It's not easy to get all the parts at once. Hi-Capas are very popular and I have had to order from 3 retailers at the same time, and finding a slide in stock took days to find. lol Lots of talking in this vid but still explained a few things in decent detail. Thanks.
Thats a nice build! One thing: it is not too tight for ceracoat? I read it will give a bit to the meat, so a tight fit is a nightmare after it's coated... It went well with this pistol?
yea make sure whoever cerekotes it is skilled and the one providing it as well, so you can figure out how thick you need the coat which will vary per build
Hey, love your videos, i just bought a slide and frame set for my hicapa 5.1 and its a Airsoft masterpiece. I saw that you often use airsoft masterpiece's slide. What your thought on it ? and why my slide is not smoothly travel when i use my standard marui blowback housing ? thankyou :D
I don't mean to make a totally unrelated comment, but have you seen any of the new STI Pistols? They have a whole bunch of new "tactical" pistols. Like the "HOST", the DVC Tactical, and the Costa Carry Comp of course.
Hi, I'm looking to build a Custom TM Hi Capa with almost all, if not all the parts I have seen you & 'Heavy Metal Airsoft' suggest to use in your previous builds. I want to max out for both reliability & FPS Including a 7 inch inner barrel. For consistent FPS and to save loading down time I'm thinking of going HPA tapping with a box mag. Would maxing out the custom build be adversely affected by HPA & box mag other than drying the internals out? Do you have any suggestions, recommendations? - I have, put together a spreadsheet parts list including alternative options. I would appreciate any feedback/advice.
Hey Knuckles. 2 things. The exciting and elusive TM G19 is a gun I'd love to get my hands on. Where and when do you suggest preordering it, if at all? And could you do a video on changing the internals of both a Glock and a hicapa nozzle? Seems pretty easy but I've never seen it done. Thanks.
knuckles what u think of the cowcow bbu i have alot of problems with mine that the nozzle spring like pops out or get shorter after couple shots any tips or vid help ?
do you have a rear sight on? not sure why a spring would pop out if its properly installed with a rear sight, the nozzle spring is just based on what company you buy, but in the end all of the springs will get shorter naturally
thats probably more personal preference because the gun still works no problem even after the frame has been knocked in. it eventually will just stop at the slide.
How much was the faster shipping? If it's in the comments sorry for the repeat, TH-cam is being weird again and not letting me see the comments on this video
it depends on the size you get, but its a big difference versus airmail, $50-75$ is common for me but most of my customers will have big orders or at least a full size pistol in order
Hey Knuckles i was wondering how i can contact you i have a few questions on a build im thinking of doing. How can i contact because i cant find you on facebook.
You should put a part list in your desciption, it would be helpful just to see what you are using.
Make more videos like this. Full build processes. It's great knuckles :) keep it up man. Your rock!!!!
It's not easy to get all the parts at once. Hi-Capas are very popular and I have had to order from 3 retailers at the same time, and finding a slide in stock took days to find. lol Lots of talking in this vid but still explained a few things in decent detail. Thanks.
yo knuckles!
will you do a overview of all your guns?
it would make a nice video, since i have seen some intresting looking guns of yours :D
nah sorry
Lol the one word shut down
Lol
Awesome looking build great job.
can you fit any slide on the stock frame?
love ur vids!!
yea if you are good enough etc
Would you say that you have better pricing on hi capas that tapp airsoft
I can hear your dog snoring! haha
>_
Nice video! Keep it up!
How much for a build like that?
Thats a nice build! One thing: it is not too tight for ceracoat? I read it will give a bit to the meat, so a tight fit is a nightmare after it's coated... It went well with this pistol?
yea make sure whoever cerekotes it is skilled and the one providing it as well, so you can figure out how thick you need the coat which will vary per build
Hey, love your videos, i just bought a slide and frame set for my hicapa 5.1 and its a Airsoft masterpiece. I saw that you often use airsoft masterpiece's slide. What your thought on it ? and why my slide is not smoothly travel when i use my standard marui blowback housing ? thankyou :D
you need to work on the slide more
should i change my BBH to airsoft masterpiece one ? btw thanks for the reply.
Great. Do you know where you can buy raw slides so you can make them custom build?
Probably send an email to alpha airsoft
Thanks
I don't mean to make a totally unrelated comment, but have you seen any of the new STI Pistols? They have a whole bunch of new "tactical" pistols. Like the "HOST", the DVC Tactical, and the Costa Carry Comp of course.
yea they are definitely cool looking thats for sure
16:42 Tell me please, how do you make such a notch on the pistol grip? Do you have such a video?
Dremel and hand sander work well. Also if you have a stationary belt sander
@@KnucklesGSM Thank you very much for your reply! I like your videos! You turned out great TTI STI Combat Master 👏👏👏👍
Hi, I'm looking to build a Custom TM Hi Capa with almost all, if not all the parts I have seen you & 'Heavy Metal Airsoft' suggest to use in your previous builds. I want to max out for both reliability & FPS Including a 7 inch inner barrel.
For consistent FPS and to save loading down time I'm thinking of going HPA tapping with a box mag. Would maxing out the custom build be adversely affected by HPA & box mag other than drying the internals out?
Do you have any suggestions, recommendations? - I have, put together a spreadsheet parts list including alternative options.
I would appreciate any feedback/advice.
HPA will be just fine, nothing beats HPA in terms of consistency. You can just lube the gun and maintain it no problem.
XC1 might be a good light
if they could make a bigger version but the same profile that would be sick because i do like the clean lines on that one
Hey Knuckles. 2 things. The exciting and elusive TM G19 is a gun I'd love to get my hands on. Where and when do you suggest preordering it, if at all? And could you do a video on changing the internals of both a Glock and a hicapa nozzle? Seems pretty easy but I've never seen it done. Thanks.
cant help with that, check airsoft forums , im pretty sure some of my videos take apart loading nozzles, its very simple if anything
knuckles what u think of the cowcow bbu i have alot of problems with mine that the nozzle spring like pops out or get shorter after couple shots any tips or vid help ?
do you have a rear sight on? not sure why a spring would pop out if its properly installed with a rear sight, the nozzle spring is just based on what company you buy, but in the end all of the springs will get shorter naturally
Which slide? AM PT open or just a compensator and barrel set in a standard slide?
What slide did you use?
Can I email you about a project with my AW-HX2201? I don't have Facebook or Instagram.
Thank you
you need to add a hammer pad to the PP package XD
thats probably more personal preference because the gun still works no problem even after the frame has been knocked in. it eventually will just stop at the slide.
true that!
How did u get it that snappy
Good parts and good building
How much was the faster shipping? If it's in the comments sorry for the repeat, TH-cam is being weird again and not letting me see the comments on this video
it depends on the size you get, but its a big difference versus airmail, $50-75$ is common for me but most of my customers will have big orders or at least a full size pistol in order
What rmr mount is that .?? Nice build .!
easy rmr mount by airsoft masterpiece
what scope mount did you use for that pistol. also will it fight to a tm gold match grip and rail?
that was an easy mount that we bought from alpha airsoft, not sure if they still have some in stock.
KnucklesGSM do u know what the mount is called?
Should be "Easy Mount Red Dot" or something like that. Check on a-airsoft.com
Hey Knuckles i was wondering how i can contact you i have a few questions on a build im thinking of doing. How can i contact because i cant find you on facebook.
What is EMS shipping???
does it mean Express Mail Shipping?
yea
You wouldn't happen to have a performance package for a glock 17 or 18 specifically a we tech or tm platform
I’m looking for an outer barrel like that what is it called?
compensator barrel from alpha airsoft
Hello
How can i fix a double trigger issue ?
Thx
search on my channel for double trigger issues, i have a video on it
hi Knuckles, how much fps can u get in this build? thank you!
7inch you can break 400fps no problem with .20s on a hot day
Is it possible to get TM Glocks sent to the US?
check airsoft forums, people should be able to help there
Nathan Lee i hope your joking.
Can I buy fiber optic sights from u for a hi Capa
are you a local to me? if not its probably just better to order online, check evike/a-airsoft etc
Yes I am
KnucklesGSM I live 30 min from hsp
What barrel is that? Is the comp fixed or screw off or what?
its a comp ready barrel, designed just for compensators
great job knuckles huge fan :-)
also... first comment
where can i buy this
Lmao pp package does that come wit pp touches lmao
lol
Yoooooo what’s your Instagram????????