This stuff is ahhmazing!! A rinse-less wash with SLICK-X is the way to go. I loved how the one product wrks on the inside and outside of my car and the tires too! No streaks. No scratches! Just shiny! I love this stuff! If you like clean car without all the fuss…with great results you need this!!
This demonstration makes me think this is best Rinseless on the market, just saw Mike g channel demonstrating slick x , so impressive, hopefully you get a high demand, then my wish is that slick x will be available in the uk 🇬🇧.
Thank you for your tutorial. I like your clear bucket, lid, with guard. Where can I buy the battery-powered pressurized sprayer? There are several rinseless washing products: ONR, Absolute, DIY Detail, Koch Chemie Rrw, Mckees 37, Idrosave, Phoenix EOD Hydra, etc. Is Slick-X polymer or surfactant based? Would you suggest using using the sponge, legacy sponge? How long does the protection last before needing to be reapplied? Does it work with most other ceramic coatings? Thank you!!
How is slickx with a sponge (ultra black sponge etc..)? Is it recommended to work panel by panel in terms of pre-soaking? Or is it ok to pre-soak the entire vehicle if in a cool area or in the garage?
SlickX is fantastic with an Ultra Black Sponge! We have a video coming out shortly demonstrating SlickX using a dedicated rinseless sponge. If your car surface is cool to the touch and you're not in direct sunlight, it's okay to work multiple panels at a time. If the solution dries a little in between wet-wiping panels, no problem, just re-spray panel and wet-wipe and it will come right off! The process is nearly the same with a sponge as with microfiber towels. 1). Pre-spray with diluted SlickX , 2) .Wet-Wipe with Sponge, rinse sponge in bucket after all sides are used, slightly ring out sponge for re-use on next panel, and 3). Use Hercules premium microfiber drying towel to dry cleaned panel. Do you prefer a single-bucket or two-bucket system when washing?
Thanks for your comment and your purchase. Great question! No, it's not coated, which is the one of the reasons we chose this Tesla to demonstrate some of the capabilities of SlickX on naked paint. It emulsifies and encapsulates the dirt, and properly lubricates the panel surface to insure a protected contact wipe with a rinseless sponge or premium microfiber towel without worry of micro-scratches. It truly is amazing! As you can see in the video, we did not pre-water rinse the car first. We believe the rinseless solution should eliminate the pre-water rinse stage, even on a dirty, salty, road film covered car. If we can't get a finger nail in the dirt, SlickX can go to work on it safely! Let us know your thoughts when you get your bottle of SlickX. Do you prefer a single or two bucket method? Do you prefer a rinseless sponge or premium microfiber towels to wet-wipe the car surface?
I really want to know what do you use under the car? i would like to clean my car without dropping down the dirty water and I see this is useful but how to collect water to throw it in the right place?
Thanks for watching and leaving a comment. Absolutely true a grit guard is not necessary with this method. We multi-purpose the Phantom Clear Bucket with foam washes so the grit guard remains in the bucket, not to mention the grit guard comes with the bucket. In terms of the amount of solution needed, you can complete the same single rinseless wash with 2 to 3 gallons of water and a SlickX dilution of 1/2 ounce per every gallon of water.
This stuff is ahhmazing!! A rinse-less wash with SLICK-X is the way to go. I loved how the one product wrks on the inside and outside of my car and the tires too! No streaks. No scratches! Just shiny! I love this stuff! If you like clean car without all the fuss…with great results you need this!!
Thank you! It's one of our favorite products in our line up! So many uses!
Great technique 👍👍👍
This demonstration makes me think this is best Rinseless on the market, just saw Mike g channel demonstrating slick x , so impressive, hopefully you get a high demand, then my wish is that slick x will be available in the uk 🇬🇧.
@kevKav5680 Thank you for your comment. We certainly engineered it to do the best job. More demonstrations coming to show off its capabilities.
Where did you get that neat battery operated sprayer????
Harbor Freight.
Thank you for your tutorial. I like your clear bucket, lid, with guard.
Where can I buy the battery-powered pressurized sprayer?
There are several rinseless washing products: ONR, Absolute, DIY Detail, Koch Chemie Rrw, Mckees 37, Idrosave, Phoenix EOD Hydra, etc. Is Slick-X polymer or surfactant based? Would you suggest using using the sponge, legacy sponge? How long does the protection last before needing to be reapplied? Does it work with most other ceramic coatings? Thank you!!
Haven’t seen the Garry dean method in a while, how is it at releasing dirt?
Absolutely fantastic! We're a bit biased, but we think it's the best truly rinseless wash product available in the market.
How is slickx with a sponge (ultra black sponge etc..)? Is it recommended to work panel by panel in terms of pre-soaking? Or is it ok to pre-soak the entire vehicle if in a cool area or in the garage?
SlickX is fantastic with an Ultra Black Sponge! We have a video coming out shortly demonstrating SlickX using a dedicated rinseless sponge. If your car surface is cool to the touch and you're not in direct sunlight, it's okay to work multiple panels at a time. If the solution dries a little in between wet-wiping panels, no problem, just re-spray panel and wet-wipe and it will come right off! The process is nearly the same with a sponge as with microfiber towels. 1). Pre-spray with diluted SlickX , 2) .Wet-Wipe with Sponge, rinse sponge in bucket after all sides are used, slightly ring out sponge for re-use on next panel, and 3). Use Hercules premium microfiber drying towel to dry cleaned panel. Do you prefer a single-bucket or two-bucket system when washing?
@@ripcleanthanks for the response. I ordered some to try out. I typically use one bucket with a rinseless wash.
This is amazing how long it took to burn through the paint!
Hey Nick the proper term for Idiot or Fool Proofing is “Poka-Yoke” 😉.
Very good presentation! You got a like and subscribe from me!
Thanks for watching and taking the time to leave a kind comment. More to come.
Does it have wax or sio 2 in it
Yes. It is SiO2 Infused Ceramic Particles. Here is a link to our product page.ripclean.com/products/slick-x-rinseless-wash
Cool!
How big is the bottle 32oz, i couldn't find it on the website
Thanks for commenting. For clarification on your question, are you referring to the height of the bottle?
Is this vehicle coated sir? My order of Slick-X is on the way, I canoot wait to try it out on my graphene coated vehicle...easy peasy!!!!
Thanks for your comment and your purchase. Great question! No, it's not coated, which is the one of the reasons we chose this Tesla to demonstrate some of the capabilities of SlickX on naked paint. It emulsifies and encapsulates the dirt, and properly lubricates the panel surface to insure a protected contact wipe with a rinseless sponge or premium microfiber towel without worry of micro-scratches. It truly is amazing! As you can see in the video, we did not pre-water rinse the car first. We believe the rinseless solution should eliminate the pre-water rinse stage, even on a dirty, salty, road film covered car. If we can't get a finger nail in the dirt, SlickX can go to work on it safely! Let us know your thoughts when you get your bottle of SlickX. Do you prefer a single or two bucket method? Do you prefer a rinseless sponge or premium microfiber towels to wet-wipe the car surface?
I really want to know what do you use under the car? i would like to clean my car without dropping down the dirty water and I see this is useful but how to collect water to throw it in the right place?
Thanks for watching and for you comment. It's called an inflatable containment matt or auto detailing containment Matt. Hopefully, that helps.
Since no dirt goes in the bucket, you don't need the grit guard. So you won't need as much solution either.
Thanks for watching and leaving a comment. Absolutely true a grit guard is not necessary with this method. We multi-purpose the Phantom Clear Bucket with foam washes so the grit guard remains in the bucket, not to mention the grit guard comes with the bucket. In terms of the amount of solution needed, you can complete the same single rinseless wash with 2 to 3 gallons of water and a SlickX dilution of 1/2 ounce per every gallon of water.
Stupidity.
Why destroy.