this set up yet?
i would love to know the answer.
thanks for posting this video i learn alot about belt.
It might have been boring but I wish I would have listened to it earlier… It would’ve save me a lot of running around
What belt should I use for 49cc Coleman mopad??🤔🤔
I went trough 6 Chinese belt…get real belt, it’s worth the money
True story
I went through two belts and they both got chewed up I finally released I was getting the wrong size belts.I finally got the right size this time
Hey Matt can you please post a video on how to replace my Yamaha Vino 125 belt??
Belt that came on my baja sc50 is 836-17-30 ... feels impossible to find a direct replacement. Would a more common 835-17-28 work okay on it as a substitute?
Someone said the belt and slightly larger variator is best upgrade next to exhaust and carb. Can you recommend what belt and variator for a 2024 teyin
If you have a 835-20-30 belt can you jump to a 842-20-30 and see any kind of gains in speed with a stock variator setup for a 150cc long case with 12 inch wheels cause I have a VIP powermax with the 835belt but the chuckus I use to have had a 842 belt same engine 157qmj
good video was very handy
No problem, be sure to subscribe!
On the 12in will the 17.5 work also?,I see that,and the 17.7
What would a vitacci tank 200 deluxe take? It’s actually a 168cc with 13 inch tires.
He's here to sell belts... not answer questions. Thanks and have a nice day.
@@RollingWrench This comment wasn't for you. Duh!
@@thelagmeister sorry, i miss understood :-)
No prob. To be honest I had already ordered a couple belts for my scooter. I seen some of your other videos so I figured I would watch this one for shiggles.
Thankyou so much I have a peacesports ar50 2021 and my belt was unreadable now I know what belt I need I have the 12 inch rims I can’t seem to find the Kevlar one at 729-17.7-30 do you have a link and ya sucked it broke and I had to walk it home in 95 degree weather so I want the Kevlar
Which belt recommended for suzuki sixteen UX150
Would like an update on the video have a 2020 rocket 50cc 12 inch tire is the second choice for 50cc what you would recommend
Is there such thing as a 400cc gy6?
No, there is not.
maybe you can make it a 400cc🤔🤗
help!!! Does the 835 20 30 belt make it take up initial gearing early? As I think I've put the wrong belt on. Should be 842 20 30 I think? Like there's no revs till it turns the back wheel. I've put a 1.500Rpm spring in but made no difference
NOPE NO SUCH THING
yamaha tmaxx
Thanks!
If it's a 906-22-30 I ordered that but got a 906-22.5-30 will it work?
how do i know what size kev belt to get. i have a keeway 150cc with 12" wheels. my current chinese belt is 828X20.1X30. so what would be the best replacement 742, 835, 842...etc...i don't have a clue lol
thank you so much!
X-Pro Fiji 200cc. Aka Adventurer 200. Can you link me the proper gates kevlar.?
what would be helpfull is the width in regard to variation....length as well. these are just the OEM replacement numbers
cool man thanks , the dillweeds on the web site recomended an 842 2030 for my 150 . NOT. way too long thanks for the heads up on the good ones , exactly what i thought.
My belt claims to be 835 - 20 - 30, I got a new one as it was old and thought might aswell replace it. same size, 835 - 20 - 30 just made of a better material. I had it fitted, got halfway down the road before it screeched. the new belt is 20mm, however after checking the old belt I found it was 17-18mm being a 835 - 18 - 30. the new one was causing friction against part of the variator. not sure what todo as I cant find a 835 - 18 - 30
I get that this video is now approaching 8 years, but I am 99% certain that the Gates belt shown here (788 x 18.1) is a counterfeit item. It's not listed in the catalog and the markings are all wrong.
Real Gates belts are great.
My kymco super 8 has 14” tires , will the ones for 13” work?
I have ac vitacci clash 200cc 14" rims what size belt will it take good one. thanks
Are you going by the inch of the tire or what inch rim ?
The tires and the rims are always the same size. Otherwise they wouldn’t fit together. The actual measurement is taken where the tire meets the rim
how about a common scooter now has 14inc wheel what size is good for it?
Hi,
Thank you for your info, what if I currently have a 723-18-30? It’s a 50cc icebear 1p39qmb wit 12” rear wheel. I want to upgrade the cvt and clutch to a better one and all the good kits offer is the 729 belt. What to do in this situation? What will going from a 723 to 729 do to my performance? Thanks in advance! Mark
Im in the same situation mate. I dont want to buy if its not going to work.
My 669 belt seams too short, doesn't use the full face. Can I get a longer one.
Short engine
Definitely subscribe that for the info so if I have a 13 in. Tire 250cc what belt would it be , the it has right now is real loose, or is there a way to tighten it up some more? Pls reply
I want a thicker belt, not regular 18. What reference number should I look for?
My stock belt is 818-19.7-28 but there isn't a Gates belt in that size. They have one that is .7mm narrower 818-19-28. Am I stuck with the factory size or would the Gates belt work? This is on a Sym 200i.
Is this still an active thread
What are u gonna measure rim or tire
Whats the size belt for a ALE X ONE BD 150T-9 scooter
what's up brother this is my problem hope you can help me out.in the past 2 months I have put onto Gates belts on my GY6 short case, with a 100 CC Big Bore Kit.both belts snapped within a month of each other.I am using the 669,18,30
What would be the starter and the drive number for a 2015 kymco long block scooter
I have a 125 longcase but my belt is 799x19x28 can i still buy the 842....
I have the scooter, 2014 Motomia 170 Sport. I want buy a new drive belt, because the old one did broke off. The service put the 856x25x30 drivebelt, but it kept 3 months, then it broke off again. The other shop did say I must buy 835x20x30 drivebelt. Why is it different? I want know about the specific size of drive belt for Motomia 170cc. Their band size is 13". Thanx Sam
I have a 50cc raptor long case 139qmb. Cause I have real fat tires and there 12". So please help me with the exact size belt for this tire of scooter. Cause I already bought the wedding belt for it.
So if I heard right I can use either an 835-30-20 or an 842-30-20 on my 150cc with 12" wheel? So what is the difference?
I heard that also. He mentions a long case 150cc with 12-13 inch rim using either size. I would not think that is right but maybe both belts can fit???
@@slscootercothey can have both
Is a mallossi kevlar belt good?
my honda nsc50r comes with a stock belt 785x18x30 .will a polini 769x19x30 fit ?
Not a fan of kevlar for the 2t... what do you think about the polini belt?
I have ve a 150 cc got a stupid Chinese belt
It was a pain in as
I have 12 nch rims
I feel like it's a long belt built in 2016 so many numbers pain in ass
Need the Wright one pls
Thak you how will i know the direction of belt if there is no arrows on it?
how check belting kxct 200i or different model to use
I know this my be a long shot but I need some help finding a replacement belt for my 2007 genuine scooter company blur 150. Only made them for a year or two in the states and I can't find them anywhere. Dimensions are 812/20/28 please help
I have the MC-08-50b Benzhou scooter and the numbers on my belt don't match any that you had just mentioned. I believe what is telling me is 7.7 X 681 Which belt should I get for the scooter? Also, when I take the case off the spring dropped out and a piece of metal that was broken fell out to. Can you give me some direction on this please
Can you tell me gates branded ia recommended or not .
Gates is a great brand!
I took ur advice about the bigger belt.. but it's still not right. Would u have any suggestions?
I recently installed a 100 cc big bore I heard changing belts adds 10 mph to speed ?
I have 12 inch wheels and it's a 150cc what belt should I use ,my old one shredded
you saved me thank you so much #842-20-30 🙌🏾
Would you know what size belt for a gy6 90cc buggy.? Thanks Dave
What belt size does honda navi use 110 cc ?
OK I have a dilemma I have a 50 scooter it has 10 inch wheels and the belt that came off of it was a VS18 30-11-28. And I ordered the belt you said that goes on there but it is a little bit too wide and too short. And no where online can I find a belt that matches the numbers with the old belt! Do you have any suggestions or any information that could help me? Thanks
I believe that 4,000km is what you are going to get no matter what belt you use,,,,, you lose 1hp for every 500 miles on a cvt transmission so that being said a cheap chinese belt will without a doubt get you 4,000km and between $7-$10 to replace.
What size of belt i need for Suzuki address v125?
should I be using a different size belt
Wondering if you could help, I keep burning through my belts really fast. I have a nice Kevlar belt But still going through them real fast, Like 20 miles later fast. My only guess would be my rollers are too heavy. Am I on the right track. I am running 10g On an 80cc big bore kit 139QMB. Wolf blaze
Ya! Definitely the issue. I would run 6g. You can also check to be sure your clutch pulley isn’t locked up
@@RollingWrench thank you and love everything you do my friend. Thanks for all your knowledge.
Whats 12itch wheels? For belt size 50cc
Where can i buy the MRP😊
would it fit
what size for gilera runner vxr200?
my 842 20 30 seems to be too small, it's the number that came off the old one, What's the next size up
Im having same problem with same size.... I seen someone replace the belt without taking the front clutch offs no way in the world I can do with this size belt and don't have access for impact gun to get the bolt off the front clutch so I'm like stuck right now I just broke a couple fins off of my front clutch. I'm wondering if that will affect it anyway? I have a 150 and I believe with 10 inch wheels... correction to that, that's 13 inch rim rims
i was in the same poisition as you until today.i stuck an allen wrench to the starter gear and took a pry bar and a long socket.came right off.broke my original pulley fins before trying this
very hlepful
what size need c.p.i popcorn 50cc?
I have eton beamer belt size is 780x16.5x30 i cant seem to find a belt in kevlar in that size
I have a scooter and i dont know what belt size to get brcause my current one its too short, scooter is kymco agility 16+ 50cc 4t 2019
The original belt is 837.20.30 and the belt am getting is 841.20.30
could i use a car belt on a 2011 vip 49cc?
I don't see alot of responses but i'll ask anyway, My Keeway Agora 4T 50cc broke its belt, the size says 17.7x749, but i can't find one anywhere. Is there another size i can use? I can't even find what size it's supposed to be anywhere. i was told a Kymco agility 50cc is about the right size but...how much variance in length and width can be used?
My 50cc 10" wheel scooter came with a 17.7 x 681 belt and I could only find one place on line that stocked them. It is a Chinese belt. Do you know where I can get a better grade belt in this size?
Thank you.
if you can not find the correct size, bring to moped shop. But bring with you your own battery operated impact wrench to finish the job. They tend to put on tight enough to secure a bridge, so you have to use there machine to remove same nuts next time. 🤔🤗
What makes a new belt shred?
RSVP
I don't kno I've been having the same problem I've went through 3or4 belts n a week they shred with in 5 or 10 mins of riding so if u get an awnser please let me know as well
Rebuild the clutch the rollers have flat spots
@@Masterkill45588 hey buddy what parts would that be my belt snapped not shredded?
@@gbmike1xx565 you need to remove clean and inspect both clutches and replace anything worn. My scooter kept blowing belts apart and I replaced the main clutch on the engine and then found the secondary was binding and wouldnt open all the way also causing the scooter to be slow. I took it apart and cleaned it up but it still had issues so I ended up replacing that too
My original belt is 723x18x30, got 12"wheels and im definetly sure its a long case. Can i use the 729 on there then? or do i have to have the same? cause im kinda struggling to find the same. Even on ebay
my qmb139 long case got a 729mm stock i think you will be good with it
2009 eton electric scooter ??? what size drive belt
Went to your site your search engine Sucks couldn't put in Tao scooter.
I buy one of those cheap chinese belts for my 2004 yamaha zuma 50cc 2 strokes and make a mistake dont check the lenght of belt
Now my scooter is slower at take off and my top speed is only 35 mph from 40 before.
You know what size is for that zuma with horizontal minarelli.
I am going to buy the gates powerlink but nobody have the size in Miami
Buy a 788 belt. i run it in my Eton beamer and it does 50 mph easy. also make sure to dremel out variator ramps so that the rollers go all the way out so the belt gets pushed all the way to the top.
Ok,I'm having trouble with my belt, I order a 835,it fit my long case 50cc moped, but the width is slightly too wide,I mean it'll fit on the rear pulley fine but won't fit down on the pulley behind the variator,so I order another belt,729 17.7 like recommend, an is long case but it's a tad short,why is that when it same size that was shredded in the first place,I thought about sending these back can you help tell me which will fit,I haven't taken the variator off,I will one of these before I order another belt an send these back,also if the 835 belt I put on my moped,12 inch wheels long case,Will seat itself on there after I start up the bike,an should I put the case back on it or leave it off until Iake sure it works,super confusing, ty,your about the only one who makes sense with these
Here is the belt you need. The 835 is for a 150cc. This is the long case belt for the 50cc www.rollingwrenchdenver.com/products/cvt-drive-belt-for-long-case-50cc-qmb139-engines-with-12-13-rear-wheel?ToPasteboard
@@RollingWrench ,ok ry so much, I'll try to or#r hems on as possible, you've been most helpful
@@RollingWrench, cause the original belt was torn to shredds,it was a 17.7 or 17.9,I ordered a belt that size long case,but when I I put on resr,its about 2 inches short to the first pulley,is that way it's supposed to be,do I need to take the variator off to place it on there?
@@RollingWrench, ok so finally got a belt,was wondering now that it's set a couple of weeks, it's running rough,seems like it's not get enough air,I've done checked an clean air filter,it won't pick up speed until 5 mph or so,having trouble
@@RollingWrench, it's not my spark plug, it's a good quality, I'm thinking it could be my original carburetor, not sure,gonna try an take it to a shop,I don't wanna blow up my motor.