Making an Enclosure for Gema Powder Coating Gun Main Board.
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- This video demonstrates how the Powder Coating power supply controls the kV and uA output of the gun. This is a main board of a Gema powder coating gun as seen on Ebay that I repaired, and reverse engineered to show you the circuit schematics. Below are links to 2 previous related videos:
Reverse Engineering the Gema Powder Coating Gun Main PCB (Part 1)
• Reverse Engineering th...
Reverse Engineering the Gema Powder Coating Gun Main PCB (Part 2)
• Reverse Engineering th... - แนวปฏิบัติและการใช้ชีวิต
Great video as always Phil.
Hi Eddie, Thanks. I still have one more video of the DIY gun to upload. After that I'll start working on powder coating my motorcycles with my DIY gun. So I'll make a blasting cabinet and a bigger oven. That is the plan this year.
@@DIYPhil Hello, i am very excited for those videos! I Have been following the jurney for some time now and i want to build a powder coating gun myself when i have time! Greetings!
@@user-gx1sv3hj9k Hi. I think this will be the last DIY gun that I make, the one you will see towards the end of the video. Further improvements could be 3D printing a proper powder coating gun but I'm only into using recycled materials. Some viewers sent me photos of their DIY gun and a lot of them are really creative. Like somebody make a DIY powder coating gun out of a TIG torch, or somebody else using a spray gun.
Thanks
Welcome
always enjoy your videos
Thanks. Honestly, I think my videos like this one is not really entertaining so not many people will want to watch. Especially now that TH-cam algorithm is pushing more on TikTok style contents. If there is even one or two audience that appreciate my work, then I will continue to share my hobby to TH-cam.
@@DIYPhil we may be few, but we are strong. I bought one of those kits. Ended up using two different ac to dc transformers. I think I have the voltages wrong. I like your dual voltage controllers off the power source. Genius.
If I have a SMPS that can be turned down to 18 volts, then I don't need to have the additional DC-DC converters. A series resistor can be connected to the solenoid valves to that they will still get 12 volts from the main 18 volts supply.
Can use mobile repairing power supply
Any adjustable voltage DC power supply should work
เยี่ยมครับ
ขอบคุณครับ บอร์ดนี้มาจาก Freestyle Racing เขาเปลี่ยนบอร์ดของลูกค้าบอร์ดนี้เสียผมซื้อจากเขาแล้วซ่อมแซม
@@DIYPhil พี่ครับตัวปืนที่พี่สร้างจาก mini Coil 15KV ,Version ก่อนหน้าจากที่พี่ใช้งานมาจนถึงปัจจุบัน พี่เจอปัญหาอะไรบ้างไหมครับ
@@DefFBC ทรานซิสเตอร์ BJT เสียง่ายครับ เวอร์ชันต่อไปก็เลยใช้ MOSFET และคอยล์จากชุด 20kV
@@DIYPhil ตัว mini Coil 15KV 2 ตัวที่พี่เท Eproxy ลงไปไม่มีอาการขดลวดช็อต เลยใช่ไหมครับ
@@DefFBC อ่าใช่ครับอันนั้นทำงานได้ดี