I've always been fascinated how Andy's tone can lean towards being dark though it somehow cuts through. Regardless how he does it, it's a tone that's among the best ever. You could eat it with a knife and fork.
It's the Dimarzio cruiser bridge in the neck position, which has less sparkle than a typical strat neck, but still sounds amazing, combined with his dual delay, which has tape distortion effects, which really adds to the "darker" sound. I have the same setup and with a driven Fendery style amp, and his pickups and similar delay, you can get really close to his sound. The pickup in this demo is too "fuzzy" sounding.
Thanks for this rundown. I've been looking for a Timmons-esque tone for ages, but I could never make the Lonestar model in my HX Stomp work for me. The key was turning the bass all the way down, as demonstrated here. Another noticable part of his tone is that he runs his compressor after his drive. It adds a lot of that spongy quality to his attack, in my opinion. Real shame there's no Blues Driver circuit in the Helix. No BB preamp either. I got close enough for my needs with the Prince Of Tone and the DOD 250 Preamp models.
i had no idea he turned the bass all the way down on the amp, ive watched loads of his tone demos and never stopped that! Nice one Jon.. ill be making some tweaks tonight ;-)
If you are on the latest beta for the Fm3 there is the Aurora delay in the multitap delay block which is emulating the Keeley Halo . It’s pretty amazing Love your videos Cheers
I Downloaded patches for FM9. I was dealing with a phasing problem when dual amps are being used and you wanna turn off one of the amp blocks. After sometime I discovered that amp blocks have to be set to mute or else signal goes thru them when they are off causing this out of phase problem. Hope this helps somebody!
It's his ambient clean tone I want to dupe. He puts a delay into a delay to get that 'ethereal' all-over you reverb that sounds like it exists before the note was even picked. Was it Strymon that made him his delay? I can't remember now. I've approximated it on my HD500X but it's not quite right and I'm no AT.
In my opinion the best way to get the Halo sound (in the Helix at least) is not to use a dual delay, but to run two delays in series. I believe that's what the Halo does, is run a dotted 1/8 into a 1/4, rather than running them in parallel. I use two tape delays with the wow/flutter turned up fairly high. I've found it gets really close to the pedal, since the repeats are feeding into each other to get that "almost reverb" sound.
Great work as always man! I've been trying to think how he gets his sound since that pedal show where he made Dan cry with his two lone stars one being slaved to another... how does that work when plugging both in one mesa 2x12? I'm assuming he has maybe a cab switcher or load box to handle that load? Would love your thoughts on this! Thanks man
Hi John. Could a similar result be achieved(in terms of how you chose the el34 tubes) on the ampero? I'd be running a superstar clean preamp(Lonestar clean channel preamp) into the el34 Poweramp sim on the ampero. Is that essentially the same as what you're doing here?
Hi John great video as always! Can I ask you which differences are between your 3 package of patch for hx stomp that we can buy from you? Another question, did you ever try acoustic patch with the hxstomp and an acoustic guitar? If you did it, which setup did u recommend us? Have a good day! :)
He uses a dual compressor. One more as a boost and the other with more compression. Couldn’t you put the compressor as dual in one block, and then same with the drives?
I've always been fascinated how Andy's tone can lean towards being dark though it somehow cuts through. Regardless how he does it, it's a tone that's among the best ever. You could eat it with a knife and fork.
It's the Dimarzio cruiser bridge in the neck position, which has less sparkle than a typical strat neck, but still sounds amazing, combined with his dual delay, which has tape distortion effects, which really adds to the "darker" sound. I have the same setup and with a driven Fendery style amp, and his pickups and similar delay, you can get really close to his sound. The pickup in this demo is too "fuzzy" sounding.
My God Son, that introduction was incredible. Sounds so damn soulful
PERFECT TONE! Wow! This is the exatly tone I have in mind!!
Thanks for this rundown. I've been looking for a Timmons-esque tone for ages, but I could never make the Lonestar model in my HX Stomp work for me. The key was turning the bass all the way down, as demonstrated here.
Another noticable part of his tone is that he runs his compressor after his drive. It adds a lot of that spongy quality to his attack, in my opinion.
Real shame there's no Blues Driver circuit in the Helix. No BB preamp either. I got close enough for my needs with the Prince Of Tone and the DOD 250 Preamp models.
i had no idea he turned the bass all the way down on the amp, ive watched loads of his tone demos and never stopped that! Nice one Jon.. ill be making some tweaks tonight ;-)
We still need a BD-2 Blues Driver model in the Helix
If you are on the latest beta for the Fm3 there is the Aurora delay in the multitap delay block which is emulating the Keeley Halo . It’s pretty amazing
Love your videos
Cheers
Love your videos. Your playing is amazing as is the tone from your presets.
man your feel is ubelievable🤯🤯🤯
Love your phrasing man, so beautiful.
Congratulations for your tone and great playing. 🎸🔥 you really nailed it
nice take on Crying by Andy ;)
Hoping for a new 3.5 version of the AT preset build on the HX when you get to it 😅
I have a similar tone on my amplifirebox mkii , with the rumble brite model , very holdsworthy with a modern twist
I Downloaded patches for FM9. I was dealing with a phasing problem when dual amps are being used and you wanna turn off one of the amp blocks. After sometime I discovered that amp blocks have to be set to mute or else signal goes thru them when they are off causing this out of phase problem. Hope this helps somebody!
Andy's tone is my all time favourite !
Chris Buck style intro. Nice. 👍🏻
It's his ambient clean tone I want to dupe. He puts a delay into a delay to get that 'ethereal' all-over you reverb that sounds like it exists before the note was even picked. Was it Strymon that made him his delay? I can't remember now. I've approximated it on my HD500X but it's not quite right and I'm no AT.
Great intro!!
Love this video any chance you could do one for the pod go?
In my opinion the best way to get the Halo sound (in the Helix at least) is not to use a dual delay, but to run two delays in series. I believe that's what the Halo does, is run a dotted 1/8 into a 1/4, rather than running them in parallel. I use two tape delays with the wow/flutter turned up fairly high. I've found it gets really close to the pedal, since the repeats are feeding into each other to get that "almost reverb" sound.
Any idea how to do this on a THR30 ?
I have line 6 spider V mk2.
What amp modal would you use?
Ese sonido Busco... 😮
Also, I really want an FM-3. Does it have gapless switching between presets like the GT-1k?
No, only between scenes within a preset. Scenes are pretty powerful tho, so this shouldn't be a problem.
Great work as always man! I've been trying to think how he gets his sound since that pedal show where he made Dan cry with his two lone stars one being slaved to another... how does that work when plugging both in one mesa 2x12? I'm assuming he has maybe a cab switcher or load box to handle that load? Would love your thoughts on this! Thanks man
Hi John. Could a similar result be achieved(in terms of how you chose the el34 tubes) on the ampero? I'd be running a superstar clean preamp(Lonestar clean channel preamp) into the el34 Poweramp sim on the ampero. Is that essentially the same as what you're doing here?
Hi John great video as always! Can I ask you which differences are between your 3 package of patch for hx stomp that we can buy from you?
Another question, did you ever try acoustic patch with the hxstomp and an acoustic guitar? If you did it, which setup did u recommend us?
Have a good day! :)
He uses a dual compressor. One more as a boost and the other with more compression. Couldn’t you put the compressor as dual in one block, and then same with the drives?
Hello, tonex??
Anyone else want to reach through the screen and pull the plastic film off of the FM3?
what pickups are on this guitar?
Lollar dirty blondes I think he demonstrated in another video.
@@MrBossei can't find that models
@@guilhordas The video: th-cam.com/video/c4Xzf8KxX74/w-d-xo.html
single coil s 👍🏼
@@RobbenBanks153 i know man. Brand please
Ahh, back to old blue...
It’s never gone for long!
not for my gibson(
Your camera seem to be focussd on your hands.. Set it manually on your face or if you have an advanced camera use eye effect focus.
Keep well
I know there more Helix heros than Fractal fools subscribed to this channel, but thanks nevertheless.
I’m a Helix Hack bro. Definitely not a hero🤪
@@kyran4238 As long as we have fun with the knobs to tweak and hack our modelers, who cares for the brand name.
Where is your parkinson’s head movement?