I had about 4 different turbo on the car currently have a Garrett gtx3071r gen2 with a billet compressor wheel in this video the turbo is a Garrett t3/t4e 45 trim
The pistons are 20 over the rods are the same hight at stock I believe my block is a tall deck block so it has the longer connecting rodsBut I can’t remember off the top of my head
@@NorthernPerformanceGroup I have a jetta gls 1996 2.0 8v everything is stock all original I want to make it turbo and I have not found so much information I am from Mexico It's a bit difficult for me to find original compression forged pistons and connecting rods. 82.5mm and 10: 1 compression Any recommendation or opinion with your experience on this subject would be of great help thanks
hi i love your car man!! i have a 96 passat with same engine could you help me pls with some parts advice and what kind of injectors and fuel pump did you used any help is appreciated. again great car
I just purchased a VW GTI GOLF 98 2.0L I would like to turbo the little baby. Any chance you can get in touch with me and inform me a little bit about the build, specific parts and what not?
2595cjp hey man get in touch with me through my email, Cstevenson275@gmail.com thanks for getting back to me. I'm stoked to hear about the build! I enjoyed your video.
So I've got an obd1 1995 engine and and obd2 1997 gti engine, so I'm planning on taking out the obd1 what setup has worked the best for you with the boost you're running now?
I was just curious as to which state you live in, I am trying to get a 98 jetta gt and if I do and you were close I was gunna if I could get some help.
i don't understand old school,would of been cheaper to drop a 1.8t engine in there, map it and have 210whp with stock engine, do rods ect and shoot for 500
andrew wright aba can make 600 fairly easy if you know what you are doing and if I put a 16 valve head on it I can make 1000 but honestly I really don't care I love my little aba and I'm not a 1.8t fan I actually hate the motor
andrew wright i couldn't honestly tell I replaced everything on the car and some stuff twice or more I probably had a total of $25,000 in the cars including everything eaven new part that have broken and 2 transmission and 6 cvshafts if I don't include all those problems with new parts braking I would have $18,000 total and in just mods around $13,000 that's all very rough estimate and probably on the high side
@@NorthernPerformanceGroup nah broh weak🤣... I got a racing lawn mower guy 😎 it used to do 4mph now it does 58mph downhill with a good tailwind! Using the stock Briggs and Stratton single cyl flatty built to make 2x stock power lol😂😂🤣 not even any boost! And it goes 0-40 faster than a stock 2.0...
What turbo
I had about 4 different turbo on the car currently have a Garrett gtx3071r gen2 with a billet compressor wheel in this video the turbo is a Garrett t3/t4e 45 trim
Ok Thank you
Nice car
what measure of pistons and connecting rods did you use
The pistons are 20 over the rods are the same hight at stock I believe my block is a tall deck block so it has the longer connecting rodsBut I can’t remember off the top of my head
@@NorthernPerformanceGroup I have a jetta gls 1996 2.0 8v everything is stock all original I want to make it turbo
and I have not found so much information I am from Mexico
It's a bit difficult for me to find original compression forged pistons and connecting rods.
82.5mm and 10: 1 compression
Any recommendation or opinion with your experience on this subject would be of great help thanks
@@user-uf7ct8ks8e it’s 10.5:1 comp my engine with a head gasket spacer
Nice ;)
Those 165hp are at the fly or at the wheel? What boost was you runing at those numbers? Cheers ;)
M Cunha wheel hp
hi i love your car man!! i have a 96 passat with same engine could you help me pls with some parts advice and what kind of injectors and fuel pump did you used any help is appreciated. again great car
Ivan Bossi yah shure thing sorry I never responded sooner I never I never got Notified that someone message me
Walbro 255 fuel pump Bosch 440 cc injectors 276 cam k1 H Beam connecting rods Wiseco 9:1 pistons tt big valves amazon cast turbo manifold Garrett turbo
Also arp head studs and arp main studs
I just purchased a VW GTI GOLF 98 2.0L I would like to turbo the little baby. Any chance you can get in touch with me and inform me a little bit about the build, specific parts and what not?
Chris Stevenson yah man no problem my car is a bit of a crazy build I'm shooting for 400 hp ATM
2595cjp hey man get in touch with me through my email, Cstevenson275@gmail.com thanks for getting back to me. I'm stoked to hear about the build! I enjoyed your video.
Sorry my I have been swamped with work I will try and email you my parts list as soon as I can
hey man also what size tires and rims do you have ? i like the thick look thanks!!!
I love the new build bro, hit me up I'd like to bounce some ideas off of you on these aba motors
Daniel Smallwood ok what's up
So I've got an obd1 1995 engine and and obd2 1997 gti engine, so I'm planning on taking out the obd1 what setup has worked the best for you with the boost you're running now?
Daniel Smallwood obd1 is a strong engine I'm running 22 psi on an obd2 block tho
I was just curious as to which state you live in, I am trying to get a 98 jetta gt and if I do and you were close I was gunna if I could get some help.
MASSIVE 2SMOKER I live in Canada
The Speedo is in km/h soo deiffently not the us
Yo are el mismo proyecto con mi Jetta VR6 :'v espero alcanzar mínimo unos 350hp
i don't understand old school,would of been cheaper to drop a 1.8t engine in there, map it and have 210whp with stock engine, do rods ect and shoot for 500
andrew wright aba can make 600 fairly easy if you know what you are doing and if I put a 16 valve head on it I can make 1000 but honestly I really don't care I love my little aba and I'm not a 1.8t fan I actually hate the motor
2595cjp no problem mate. long as it is what YOU want that's the main thing. how much have you put into the engine so far?
andrew wright i couldn't honestly tell I replaced everything on the car and some stuff twice or more I probably had a total of $25,000 in the cars including everything eaven new part that have broken and 2 transmission and 6 cvshafts if I don't include all those problems with new parts braking I would have $18,000 total and in just mods around $13,000 that's all very rough estimate and probably on the high side
what turbo you using?
Sasuke Uchiha it's a Garrett t3/t04e hybrid 50 trim
2595cjp ohhh ok,I was thinking to use a eBay turbo do I follow the same step
Sasuke Uchiha don't buy an eBay turbo my turbo was $630 US and if you want maximum power from your aba yes do what I did
2595cjp I have a question,that the 1 thing I bought do I still follow that list you
2595cjp and I you could see I use eBay intercooler to
hey man I've got same motor.. with a t3 t4 ar60 turbo. .. I make double what your car makes .. its weak to be honest.. up your boost and run mix..
My car is currently making 400 hp on a engine that made 110 stock
@@NorthernPerformanceGroup nah broh weak🤣... I got a racing lawn mower guy 😎 it used to do 4mph now it does 58mph downhill with a good tailwind! Using the stock Briggs and Stratton single cyl flatty built to make 2x stock power lol😂😂🤣 not even any boost! And it goes 0-40 faster than a stock 2.0...
165? Really
Charles Kirkland the turbo blow up on the dyno and was running crazy rich black smoke was Coming out of the exhaust
@@NorthernPerformanceGroup I see I was going to say my MK3 2.0 slightly modified engine no Turbo does like 215 220
Charles Kirkland my car is making close to 400 now I'm running a really big Garrett ball Bearing turbo
@@NorthernPerformanceGroup nice turbo way down line for me doing rebuild on engine now with mk2 16v heads