How I built a Roll Over Jig/Rotisserie for the MK1 Rabbit Project
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- I needed a roll over jig to get to the underside of the rabbit to clean all the undercoating and get it as neat as possible before going to the sandblaster. After a bit of research and getting a few tools I dove right in. It's not the prettiest but it works well!
Purchase List:
1.750 X 1.750 X 0.065 SQUARE 48.00 Inches X2
0.750 X 0.095 ST DOM TUBE 12.00 Inches X1
1.000 X 0.095 ST DOM TUBE 12.00 Inches X1
1.500 X 1.500 X 0.125 ANGLE 43.00 Inches X1
1.500 X 1.500 X 0.125 ANGLE 40.00 Inches X1
1.500 X 1.500 X 0.125 ANGLE 15.00 Inches X10
2.000 X 2.000 X 0.065 SQUARE 54.00 Inches X4
2.000 X 2.000 X 0.065 SQUARE 40.00 Inches X2
Costed me $265 with local pick-up.
My Pivot point was 41.5" off the ground. Depending on how long your distance is to the bumper mounts these numbers can fluctuate. But mine was about 12". Check on CAD to be sure I recommend.
Follow me and the build:
Instagram: @TopSecretR35 / / topsecretr3. .
Twitter: @TopsecretR35 / / topsecretr35
Facebook Page: TopSecretR35
Disclaimer:
Due to factors beyond the control of TopSecretR35, I cannot guarantee against improper use or unauthorized modifications of this information. TopSecretR35 assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. TopSecretR35 recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of TopSecretR35, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not TopSecretR35.
That is a crazy build! I salute your ambition.
THANK YOU! I need encouragement now more than ever hahah this might be the last restomod i do 🤣
Amazing what a man and a welder can do, nice work!
Thank you! Now the real work can begin! 🤣
I literally can't believe you did this. Woah!
Thank you! Now the real work can actually start!
Love these IRL vids!
Thanks bud! You'll be helping soon!
Impressive man 👌🏻👌🏻
Shot boet! Wish I had the ouens around to lend a helping hand 😅
Smart bro
Awe, shot boss
BIG THINGS BOSS
Nou sal ons werk!
Now the real work begins. SEE DESCRIPTION FOR PURCHASE LIST AND OTHER INFORMATION! REACH OUT IF YOU HAVE ANY QUESTIONS. I WILL DO MY BEST!
When you are welding your torch angle isn't correct. You should do a maximum of a 10° push and minimal puddle manipulation. Your settings also do not seem to be correct. Those tack welds are too cold and not properly fused in (setting for tacks is supposed to be hotter than welding) also when welding square tubing what you should do is tack weld the corners so you can actually get a decent weld bead across.
Thank you for the tips! I've gotten slightly better since this but always learning.
@@TopSecretR35 no problem bro I'm going to build a rotisserie for my ej1
Brilliant stuff. Do you have the plans/dimensions please?
Hi, give me a day or so. I'll compile what i bought and crucial information into a pinned comment or description. Thanks for watching!
HI! Sorry that took so long, see the description for the metal that I bought. Let me know if I can help with anything else.