I would love to see a video on the basic financial cost of running and what you charge for making the mold and how much you change for 1000 or 10,000 parts. or how long it takes to pay off the equipment.
Let me see what I can do. I do research too, so 1/2 the cash flow is for product development. I have an engineering day job and I do side work too. In general $60/ hour for machine time
Very impressive shop and equipment. I am very puzzled by your terminology of mold components. Over 40 years of experience in the industry I have never heard of a lot of the terminology you use. I would also suggest some updated mold design software to eliminate design errors causing you repair work.
What do you do with the plastic waste? Rejected parts, that blob of purged plastic etc. Does it get recycled and mixed into future batches? At what percentage of virgin plastic?
I do grind up the waste plastic and mix it in with virgin, unless customer-says no. I have a couple grinder episodes if you want to see. I cant grind big blobs( boulders of plastic though). Usually 10% regrind
Hmm, if I put a screw into the 4th actuator hole then I would be making a 250 ton screw cutting machine. That was not my intension there. Thanks for watching.
YOUR MOLD PROTECT IS NOT SET CORRECTLY. MOLDING FOR 20+ YEARS, AND WE USE A BUSINESS CARD. IF THE TOOL LOCKS OVER ON IT, WE CAN GET WROTE UP, POSSIBLY FIRED. YA IT WORKED THE SECOND TIME, BUT STILL SHOULD NOT HAVE LOCKED OVER THE FIRST TIME EVEN IF THAT TUBE WAS WARM AND SOFTENED. BUT I ALSO DEAL WITH 500K TO 2.5 MILLON DOLLAR TOOLS.
![เบิ้ล ปทุมราช - สาวสอง ( มีมี่ของอ้าย ) ft. ตาต้า,ต้องเต [OFFICIAL MV]](http://i.ytimg.com/vi/mqlMjnP08XI/mqdefault.jpg)
I would love to see a video on the basic financial cost of running and what you charge for making the mold and how much you change for 1000 or 10,000 parts. or how long it takes to pay off the equipment.
Let me see what I can do. I do research too, so 1/2 the cash flow is for product development. I have an engineering day job and I do side work too. In general $60/ hour for machine time
Very impressive shop and equipment. I am very puzzled by your terminology of mold components. Over 40 years of experience in the industry I have never heard of a lot of the terminology you use. I would also suggest some updated mold design software to eliminate design errors causing you repair work.
Just being curious. How much is a mold like this one ?
.
.
I think it was ~$9000 USD, it's been a while since I made it. Thanks for watching!
Muito bom
Thanks!
I'm interested to know how much clearance you allow for the ejectors so they operate freely but don't flash? Nice video...gnarly welding 😂🙂
Usually 0.0005” or 13 um per side of the ejector. Also acts as an air vent. Thanks for watching!
What do you do with the plastic waste? Rejected parts, that blob of purged plastic etc. Does it get recycled and mixed into future batches? At what percentage of virgin plastic?
I do grind up the waste plastic and mix it in with virgin, unless customer-says no. I have a couple grinder episodes if you want to see. I cant grind big blobs( boulders of plastic though). Usually 10% regrind
so if a pneumatic feature fails, you have no error proofing then WOOPSIE? where are the proximity sensors?
so far not a problem, maybe I will add them if I can for a future run. Thanks for watching
Have need to inject the air compressor.?
How to cooling the mould.
This aluminum mold conducts heat enough to not need cooling
I know this work
at 13:00 you mising a screw for the actuator connector
within qc specs
Hmm, if I put a screw into the 4th actuator hole then I would be making a 250 ton screw cutting machine. That was not my intension there. Thanks for watching.
@@frankishrebellion9479 maybe watch the mold open again around 13:00
YOUR MOLD PROTECT IS NOT SET CORRECTLY. MOLDING FOR 20+ YEARS, AND WE USE A BUSINESS CARD. IF THE TOOL LOCKS OVER ON IT, WE CAN GET WROTE UP, POSSIBLY FIRED. YA IT WORKED THE SECOND TIME, BUT STILL SHOULD NOT HAVE LOCKED OVER THE FIRST TIME EVEN IF THAT TUBE WAS WARM AND SOFTENED. BUT I ALSO DEAL WITH 500K TO 2.5 MILLON DOLLAR TOOLS.
Can you design me an plastic Injection Mold for my product?
Yes, pls send an email ( at end of video)