@Bills BuildAll Motorcycles have the gas tank mounted above the engine ALL the time. As long as your float needle and seat are in good condition, it will not be an issue.
Argh, I gotta wait another week to hear it run!!! 😆 Boy oh boy, I know how long this part of the process takes.... The last 20% of a build takes 80% of the time... Keep it up guys!!
I would suggest you mount a fire extinguisher between the seats with the nozzle pointed at the motor. With that gavity feed fuel tank and all the movement hoses can slow come off and leak all over. Remember when RedBeard BBQed his buggy.
Congratulations Joe and thank you to the rest of the guys for all the hard work you out into the videos for all of us to enjoy while you are in college!! Keep up the hard work!
I am wrapping up my fuel tank fab on my ninja build . I thought you might want to keep the stock airbox , I tried using velocity stack setup , CV carbs just need that stock airbox . have fun with the wiring, it was a challenge for me. The build looks great
Have you guys considered a watts link in liu of that panhard bar on the rear? It would provide way beter handling and looks liek it would be easy to implement on the duece.
You guys are really rocking with this build. I was watching you guys put the rear end back on and noticed it’s only attached by the big eye bolt to the frame? I’m sure you smart gentlemen have thought of this but if your trying to grab traction or really hard on the throttle, is the rearend goin to kick sideways? Looks a bit out of control if ya know what I mean? You wanted flexibility to really help with goin where you want but isn’t it goin to be a bit wonky ?? Just saying guys.
If that's a thermostat in the middle of that upper hose you might want to either make sure it has an internal bypass or install a bypass hose so it doesn't overheat waiting for it to open.
the radiator fan is supposed to blow towards the motor pulling colder air from the outside not viseversa because you will pull hot air from the engine and run hot all the time!!!!
Congratulations on the Degree.!Dancing gets a B+(No spins).Not even going near the"Allota pipe to put..">The Top radiator hose doesn"t come from the OUT of the motor,in back,and the bottom feeds the top?
Don't forget to gusset the roll bar in every portion that's above you like your belly button your belly button and up needs to have Dustin so I can tell that there's none up there but the lower portion looks like it has some nut roll bars not very big so you definitely need to strengthen it with some gussets good job though guys are doing awesome with this really cool
I'm going to tell you guys right now that fuel petcock is not going to be enough flow for that motor we're having an issue with a Polaris Sportsman 500 where the fuel flow coming from that exact fuel tank is not enough for the engine to run properly at high RPM we changed the fitting and put a nipple on it and an inline filter and it works a lot better
Kinda wish there was a way to modify the carbs on that engine to be better without spending 800 dollars on a makuni... i love my ninja but she could use just a few more mph.
We were super busy with finals last week and Joe graduated! From here on stay tuned for weekly uploads every Sunday at 9pm central!
@Bills BuildAll Motorcycles have the gas tank mounted above the engine ALL the time. As long as your float needle and seat are in good condition, it will not be an issue.
Congrats joe! 👍
Been looking forward to this and please put rubber under the fuel tank mounts thank you
Argh, I gotta wait another week to hear it run!!! 😆 Boy oh boy, I know how long this part of the process takes.... The last 20% of a build takes 80% of the time... Keep it up guys!!
I would suggest you mount a fire extinguisher between the seats with the nozzle pointed at the motor. With that gavity feed fuel tank and all the movement hoses can slow come off and leak all over. Remember when RedBeard BBQed his buggy.
FIRST!!!!!👍
rather B welding haha I see you man 💯 thx for the love 🤙🏻
You guys all rock! ✌
Good job me brother
Congratulations Joe and thank you to the rest of the guys for all the hard work you out into the videos for all of us to enjoy while you are in college!! Keep up the hard work!
11:27 nice crocs
I am wrapping up my fuel tank fab on my ninja build . I thought you might want to keep the stock airbox , I tried using velocity stack setup , CV carbs just need that stock airbox .
have fun with the wiring, it was a challenge for me. The build looks great
It's looking good guys.Cant wait to hear it run.
Have you guys considered a watts link in liu of that panhard bar on the rear? It would provide way beter handling and looks liek it would be easy to implement on the duece.
I'm seeing some serious welding skills.
grainding velds with open carbirators very smart
Dude you think it’s time for a haircut or maybe that’s the style that in Texas love the build keep working hard guys
Keeps the slag from burning your scalp lol. In the summer when my hair is short I have to wear a hat or welding cap
You guys are really rocking with this build. I was watching you guys put the rear end back on and noticed it’s only attached by the big eye bolt to the frame? I’m sure you smart gentlemen have thought of this but if your trying to grab traction or really hard on the throttle, is the rearend goin to kick sideways? Looks a bit out of control if ya know what I mean? You wanted flexibility to really help with goin where you want but isn’t it goin to be a bit wonky ??
Just saying guys.
Daniel looks like the lead singer of RATM.
That little radiator fan is cute lol
If that's a thermostat in the middle of that upper hose you might want to either make sure it has an internal bypass or install a bypass hose so it doesn't overheat waiting for it to open.
Haters gonna hate! Hair looks good, dance moves on point, and buggy lookin fly. 🤘 💯
Thanks, guys.
Finally, been waiting and wondering when you would upload the deuce video.
Paint it a bright colour Happy holidays fellas
What type of welding do you guys do?
the radiator fan is supposed to blow towards the motor pulling colder air from the outside not viseversa because you will pull hot air from the engine and run hot all the time!!!!
Sweet can't wait to see it done
Congratulations on the Degree.!Dancing gets a B+(No spins).Not even going near the"Allota pipe to put..">The Top radiator hose doesn"t come from the OUT of the motor,in back,and the bottom feeds the top?
So how's the shifter works
Damn good work
Why do you have the hot rad close to the carb air intake cool air makes more power
The effect would be negligible.
Don't forget to gusset the roll bar in every portion that's above you like your belly button your belly button and up needs to have Dustin so I can tell that there's none up there but the lower portion looks like it has some nut roll bars not very big so you definitely need to strengthen it with some gussets good job though guys are doing awesome with this really cool
Now I wish I didn’t sell my yerf dog spider box 😂
I'm going to tell you guys right now that fuel petcock is not going to be enough flow for that motor we're having an issue with a Polaris Sportsman 500 where the fuel flow coming from that exact fuel tank is not enough for the engine to run properly at high RPM we changed the fitting and put a nipple on it and an inline filter and it works a lot better
it doesn't mater if the fan is pulling air or pushing it through the rad
Kinda wish there was a way to modify the carbs on that engine to be better without spending 800 dollars on a makuni... i love my ninja but she could use just a few more mph.
Guys, what's that intro song? I loved it!
It is good, the songs in the description
Drinking game: every time they say "basically".
Build break repeat I have a question to ask you what is you intro song because I love it just like your videos
Jimmi by Andrew applepie
Please take a welding course......please
Your gas tank brackets will eventually break off
Just get rid of the air box a Use k&n air filter
Then they would have to re tune the carbs.. Not worth it, won't gain any power.
William Jenssen not for hp but for clearance
Such a goofy wig!
Dude wheres your self respect ? Get that mop sorted out !
No way im first!