I have similar thing going on right now. 132 active. Sensor 1 reads .56V and depressed pedal reads 2.10V. Sensor 2 is constant 2.4V depressed and released. Have 5V at the supply terminal at the pedal. No high resistance in harness. No cross shorts in harness and no shorts to ground and no loose terminals, 99% sure it needs a new pedal. I need one for a 2010-2012 cm2250. Cant find a part number.
Accelerator Pedal or Lever Position Sensor 1 and 2 - Data Erratic, Intermittent, or Incorrect. Accelerator position sensor number 1 and number 2 are reading different values. Help me, cummin isx 2350 😢
I have almost similar problem no throttle when taking a sharp left cel with come on with code 1242 on and off anything i can do to fix that I already changed the pedal
I have 2018 international LT Cummins engine ISX 15 Sometimes I hear a loud “clank” noise when I start engine and the engine either shuts down or sound like it’s about too. If it stays running, within 5-10 minutes of driving it derates. I will stop for a few minutes with engine off. When I start engine it’s fine again. Any thoughts on what I need to do to fix this problem? Thanks in advance
Do you have any fault code, or CEL on? Can't say for sure with this little info. Possibly fuel problem? When did you last change your fuel filter? Is the clank a metallic sound?
![[ไฮไลต์] แบดมินตันชาย SHI Yu Qi (จีน) vs วิว กุลวุฒิ (ไทย) รอบ 8 คน | โอลิมปิก 2024](http://i.ytimg.com/vi/f7z7taforOM/mqdefault.jpg)
thanks for info
Thank u!
I have similar thing going on right now. 132 active. Sensor 1 reads .56V and depressed pedal reads 2.10V. Sensor 2 is constant 2.4V depressed and released. Have 5V at the supply terminal at the pedal. No high resistance in harness. No cross shorts in harness and no shorts to ground and no loose terminals, 99% sure it needs a new pedal. I need one for a 2010-2012 cm2250. Cant find a part number.
Accelerator Pedal or Lever Position Sensor
1 and 2 - Data Erratic, Intermittent, or
Incorrect. Accelerator position sensor
number 1 and number 2 are reading different
values. Help me, cummin isx 2350 😢
I have almost similar problem no throttle when taking a sharp left cel with come on with code 1242 on and off anything i can do to fix that I already changed the pedal
Hi.
Well done.
I am a new truck owner.
Need that software.
What is the steps to get it
Still interested?
I have 2018 international LT Cummins engine ISX 15
Sometimes I hear a loud “clank” noise when I start engine and the engine either shuts down or sound like it’s about too. If it stays running, within 5-10 minutes of driving it derates. I will stop for a few minutes with engine off. When I start engine it’s fine again. Any thoughts on what I need to do to fix this problem?
Thanks in advance
Do you have any fault code, or CEL on? Can't say for sure with this little info. Possibly fuel problem? When did you last change your fuel filter? Is the clank a metallic sound?
@@radieseltech6417
The code is SPN157 and the sound was metallic sound.