ฝัง
- เผยแพร่เมื่อ 21 ก.ค. 2024
- In this video I show you how to recover a Cisco 3560 which is not booting due to a missing or corrupt firmware image.
IOS Images (Offical): software.cisco.com/download/r...
IOS images (mirror): cisco.server.adamxp12.com/file...
Video Info
Recorded: totally forgot
Mic: BM700
Editing Software: DaVinci Resolve 14
Video ID: 0011_89_basinator_resolve
Render Time: 6 mins - วิทยาศาสตร์และเทคโนโลยี
THANK YOU!! Your video saved my butt (and my switch)!! Very simple, easy-to-follow instructions.
thank you!!! Your guide saved my c3750. Super and simple guidance.
ThankYou boss , Right now I have just recover my official switch ISO. Tnx again
i have took cisco 2020 !! just saved my life thank you
Thanks a lot! I rescued my real studies practices with your video
I just wanted to say thanks for a terrific video! Worked perfectly. You saved my butt!
No problem. I am glad to hear this video helped :)
So helpful, got a switch of ebay and this is exactly what i needed!
thanks a lot after many trial i got this video and fixed my issue thanks again .keep it up Ur posting
Thanks for showing us, this video is very useful for me... big thanks
Thank you thank you thank you!!!!! Helped tremendously :) subbed
Thank you very much! Your video helped me a lot! Thank you!
thanks a LOT for this. Helped a lot!
I solved a big problem thanks to you.
Life saver! Thank you mate
Man!!! Tysm 😊💝💝
I've got a slight problem? After a while it can only transfer 128KB, any fix?
Thanks for this !
When I type the "enable" command I get (Unknown cmd: enable) Can anyone tell me why I am not able to change to privileged mode "switch#" prompt when I type enable? What would cause it to not recognize the enable command?
THANK YOU!!!
Very strange : get this message after running copy xmodem: flash:cat9k_lite_iosxe.16.12.01.SPA.bin Then I get : Unsupported destination device/filesystem bit it shows the flash directory
supported filesystem(s):
flash: flash
usbflash0: front-panel USB 0
usbflash1: front-panel USB 1
I am trying to restore my Cisco 3560G using the .tar file instead of the .bin file and working web interface via HTML folder files. I was hoping this video would have shown how to restore IOS using the .tar file instead of .bin file and then how to extract/uncompress the .tar file within Flash. I kindly ask to please consider doing another video that shows how to do these things. Thank you so much.
Cisco has removed access to all of older IOS unless you have an organizational contract with them. What a shame! Anyone knows where to get the latest or most reliable IOS for C3750G-48PS?
2500 cisco router - i set config-register 0x3922 - but now i cannot access router via hyperterminal i get a (x) showing or flashing curser - nothing else
anyone help ?
im trying to copy ios from tftp server as cisco 2500 ios is probably corrupt
Thank you so much!!!!!!
Why you request it to be sent and not recieve ?
If you get time could you upload a video on how to re-load the "HTML" folder ? thankyou
the Cisco 3560 can not have the web pages uploaded as the is not enough space. only the 3560G can. I dont have said switch so cant really show that
Personally the web UI is kinda useless anyway. if you want a web managed switch get a HP 1810-24G, fanless and web managed. or a Cisco SG300-28 also fanless web managed but also layer 3
thank you bro
Your mirror link in the description is broken ( ends up at 404 )
Hi, I'm new to Cisco, thanks for this video it worked like a treat. Can you point me in the right direction for getting the webservices going?
What if..... I cannot even..
"dir flash:"
"flash_init" fails.
"format flash:" fails.
"fsck flash:" fails.
And it says bad areas in flash?.
Afraid that likely means you have a faulty mainboard. Had a Cisco 1142 that wouldnt boot and I couldnt reflash it with the same bad areas issue.
how do you do this via putty?
i killed my 2960 and now its working again...thank goodness
is for Switch 3560-CX?
yes bro
Что не поняла