On your control panel buttons look for the one that looks like a book. Press that until the highlighted selection talks about adjusting the clock and everything. I believe in that section you will find where to change from Celsius to Fahrenheit. I hope that helps you. By the way, I drive one of these trucks on the daily. I love my komatsu HM 400. It's a real Hoss
That seat switch by your left leg that goes up and down controls how much cushion you have when you hit bumps. The further up it goes the more travel you will have. Push it all the way down and the seat has very little up and down action. Just a little tip.
1. Park brake when dumping. 2. Rev engine to 1600 rpm when raising bed. 3. Pull away from pile when dumping. 4. Pop the dump lever while pulling away to loosen material that may be stuck in bed (especially when raining). 6. Phone not in hand when driving. Other than that, good work.
@@miyamotomusashi6411 Before you turn around see where you want to dump, then get that place in your mirror, get as straight as you can, then back to that hole you want to fill. When the spot isn't visible in the big mirror, use the small one until the spot comes back into the big mirror.
In the UK 18-19 pound seasonal work thoe want be any jobs through winter in the UK that is. Better of with the 360 excavator pays more and work all year in my country anyway. Good luck with whatever machine you chose
On your control panel buttons look for the one that looks like a book. Press that until the highlighted selection talks about adjusting the clock and everything. I believe in that section you will find where to change from Celsius to Fahrenheit. I hope that helps you. By the way, I drive one of these trucks on the daily. I love my komatsu HM 400. It's a real Hoss
This is my reality I love this keep the good work much love ❤❤❤
That seat switch by your left leg that goes up and down controls how much cushion you have when you hit bumps. The further up it goes the more travel you will have. Push it all the way down and the seat has very little up and down action. Just a little tip.
im thinking a little more like 1 and 3/4 of paper lol good video
Cool well done Tom!
1. Park brake when dumping. 2. Rev engine to 1600 rpm when raising bed. 3. Pull away from pile when dumping. 4. Pop the dump lever while pulling away to loosen material that may be stuck in bed (especially when raining). 6. Phone not in hand when driving. Other than that, good work.
Any tips for lining it up when reversing New driver thanks
@@miyamotomusashi6411 Before you turn around see where you want to dump, then get that place in your mirror, get as straight as you can, then back to that hole you want to fill. When the spot isn't visible in the big mirror, use the small one until the spot comes back into the big mirror.
Put it in neutral and hold the brake and the other foot with the gas to pump the rpm so you aren't abusing the parking brake.
Good video. Well done. By the way, it's called an air ride seat. You're a good driver. Keep up the good work
🙂👍
Good machine
They grumble so beautifully
nice video bro. do you mind telling me how much they pay hourly? I’m planning on getting my certificates and join in.
it’s going to depend a lot on if you’re union or not plus pay varies across states
In the UK 18-19 pound seasonal work thoe want be any jobs through winter in the UK that is. Better of with the 360 excavator pays more and work all year in my country anyway. Good luck with whatever machine you chose