Hey Trebor. If truck looses brake fluid without any visible leaks it most likely leaks inside the brake booster. Master or slave cylinders can have internal leaks effecting the pressure as well but it's not very common.
I've replaced the slave cylinder and the master clutch cylinder and still have issues periodically. My clutch fluid gets dirty rather quickly as well. Could I have a small hole or a cracked line
how do you know if its just old gear box oil? My truck clutch is getting soft and difficult to shift into first gear. It can Still shift with car not running. brake fluid levels look topped off. Should I just change the slave cylinder?
I would try to purge air from the clutch hydraulic circuit first then readjust clutch pedal. Btw, I filmed the video how to do it, just need to edit the footage.
I have no idea John. It's getting hard to find them nowadays. I would say do rebuild yourself or give it to your trusted mechanic. If you can find donor truck with good engine that is away to go.
I have Acura TL 6 speed I change the clutch like a week ago n ever since I change it I have difficulty switch gear but when car off it go in gear smoothly
@@PistonShack if I wanna move off I have to put in first n then start it n then when I shift it is very hard to go in gear n then When I come to a stop and hold down the clutch completely the car would still move so it seems like it’s engaging.my think is y it’s not going in gear when start but when off it goes in gear
Just what I needed to see!! I think my wife’s b2600I will be happy again
Very nice, very clear explanation. How is it shifting now?
It's good, shifts like new again!
great video and camera work....thanks very much
Many thanks Bruce! "Firewood Special" Truck back to life)
Nicely done, this was a good watch, cheers 👍
Thanks for the visit
Good walk through thx
You are welcome Keith!
I love those made in Japan small pick up trucks.
You bet!
Can either the clutch master or slave cylinder be bad yet not loose fluid ?
Hey Trebor. If truck looses brake fluid without any visible leaks it most likely leaks inside the brake booster. Master or slave cylinders can have internal leaks effecting the pressure as well but it's not very common.
More Mazda b2600i vids:
MAZDA b2600i COMPLETE CLUTCH FLUID FLUSH & BLEED. th-cam.com/video/J1lrJMP4tYc/w-d-xo.html
IGNITION TIMING MAZDA b2600i, b2200i //4K th-cam.com/video/Bq2KrSdZFXY/w-d-xo.html
HACKS, HOW I REMOVED ALL RUSTY BRAKE LINES AND FITTINGS on MAZDA b2600i project th-cam.com/video/vDtbBxkKkTU/w-d-xo.html
MAZDA b2600i GOT A NEW BED, NEW LIFE // 4K th-cam.com/video/lufuofGqPd4/w-d-xo.html
OIL CHANGE Mazda B2600i, B2200 - ALL SPECS YOU NEED // 4K th-cam.com/video/uQrYt9yBsDk/w-d-xo.html
SIMPLE BRAKE LINES INSTALLATION TIPS. Mazda b2600i Project Truck// 4K th-cam.com/video/TWIDffPWAYc/w-d-xo.html
MAZDA b2600i, b2200i truck - NO POWER, BOGGING DOWN? Check This First! // 4K th-cam.com/video/UBHIzOYzNwE/w-d-xo.html
My Mazda B 2600 I 1993 will not shift when it's running but will shift when it's not running
Most likely truck has issues with master or slave clutch cylinders.
I've replaced the slave cylinder and the master clutch cylinder and still have issues periodically. My clutch fluid gets dirty rather quickly as well. Could I have a small hole or a cracked line
how do you know if its just old gear box oil? My truck clutch is getting soft and difficult to shift into first gear. It can Still shift with car not running. brake fluid levels look topped off. Should I just change the slave cylinder?
I would try to purge air from the clutch hydraulic circuit first then readjust clutch pedal. Btw, I filmed the video how to do it, just need to edit the footage.
@@PistonShack awesome. Thank you for the video will watch as soon as its up. I'm subscribed.
what is a good place to buy a used or rebuilt engine for this truck
I have no idea John. It's getting hard to find them nowadays. I would say do rebuild yourself or give it to your trusted mechanic. If you can find donor truck with good engine that is away to go.
@@PistonShack ok thanks for answering my question
Mine is a 1989. The rpms get way high in first gear before Im up to speed to shift into second. All other gears are fine any Idea why?
Hey David. Do you have auto or standard transmission? I guess you talking about AT.
it"s a standard. it lugs a bit to get to 10-12 mph in second.
How do you replace the clutch fork
Hey Kyal! Well, to replace clutch fork you have to drop the gearbox. Clutch fork usually doesn't fail. What's wrong with your truck?
I have Acura TL 6 speed I change the clutch like a week ago n ever since I change it I have difficulty switch gear but when car off it go in gear smoothly
How is clutch pedal works? Seems like your clutch doesn't fully disengages.
@@PistonShack if I wanna move off I have to put in first n then start it n then when I shift it is very hard to go in gear n then When I come to a stop and hold down the clutch completely the car would still move so it seems like it’s engaging.my think is y it’s not going in gear when start but when off it goes in gear
I'd almost guess clutch plate in backwards