Good to know on the additive. I’ve used sea foam in my cars oil to free up pressure codes and ticking lifters. Works great every time. Must be similar.
Leave the jumping of Harleys to Evil Knievel... railroad tracks are to high for us street riders.🤣 Glad you didn't break any bones! The Co-Part bike turned out nice.
Now I get to share what I did. My wife and I got back from a long ride around Carlyle Lake Saturday. Pulled into my parking spot and once stopped I layed the bike over...😔. My wife was wiggling around on the back like she was on a dance floor. Thank goodness for the engine guards....no harm done.
Sucks that you went down.. Good it wasn't bad .. On your chopper ..Parasitic draw..?? Test light between negative post and neg cable .. Bad 1157 tail/brake light bulb..filament broken..resting on other filiment causing draw..bad/questionable brake light switch..?? 😎👍😎
I've been trying to figure out how to route the front brake line on my sportster build with the moto iron springer front end. Got a look at yours and the zip ties. Wish I could find a cleaner way to do that, but I think you may have found the only solution. I wish moto iron would come out with a stylish clamp for their springer for the brake line. Your chopper looks great, by the way.
My crank sensor would heat up. And shut car down. . I don’t know how you can tell if sensor or something heats up. Up. Hotter than normal. And shuts bike down.?? 😮
Good to know on the additive. I’ve used sea foam in my cars oil to free up pressure codes and ticking lifters. Works great every time. Must be similar.
Seafoam is good stuff. I'm a bit biased with the BG products because I used them everyday for 15 years.
Leave the jumping of Harleys to Evil Knievel... railroad tracks are to high for us street riders.🤣
Glad you didn't break any bones!
The Co-Part bike turned out nice.
It was a truck crossing, if I had suspension I think it would of crossed it fine🤣
Now I get to share what I did. My wife and I got back from a long ride around Carlyle Lake Saturday. Pulled into my parking spot and once stopped I layed the bike over...😔. My wife was wiggling around on the back like she was on a dance floor. Thank goodness for the engine guards....no harm done.
Glad to hear that all is well
Glad to hear you’re ok from going down on the bike. Ride safe out there 😎👍
I'll try to🤣
License plate - my 94 leaky
Straw and a nasal bulb at general dollar or drugstore draw out unwanted fluids yk
Great video Thanks 👍
Yeah I didn't think about doing that until I had burnt off the half quart.
The softail looks good. So different than when you got it. Good video 👏🏻👏🏻👏🏻
I know it's like......fixed🤣
Sucks that you went down..
Good it wasn't bad ..
On your chopper ..Parasitic draw..??
Test light between negative post and neg cable ..
Bad 1157 tail/brake light bulb..filament broken..resting on other filiment causing draw..bad/questionable brake light switch..??
😎👍😎
It doesn't kill the battery sitting. The charging system just stops mid ride. I'm hoping the voltage regulator has been the issue.
I've been trying to figure out how to route the front brake line on my sportster build with the moto iron springer front end. Got a look at yours and the zip ties. Wish I could find a cleaner way to do that, but I think you may have found the only solution. I wish moto iron would come out with a stylish clamp for their springer for the brake line. Your chopper looks great, by the way.
Unfortunately its the best way i could find. I agree with you though. Thanks for watching
the chopper is a baby sportster.
Your penis is a baby penis
My crank sensor would heat up. And shut car down. . I don’t know how you can tell if sensor or something heats up. Up. Hotter than normal. And shuts bike down.?? 😮
Electronic ignitions SUCK!
Its not an ignition issue, its a charging issue.