PLEASE be careful with Braum seats. They are known to be rebranded Chinese generic seats that collapse in minor fender benders. They may look and feel nice but MANY people who have installed those seats have had experience with them snapping and folding all the way back (on facebook go to any mustang/camaro/whatever car forum and search for the horror stories). AFAIK they are not safety rated at all, and if you can PLEASE return those seats for a brand well known and SFI rated like Corbeau or Sparco. They're affordable, they have good looking seats, but most importantly they're safe!! Good luck on the build otherwise it's turning out great and I'm looking forward to more updates!
Dylan, that’s really coming along great. I highly recommend you take full advantage of the return line provision on the sending unit. The best thing I ever did was install a return line on my Chevelle-no more percolating fuel at carburetor after shut-down due to a hot engine and today’s modern fuel. The constant cycling of fuel means the fuel will be running cooler and less chance of vapor lock and all the other fun things that can happen. Also buy yourself some non-sticky, correct, wiring harness tape. Covering and bundling the new wires will make it look much neater and much more stock.
For the outside.... fine grit sanded top to bottom to take off a little surface rust and then a flat clear coat... Takes the pressure off to get a perfect paint job or even get a crap paint job, and keeps the classic car look without worrying about additional rust issues. God Bless.
Really good job on everything.... You do some really neat work. As a seasoned mechanic I can see the care an pride you take in your work. Keep up the good work!!! Best of luck to you
to eliminate unwanted wires under the hood, put in an HEI ignition system. you can get them on E Bay for about $150.00. easy to install. eliminates electronic ignition box and ballast resistor. i did this on my 76 ramcharger.
Dylan, if you don't have the time to replace the floor pan then wait until you have the time. Don't spend a lot of time on new seats, cables and so on. A rotten floor makes a bad impression. The floor is also an important piece of safety.
The brutally guttural growl from that beast when you lit it off sounded incredible. You should seriously consider installing cutouts. Let that monster roar!!
I clicked the "like" button as soon as I heard that thing fire up in the teaser! Excellent work, as usual. I am eagerly awaiting the delivery of my Dylan McCool t-shirt!
Your truly an inspiration man you really are your young with a old soul I consider myself the same and you just don't meet people like that man!! Great job on this car man can't wait to see more 🏁🏁🏁🏁🏁
Or the fact he didn't completely strip and rebuild it from the ground up like he should have and the fact there are purest that believe you should only restore car back to factory condition but I'm just happy he got it running again love these old car's
idk if you plan on painting it anytime soon but i think raptor lining the whole car or painting it matte black would look really good and the seats look awesome 💯
Hell yeah, I love those Quik-Wire kits! Great product, I've used a few of them, and they're just so nice to work with. Great company, with great customer service. The first kit I used, we actually visited their store in Wisconsin, and they were super cool and helpful.
Hi Dylan. Your car is coming along well and it's all looking very very good. I wish I could buy a new fuel tank for my project car, 1961 Humber Hawk Series II. But they aren't available anymore as far as I have found. I am looking to find something of similar shape and capacity to adapt. I have been enjoying your channel and following your project. I noticed the coating you used for the trunk floor. I have been using paint for farm tractors supplied by John Deere stores to coat parts of my car like the front suspension cross member. I have found it to be quite durable
Maybe a dumb question by why is the vent tube for the gas tank in the trunk isn’t that dangerous? Wouldn’t the fumes also make the interior smell of gas?
Didn*t you have a Plymouth Duster parts car, where those gauges go look like the same type cluster used in the Duster,also that car has or had an under dash A/C unit which you could fit into the Duster or the Dart.
You guys gonna go back to that scrap Yard trying to get more of those cars running? Yall thould try to make an offer on a car there I hate seeing them all sit there lol
you need all new interior like speaker system, new race seat belts, head liner, back seat, carpet, maybe some cool pedals, just make it look like a car on the inside, and be conferrable.
Imagine Dylan, you are walking away from the car and forgot to lock the doors. you have a remote / key fob and yes it will lock the doors remotely and just like a newer car .....blow the horn annoying people around you cause they are wondering who is blowing their damn horn. lol pretty darn funny, I worked for a car rental place and I loved the key fob/ remotes.
Wire am group !!! (LOL) Looking good all the best on getting the next parts done ready for power tour look forward to next video I bet it will sound Great !!!!
Dylan, the car looks great! With all of the new parts, and all of the work you've done! I get the "ratty" look, but after the power tour it would be awesome if you finished the resto mod theme with fixing the interior, and actually painting the car. Personally, I think it would be an outstanding classic Charger...
Nice car. I have a 1969 valiant Ute in Australia. It’s got a slant 6 in it. I’m removing that and putting in a hemi 6. What is your colour code because it looks exactly the same colour as my Ute.
Awesome work! Getting closer and closer! I really like how all the new stuff works together with the going paint. It gives it so much character. Dylan, is it possible for you to put the livestreams into a playlist so people can watch them whenever? I heard if you hide them and put them into a playlist your viewers can still watch them without clogging up the normal video feed.
Hey you're getting it to look pretty damn good and then the outside I just I love the patina it's got there's not too many like that that's not all rotted out
PLEASE be careful with Braum seats. They are known to be rebranded Chinese generic seats that collapse in minor fender benders. They may look and feel nice but MANY people who have installed those seats have had experience with them snapping and folding all the way back (on facebook go to any mustang/camaro/whatever car forum and search for the horror stories). AFAIK they are not safety rated at all, and if you can PLEASE return those seats for a brand well known and SFI rated like Corbeau or Sparco. They're affordable, they have good looking seats, but most importantly they're safe!!
Good luck on the build otherwise it's turning out great and I'm looking forward to more updates!
Looks like you're doing a great job, good to see younger people rescuing old muscle cars
Dylan, that’s really coming along great.
I highly recommend you take full advantage of the return line provision on the sending unit. The best thing I ever did was install a return line on my Chevelle-no more percolating fuel at carburetor after shut-down due to a hot engine and today’s modern fuel. The constant cycling of fuel means the fuel will be running cooler and less chance of vapor lock and all the other fun things that can happen.
Also buy yourself some non-sticky, correct, wiring harness tape. Covering and bundling the new wires will make it look much neater and much more stock.
For the outside.... fine grit sanded top to bottom to take off a little surface rust and then a flat clear coat... Takes the pressure off to get a perfect paint job or even get a crap paint job, and keeps the classic car look without worrying about additional rust issues.
God Bless.
Been gone awhile. Glad to see your still building. Yes, a lot of work, but still a lot to do. Your young so I'm sure you'll make it. Good Luck.
One of my favorite shots is the key turning and the engine starting. You nailed it in the first 3 seconds. Respect!
That trunk pan is simply beautiful.
Love the progress your making keep up the great work
This is got to be the best car rebuild on TH-cam ever!
Really good job on everything.... You do some really neat work. As a seasoned mechanic I can see the care an pride you take in your work. Keep up the good work!!! Best of luck to you
to eliminate unwanted wires under the hood, put in an HEI ignition system. you can get them on E Bay for about $150.00. easy to install. eliminates electronic ignition box and ballast resistor. i did this on my 76 ramcharger.
This video is 8 months old where is the rest
Dylan, if you don't have the time to replace the floor pan then wait until you have the time. Don't spend a lot of time on new seats, cables and so on. A rotten floor makes a bad impression. The floor is also an important piece of safety.
The brutally guttural growl from that beast when you lit it off sounded incredible. You should seriously consider installing cutouts. Let that monster roar!!
I clicked the "like" button as soon as I heard that thing fire up in the teaser! Excellent work, as usual. I am eagerly awaiting the delivery of my Dylan McCool t-shirt!
Your truly an inspiration man you really are your young with a old soul I consider myself the same and you just don't meet people like that man!! Great job on this car man can't wait to see more 🏁🏁🏁🏁🏁
How is there 17 thumbs down??? What is there about the video to make a person want to do that...some people are just strange. Thumbs up from me!
Or the fact he didn't completely strip and rebuild it from the ground up like he should have and the fact there are purest that believe you should only restore car back to factory condition but I'm just happy he got it running again love these old car's
You have come a long way! All the hard work has paid off!! Great work! Look forward to the next video!!
Great Video Dylan!! Thanks for showing us how you were able to accomplish this rescue and transformation. 👍👍
Your tank needs insulators between it and the straps. Any old scrap of rubber that fits,
I have always used bicycle inner tubes. They wrap the straps nicely.
Galvanized Zinc coatings will corrode against the gas tank.
Nice. Still can’t believe that thing has power windows lol
all the hard work has truly paid off.👍👍 job well done dylan.
Jamie Jones love seeing other younger guys work on classics it’s what inspired my channel
Keep them Driving... i daily my 68 Dodge Dart.. even traffic is better in my Claasic..
You should get a thermoswitch and relay to kick on the fan.
Manually switching it on is not reliable at all,you can't get an eye on it al the time.
As mentioned in the video, it's only temporary for the people who were working on my car.
idk if you plan on painting it anytime soon but i think raptor lining the whole car or painting it matte black would look really good and the seats look awesome 💯
This car is just amazing. Every single video is so worth the wait! Great job Dylan, in no time this thing will be completely road ready!
Nice progress
It's come a looking way
Sounds great too
Keep on keeping on
Hope the exhaust is going to be a large diameter " glass pack " system, that's all we use down here in Australia.......
Hell yeah, I love those Quik-Wire kits! Great product, I've used a few of them, and they're just so nice to work with. Great company, with great customer service. The first kit I used, we actually visited their store in Wisconsin, and they were super cool and helpful.
Amazing build but I would of loved to see you take care of some body rust and do a quick paint job on it would be nice
Been waiting for the update! Great job, Dylan! :)
Tolnai János one of the best classic car TH-camrs in my opinion
new seats look so good. is this gonna be a race car?
Keep on keeping on Dylan!!! I'm really enjoying the channel! Thank you so much man!!!
Nice job Dylan great job kid its great to see kid like you doing this my son has the same passions for motocycles most melinals don't have a clue
Love watching your progress on this! 👍🏻👍🏻👍🏻
I agree with Jamie Jones very good job that's going to be an awesome car .
On your channel I love your videos cause there great quality and you never cut corners keep up the great work 😀👍👍
I'd spend a couple of bucks on Dynamat. Good thermal and sound properties.
Once we replace the floor I'll look into some insulation.
Really like how that sounds.
Been waiting for another video. Good stuff!
Those seats look like the suit the Charger perfectly
You had me when I saw the blue D100 doing a burnout 😍
Hi Dylan. Your car is coming along well and it's all looking very very good. I wish I could buy a new fuel tank for my project car, 1961 Humber Hawk Series II. But they aren't available anymore as far as I have found. I am looking to find something of similar shape and capacity to adapt.
I have been enjoying your channel and following your project.
I noticed the coating you used for the trunk floor. I have been using paint for farm tractors supplied by John Deere stores to coat parts of my car like the front suspension cross member. I have found it to be quite durable
Maybe a dumb question by why is the vent tube for the gas tank in the trunk isn’t that dangerous? Wouldn’t the fumes also make the interior smell of gas?
Looking good and looking forward to the rest of the project! 👍🏻
Didn*t you have a Plymouth Duster parts car, where those gauges go look like the same type cluster used in the Duster,also that car has or had an under dash A/C unit which you could fit into the Duster or the Dart.
Great job with the progress you've made recently on the Charger! Has your dad made any decisions regarding the Warlock project?
Nothing yet!
Great video Dylan!! I have that 68 Charger that's on your T shirt as my desktop picture lol.
Great job man the car is coming along lots of hard work paying off and will be so cool on the tour
Nice update! Loving this project and channel!
Really making good progress, man! Gonna be *so* sweet when it's all finished. Lovin' it!
You guys gonna go back to that scrap Yard trying to get more of those cars running? Yall thould try to make an offer on a car there I hate seeing them all sit there lol
Cant wait to see more! Great job Dylan
That car is soo badass!
I can't wait until see all your videos of your charger you got the chargers to sound good I can't wait and see the color of your charger
Love those old Mopars! You're doing a fantastic job on this one!
Mopar to ya lol lol ... my dad and brother were Mopar fans, 4 trucks and 5 cars over the years FWIW
you need all new interior like speaker system, new race seat belts, head liner, back seat, carpet, maybe some cool pedals, just make it look like a car on the inside, and be conferrable.
Hi.....Dylan.....are you going to paint it? When? What color? Good job........
Imagine Dylan, you are walking away from the car and forgot to lock the doors. you have a remote / key fob and yes it will lock the doors remotely and just like a newer car .....blow the horn annoying people around you cause they are wondering who is blowing their damn horn. lol pretty darn funny, I worked for a car rental place and I loved the key fob/ remotes.
keep up buddy, very nice job, i really can fell a vibe of rebuilding this car, nice!!! THIS CAR NEED A NAME!!!!!!!!NAME IT!!!!!!!!
Continue Charging ahead with the Charger... I enjoy your videos.
Wire am group !!! (LOL) Looking good all the best on getting the next parts done ready for power tour look
forward to next video I bet it will sound Great !!!!
Well done! Overall, I’m loving the look of this car...paint and all. 😎👍
The Daninator agreed you can’t recreate patina you can always paint the car later if he really wants
Dr. D here sunny Canada does you know what fan blades like to eat? timing light leads and trouble light cords. Ps. not a real doctor
Dylan, the car looks great! With all of the new parts, and all of the work you've done! I get the "ratty" look, but after the power tour it would be awesome if you finished the resto mod theme with fixing the interior, and actually painting the car. Personally, I think it would be an outstanding classic Charger...
Nice car. I have a 1969 valiant Ute in Australia. It’s got a slant 6 in it. I’m removing that and putting in a hemi 6. What is your colour code because it looks exactly the same colour as my Ute.
Oh yeah! The sticker! I forgot about it. I'll go put it on right now. (also the DMV sticker too)
Im getting excited cant wait to see you on the tour
Awesome work! Getting closer and closer! I really like how all the new stuff works together with the going paint. It gives it so much character.
Dylan, is it possible for you to put the livestreams into a playlist so people can watch them whenever? I heard if you hide them and put them into a playlist your viewers can still watch them without clogging up the normal video feed.
that original green is nice some sanding and body work it will be even nicer.
Really like how it looks, really, really like it
damn it i was expecting a second part but just realized you posted this video today.
What’s gonna happen to the 383 that you pulled from the charger
Where are you going to be coming to in Ohio? And what is the event called?
Hey Dylan you are doing a great job with that charger.
Are you keeping it automatic or are you manual swapping it? totally fine either way just curious
Don’t forget an accessory power source so when your on the road you can charge your phone, gps and what not.
Hey you're getting it to look pretty damn good and then the outside I just I love the patina it's got there's not too many like that that's not all rotted out
Aren't those straps supposed to have something for anti chafing?
How is that bed liner spray as an anti rust sealant for. A rust protector
How much did the engine build cost?
What happened with the 1963 Impala that you made a video about?
Wow ! I Love featured viewer Skip's Plum CraZy 70 Satellite convertible !!
Do you got any links för the wire kit? 😁
Nice job Dylan enjoy the vids 👍
Looking good, sir!
This is such a cool project. Love reborn MOPARS.
Are you going to maybe clear coat seal the car?
Its looking and sounding good. What part of Ohio are you going to be in?
Going good, looking forward to seeing more.
It looks awesome man!
Wish I had power windows!
Looks Beautiful Awesome job
Looking good Dylan !
Car sounds good!
Hey Dylan good video thank you for it and it looks good it's getting there
Hey Dylan I own and old 1986 dodge d150 custom pick up and it's for sale I think it would look great in your collection!
LineX the interior
and the under body of the cahrger
it will not only look nicer but it will be more durable then paint. .
should you put modern hellcat engine.
awesome video