You hit the nail on the head with the pros and cons. I have the same saw and would buy it again. Best saw out there in my opinion that is mobile and a space saver. I enjoyed mullet man as well. 👍🏼
I bought the same saw for the same reason. I got the Dewalt Miter saw stand with wheels (DWX726) for my miter saw. With them both easy and mobile I can work outside on nice days. I put my bench top on two saw horses. Shos set up and tear down about 5 minutes tops. My car is inside every night Great video. Thanks
It sounds like we have a similar workshop setup. I rarely feel like I NEED a bigger shop even though it can be cramped at times. I think it's fun to try to find creative solutions to the lack of space.
@@HowIDoThingsDIYYep seems that way in terms of shops. You are in the repairing children’s toy regularly stage, I have moved on to to fixing friend’s stuff since my children are in their 20s. I really don’t feel limited by space more freed because since I have to put everything away each time I leave the shop there is less clutter… except the ever growing cut offs I can use later pile. lol
I've watched a ton of these setup and retrospective videos on this saw, and maybe I missed it but I have yet to see anyone mention about the depth of the saw shifting due to that bolt being loose, so I really appreciate that tip. I would have never even though of it, and I'm sure it would have been slipping depth slowly without me noticing for a while.
I have the same saw and made a modified version of your outfeed table design. I routed miter clearance slots into the outfeed table so I can leave it up while using the cross cut sled.
@@HowIDoThingsDIY Been there. I just bought my first router and it took me an hour to figure stuff out, where it would have only taken 5 minutes had I read the instructions, but a man's gotta do what a man's gotta do.
I have an earlier version of that saw and I love it. It is my first saw. I have made over a dozen jigs for it and they really help me with accuracy and safety. The deciding factor that sent me to this saw is the R&P fence movement. Very adjustable and very accurate.
I have had that saw for @ 5 years and really like it. Bought it primarily because I needed to get both cars in the garage so folding it up was key. If I didn’t have that requirement I would have bought the Delta saw for about the same price.
I just bought this saw to upgrade from the dw745. I'm a contractor and this has all the power I need. However not a fan of the included stand. So I use the old one which was dewalts universal table saw stan it is more heavy duty in my opinion. Great video thanks for the review
Really? I've never used the old one, but I'm pretty happy with the one that came with the saw. But I'm sure, as a contractor, you're much harder on yours.
I've had this saw for about a year and learned some really useful adjustment info from your video. Thank you! When you mentioned the sidekick I thought Oh no. It wasn't bad though. I wouldn't want that in all your videos, but don't listen to the naysayers. You definitely looked like you had a good time with it and it's not like it was a huge distraction from your well edited video.
Haha, thanks. I plan to continue with various side kicks from time to time. I know people are saying they don't like "The Mullet Maker", but this video also seems to have a ;much higher than usual retention rate. :) Maybe it's like driving past a car crash an its horrible but you just can't look away.
Just got one of these. For me I’m coming from a 20 year old craftsmen job site saw. Safety features on the craftsmen are nonexistent. No riving knife and the blade guard failed years ago. Fence system was limited to 12 inch cuts and required a lot of fiddling to get it square. Mitre cuts really required a sled and it had a non-standard throat plate so 0 clearance inserts were basically impossible. The dewalt massively improves on all of that. Plus it’s still small enough to fit in my garage when both cars are parked.
Nice review, appreciated the quick pace! I’m up in Canada! We use this on a job site, interesting to see it can be used for much more complex cutting applications.
Been thinking about buy a new table saw. This has been the done review by pointing out the adjustment screw locations. Just wondering about the bed surface. It looks like plastic rather than steel.
By "bed" I am guessing you refer to the table top. It's cast aluminum. Not plastic. It's classified as a job site saw and it's not 100% flat. But if you use a table saw sled, it will be moot point.
I've been using rhe first gen for about 18 years now, great saw but the ripping capabilities are limited, I just upgraded to this model, I'm still getting use to. I rip a lot of 4x8s alobe with no problems. you only need a pair of adjustable saw horses and a sheet of plywood for your out feeeder and the rest it's easy.
It's cool to hear you stuck with the brand after that much use. So far, I'm still very happy. I like your tip to temporarily increase the table size. I'll give that a try!
Great review I’ve been looking this saw because of the same reasons limited space and I’ve seen a lot of videos saying the same things it’s a good saw thanks for sharing
Like you, my workspace is limited as I have to park a car in it. I downloaded the folding outfeed table and plan on it being my first DYI project using the table saw. Good video. Thanks from Sedona AZ - Beginner
Thank you so much for the comment and for helping support my channel. Much appreciated. Please let me know if you have any questions during your build. I'm here to help.
@@HowIDoThingsDIY Wrote this because I bought recently 7492 and seen tons of the other reviews and this one is lighting year ahead and its similar saw like urs 🙂
how wonderful you are Moving around with photography in tribute, which makes pedestrians know the smallest details. The view and moving the camera in every corner is a bit tiring, but it enhances the content
You can get cheap roller stands from harbor freight. They work pretty well as an out feed table. You can get three of them for about $60 total. One in front, one in back, and one to the side you can rip any size sheet by yourself.
I liked your video. I've watched quite a few and no one has shown the width capacity for cuts to the left of the blade. I have a particular cut that I regularly make requiring me to cut on the left of the blade, thanks for the great video
I bought and returned this saw three times, and it's because of one issue: I just can't get the fence square to the table. It's easy enough to adjust the fence so it's square to the miter slot, but if I put a square up against the fence, the upper portion of the fence is closer to the blade than the lower portion is. There is absolutely no way to adjust the fence for this issue, and it seems every model I buy has this problem. It was a huge PITA. I had to haul this massive, heavy box home, pull out all the materials, and start setting up the saw only to discover the fence is permanently messed up. This required me to repack everything and take the heavy box back to the store. What kills me is everyone states it's the best job site table saw out there.
That's really good insight. Honestly, I haven't checked for square in that direction, but I will. One work around would be to make a new fence that sits on top of the old one that offers small adjustment to fix this. This would also allow you to have a sacrificial fence and then extend the height. Thanks for your comment!
On the backside of the saw - under the table is 2 bolts that you can loosen up an "shift" motor housing a wee bit left or right , That will Square up your blade . On the Fence you can loosen those Allen head bolts an shift the fence left or right . My Blade was off by roughly .010 thousandths using a caliper. Adjusting the blade square & then adj fence & miter slots Took less than 10 minutes 👍
DeWalt claims it can cut a 13/16" dado but that seems like a lot of spinning metal for this saw. My personal max is 3/4" just to be on the safe side. Make sure you pick up the dado set amzn.to/3P8pACc and throat plate amzn.to/3T8OZNh
Thanks for the video. Good sir, in the same situation, shop is the garage also looks like in pulling the trigger and I have my table designed for it already
Hey great video! I like the mullet maker. Can you tell me the dimensions of the saw folded up? I have very limited space. I think I found some space underneath my stairs haha.
Im not positive, but I did read this on another sight. I would suggest spending some time in the manual. "According to the manual, the maximum dado width is 13/16″ and a maximum blade diameter of 8″. They also offer a dado throat plate."
I have the same saw. 32.5" is no long a limit for me. I can square up a 24"x48" plywood easily. I made a support that goes onto the screw where the fence latches onto. Also made a tapering jig that doubles as cross cut sled with a fence (I use 1" x 2" 80/20) dialed in to .0013" error per 10 inches cut length. Clamp the 2ft x 4ft onto the jig and let it rip. Just make the support same height as the sled and you are good to go. I had 2 more problem with this saw you didn't cover. 1) the screw holding the blade came loose twice on me. 2) the lever that locks the bevel came loose once while I was using a zero-clearance sled. Yeah, kiss that zero clearance good bye. Totally ruin the sled. 3) the height still creeps a little even tho I tighten (without over tighten) the screw. I had to triple check those 3 things every time especially when I do non-thru cut. Overall, I was very impressed with the cut quality despite the short coming. Just have to pay little extra attention before using the saw.
@markoasdadriver6285 Wait, are you talking about the dado set or the combination and ripping blades? The regular blades are 10" and the dado set is 8". I'm sorry if I confused you.
Hello. Can i run a 10 inch table saw in an outlet in my garage?? I’m not a carpenter but i bought a table saw just to do some minor works at my home built a shoe cabinet for my son. So i was wondering if i can using the garage outlet to run a dewalt 10 inch table saw??? It’s 15 Amp 120 volts saw don’t know if that info is helpful. Also does a table saw use so much electricity and expect an expansive monthly bill? Please! Thank you.
Yes, you can run it on a normal outlet but try not to run anything else big on that same circuit when using the saw. I used to do that but when my air compressor would kick on it would trip the breaker. I also had occasional issues when cutting long cuts in hardwood. Your electricity bill will go up a bit but it no more than it you were doing it all with a circular saw. Also, here is a video I made on adding a 20 amp circuit to your garage if your interested. I haven't tripped a breaker since. th-cam.com/video/myQMTi466p0/w-d-xo.html
For the money this is a great saw . On my saw while the table isn't dead flat the couple of low spots roughly the size of your thumb nail are no more than the thickness of 2 sheets of notebook paper so I guess I lucked out 🤷♂️ . Once I got everything dialed in it cuts pretty dang accurate, plus with it being able to fold & stow is a awesome feature. While I may not use it everyday , when I do go to use it I'm only limited by my ability to do so . An yes that Miter gauge is J-U-N-K , the first few times I ended up putting several layers of painters tape along the edge of the miter gauge to take up that awful side to side Slop . I'm guessing they threw that thing in there to hold down the price of the saw .
Very informative video with the exception that it didn't address some of the complaints in other reviews (loose or wobbly arbor, table less than dead flat, fence not parallel to the blade, motor mount that loosens, etc.) Bottom line. This video maked me want to buy this saw but other videos or reviews are staring me off.
I have had mine for about 6 years. My only real gripe is that the top is not that flat. Others saws of the same style only cut 24" wide. The mitre saw is a POS indeed. The rack-n-pinion drive for the fence is great. Easy to make that small adjustments very easily.
Yes, I think it's a good saw for woodworking. It's not as good as a nice cabinet saw. But if you're short on space, like I am, It's a good choice. I have a link to the saw in the description, and here are plans for some jigs and a folding outfeed table. I highly recommend an outfeed table. howidothingsdiy.com/plans
i have an issue with this saw that the blade/riving knife shake for a brief moment on startup. Enough so that if i saw the saw with the blade up through a ZCI or crosscut sled that it causes tearout on the sides and has widened parts of my sled by 1/32 wider than the kerf. Anyone notice this? Once the saw is up to speed it cuts perfectly. The workaround of starting the saw and raising it while spinning seems cumbersome and not practical.
@@HowIDoThingsDIY its a great saw otherwise, its just made the kerfs on my ZCIs and crosscut sled a bit sloppy. I'm probably expecting too much from a jobsite saw
Thank you for the review. I sold my unisaw and would like to get something smaller that can still complete the work I want to do. Thank you for pointing out the depth adjustment issue. After tightening it are you able to make accurate dadoes without the depth changing? I use the dado stack a lot but I am aware there will be sacrifices after getting rid of the cabinet saw.
Thanks for the comment. Yes, tightening the screw fixed my depth of cut issue. If you end up buying the saw through Amazon, please use the link in my description. It doesn't cost you anything extra but it helps support my channel. Please let me know if you have any other questions.
Where did you purchase your new fence from? And yes I would like the videos better without the mullet guy just makes the videos more serious thanks for the video
Thanks for the comment. I made the fence. Here's the video, and you can find the Amazon link to the material in the comments. I'm sorry you didn't like the mullet maket. He told me he likes you... haha th-cam.com/video/Ga-kHFvRo6c/w-d-xo.html
You must be Midwest USA. That wig tells that. I’m disabled in GA. New shop. I need to turn wood table to hold tools to fold out to use. (Save Space). 12x16 Shop. Only have few tools so far. But combination is welding, woodwork, Smart electronics, landscaping . A side shed closed in to hold large landscape equipment (needs built). I have to run electricity. What state r u in?
Lol , must have good humor these days!. If you get vacation time, visit GA. Maybe for your help with my shop, I can take you fishing. (Lake Oconee, Clark Hill Reservoir). Excellent fishing. You can blog all 3. Lol
My brother bought out cabinet shop he worked for. 2 owners retired. He had commercial contracts for 1t yrs plus new home builders. He cut backto new homes, remodeled homes, custom offices for judges and attorneys. He is busy as ever thankGod. I helped friend remodel Hollifield’s 2 mansions. I needed extra cash. I worked full time at IBM USA, THEN PROMOTED TO ASIA PACIFIC UNTIL FORCED RETIRED MEDICAL REASONS. I RELAX IN SMALL CITY NEAR AUGUSTA (WHERE MASTERS SPRING GOLF TOURNEYS KICKOFF. “GREEN JACKET”.) IM TRYING TO GET BUSY AND TRY IMPROVE HEALTH.
@@HowIDoThingsDIY would be in the back of a Honda CR-V. I have a cubby space that’s a 31 inch by 30 inch you think that would be wide enough to store folded?
Cubby space is in the house near a freezer. We have a ramp in the back of the house that leads too it. I could send pictures if you have an email. Thanks for the response.
@@HowIDoThingsDIY thanks! How do you like it? I know I will want upgrade mine eventually and I was thinking the incra 1000se but this is much more affordable
I like it. Much improved over the one the saw came with. I like being able to adjust out the miter slop and the fence is nice. Especially with the adjustable stop.
I bought the same saw a year ago to replace an old Makita job site table saw. That saw worked reliably in my shop for many years, but the inability to use a dado stack, and the less than 11” rip capacity were both annoying shortcomings! The DeWalt was definitely a major step up, and it has greatly expanded my capabilities and accuracy! I don’t have the finances for a Sawstop or other high end saw nor the room for it, and I would rank the DeWalt as my #1 most important and satisfying machine! Would definitely buy the same saw if I had it to do over!
@@HowIDoThingsDIY , The best instructional videos place emphasis on quality of the video, and of the information. Music, or other distractions are just that. I love that we can go to find instruction on any subject we might have an interest in. Woodworking is a good platform. Make the channel yours, but no need for gimmicks. Talent is what sells here. Both in the content, and personality. Best wishes, my friend.
@@HowIDoThingsDIY , I hear you. If you're looking for something different, gave a portion of time where you can teach a specific skill. Take your time, explain carefully, and give pointers, and pitfalls to avoid. I've trained many guys in my trade, and until they master basic skill sets, they'll never improve. You might find that's your niche: teaching. Anyways, best of luck. I subscribed.
I just bought this saw…and I just found this channel. I subscribed…thinking this would be an informative, no BS resource. Now I see the Mullet Guy. This sort of silly shit adds nothing. It’s a good way to lose subscribers.
I'm sorry you don't like it. I'm trying to delivery quality information with some entertainment. I hope you stay but I'll understand if you go. Thanks for watching!
Did you guys like "The Mullet Maker"? Should I bring him back?
No
@@drtacos Hahahha
tell him to sweep up, but after you’re done making a video
get him to clean late night lol
Now thats a good idea!
Dump it. It takes away from the credibility of the review.
You hit the nail on the head with the pros and cons. I have the same saw and would buy it again. Best saw out there in my opinion that is mobile and a space saver. I enjoyed mullet man as well. 👍🏼
Thanks! I couldn't agree more.
I bought the same saw for the same reason.
I got the Dewalt Miter saw stand with wheels (DWX726) for my miter saw.
With them both easy and mobile I can work outside on nice days.
I put my bench top on two saw horses. Shos set up and tear down about 5 minutes tops.
My car is inside every night
Great video. Thanks
It sounds like we have a similar workshop setup. I rarely feel like I NEED a bigger shop even though it can be cramped at times. I think it's fun to try to find creative solutions to the lack of space.
@@HowIDoThingsDIYYep seems that way in terms of shops. You are in the repairing children’s toy regularly stage, I have moved on to to fixing friend’s stuff since my children are in their 20s. I really don’t feel limited by space more freed because since I have to put everything away each time I leave the shop there is less clutter… except the ever growing cut offs I can use later pile. lol
I've watched a ton of these setup and retrospective videos on this saw, and maybe I missed it but I have yet to see anyone mention about the depth of the saw shifting due to that bolt being loose, so I really appreciate that tip. I would have never even though of it, and I'm sure it would have been slipping depth slowly without me noticing for a while.
Oh ya. That drove me crazy. It's much better now. Thanks for the comment!
I have the same saw and made a modified version of your outfeed table design. I routed miter clearance slots into the outfeed table so I can leave it up while using the cross cut sled.
Outstanding! I've been thinking about that as well. Thanks for the comment.
So when you say "I figured out", what you really mean is that you finally took the time to read the instructions.
Haha. I guess so, ya! Thanks for the comment.
@@HowIDoThingsDIY Been there. I just bought my first router and it took me an hour to figure stuff out, where it would have only taken 5 minutes had I read the instructions, but a man's gotta do what a man's gotta do.
@@YESITSWILL I mean... It's hard to say you're a "real" man if you can't figure it out without the instructions... Haha.
@@HowIDoThingsDIY that's right 💪💪💪
Hahahhahaha
Great job on this one! I've owned the same saw for years, and I love it. I even learned some new things from your video!
Thanks so much! I appreciate that. I'm glad I was able to show you something you didn't know.
Fun and informative. Thanks for putting this together.
I'm glad you found it helpful and enjoyable! Thanks for the comment.
I have an earlier version of that saw and I love it. It is my first saw. I have made over a dozen jigs for it and they really help me with accuracy and safety. The deciding factor that sent me to this saw is the R&P fence movement. Very adjustable and very accurate.
Well said. This one also takes a dado set. Did the older version.
@@HowIDoThingsDIY
@@HowIDoThingsDIY NO but I found a blade set that would do 1/4 and 3/8 dado and it works for now.
Perfect!
I have had that saw for @ 5 years and really like it. Bought it primarily because I needed to get both cars in the garage so folding it up was key. If I didn’t have that requirement I would have bought the Delta saw for about the same price.
I totally agree. Folding it up was a critical feature at this point in my life. Maybe some day I'll have a dedicated shop.
I just bought this saw to upgrade from the dw745. I'm a contractor and this has all the power I need. However not a fan of the included stand. So I use the old one which was dewalts universal table saw stan it is more heavy duty in my opinion. Great video thanks for the review
Really? I've never used the old one, but I'm pretty happy with the one that came with the saw. But I'm sure, as a contractor, you're much harder on yours.
Really funny dude. And great overview of the saw. Clear and concise.
Thanks man. The Mullet Maker isn't for everyone, but I like him.
I personally will have to meet this Mullet Man, what a character.....
Haha. Ya, he's has a "dynamic" personality.
I've had this saw for about a year and learned some really useful adjustment info from your video. Thank you! When you mentioned the sidekick I thought Oh no. It wasn't bad though. I wouldn't want that in all your videos, but don't listen to the naysayers. You definitely looked like you had a good time with it and it's not like it was a huge distraction from your well edited video.
Haha, thanks. I plan to continue with various side kicks from time to time. I know people are saying they don't like "The Mullet Maker", but this video also seems to have a ;much higher than usual retention rate. :) Maybe it's like driving past a car crash an its horrible but you just can't look away.
Just got one of these. For me I’m coming from a 20 year old craftsmen job site saw.
Safety features on the craftsmen are nonexistent. No riving knife and the blade guard failed years ago. Fence system was limited to 12 inch cuts and required a lot of fiddling to get it square. Mitre cuts really required a sled and it had a non-standard throat plate so 0 clearance inserts were basically impossible.
The dewalt massively improves on all of that. Plus it’s still small enough to fit in my garage when both cars are parked.
I completely agree. I'm a big fan of mine. Thanks for the comment.
Nice review, appreciated the quick pace! I’m up in Canada! We use this on a job site, interesting to see it can be used for much more complex cutting applications.
Oh ya. It's a pretty solid saw for lots of stuff. It's pretty much the only way I do woodworking in my tiny shop. I appreciate the comment!
Great channel. New sub!
Just purchased the DWE7491RS and also splurged and got your out-feed table download.
Thank you 👍
No, thank you! I have all sorts of good plans for this saw. I have more content coming around making it even better.
Nice review, outfeed issues are real
Thanks!
Been thinking about buy a new table saw. This has been the done review by pointing out the adjustment screw locations. Just wondering about the bed surface. It looks like plastic rather than steel.
Honestly, I'm not sure what metal it is but it's definitely metal. It just has a paint or power coat on it.
@@HowIDoThingsDIY ok great thx. Also, the line should've read "this has been the best-done review..."
Hahah. Thank you. I appreciate that!
By "bed" I am guessing you refer to the table top. It's cast aluminum. Not plastic. It's classified as a job site saw and it's not 100% flat. But if you use a table saw sled, it will be moot point.
I've been using rhe first gen for about 18 years now, great saw but the ripping capabilities are limited, I just upgraded to this model, I'm still getting use to. I rip a lot of 4x8s alobe with no problems. you only need a pair of adjustable saw horses and a sheet of plywood for your out feeeder and the rest it's easy.
It's cool to hear you stuck with the brand after that much use. So far, I'm still very happy. I like your tip to temporarily increase the table size. I'll give that a try!
Great review I’ve been looking this saw because of the same reasons limited space and I’ve seen a lot of videos saying the same things it’s a good saw thanks for sharing
Thanks! You might also enjoy this video. It's about must-have table saw accessories. th-cam.com/video/QtKED2vOD-o/w-d-xo.html
Like you, my workspace is limited as I have to park a car in it. I downloaded the folding outfeed table and plan on it being my first DYI project using the table saw. Good video. Thanks from Sedona AZ - Beginner
Thank you so much for the comment and for helping support my channel. Much appreciated. Please let me know if you have any questions during your build. I'm here to help.
Great review! The Mullet guy can go however.
Unfortunately, he keeps coming over and drinking all my beer.
I got the same saw and I make some money with it
Fantastic! Thanks for the comment!
Awesome job! Very informative! Also, great job, Mr. Mullet maker
Thanks! That Mullet Maker is a good dude.
Considering other table saw in this category, just be happy with this one lol
I am happy with it! Thanks for the comment.
@@HowIDoThingsDIY Wrote this because I bought recently 7492 and seen tons of the other reviews and this one is lighting year ahead and its similar saw like urs 🙂
how wonderful you are Moving around with photography in tribute, which makes pedestrians know the smallest details. The view and moving the camera in every corner is a bit tiring, but it enhances the content
Thank you!
I have the saw and built a table for it, excellent saw 👍
I agree. It's hard to do better when you want something. You can fold away when you're not using it.
I loved your presentation!!! Honestly, thank you.
You are so welcome!
I had one of these for a while and it was a good little saw. The one thing I really didn't like was how noisy it was.
It's my only table saw so I don't have much to compare noise level to. Thanks for the comment!
You can get cheap roller stands from harbor freight. They work pretty well as an out feed table. You can get three of them for about $60 total. One in front, one in back, and one to the side you can rip any size sheet by yourself.
Thanks Bob Villa!
I liked your video. I've watched quite a few and no one has shown the width capacity for cuts to the left of the blade. I have a particular cut that I regularly make requiring me to cut on the left of the blade, thanks for the great video
I really appreciate your comment. Makes me want to make another video asap. Haha.
I have the saw it does a good job for me. I like the idea of the plastic addition to the fence. How do you fasten it to the fence?
I use fence clamps. Here is the full video. I have Amazon links to everything in the video description. Thanks for the comment!
I would have reservations on doing to much dado work or 2x cutting with this saw. Had a dw745 that didn't last 2 siding jobs and the motor gave out.
Ok. I dont do dados too much. Thanks for the comment!
I bought and returned this saw three times, and it's because of one issue: I just can't get the fence square to the table. It's easy enough to adjust the fence so it's square to the miter slot, but if I put a square up against the fence, the upper portion of the fence is closer to the blade than the lower portion is. There is absolutely no way to adjust the fence for this issue, and it seems every model I buy has this problem. It was a huge PITA. I had to haul this massive, heavy box home, pull out all the materials, and start setting up the saw only to discover the fence is permanently messed up. This required me to repack everything and take the heavy box back to the store. What kills me is everyone states it's the best job site table saw out there.
That's really good insight. Honestly, I haven't checked for square in that direction, but I will. One work around would be to make a new fence that sits on top of the old one that offers small adjustment to fix this. This would also allow you to have a sacrificial fence and then extend the height. Thanks for your comment!
On the backside of the saw - under the table is 2 bolts that you can loosen up an "shift" motor housing a wee bit left or right , That will Square up your blade .
On the Fence you can loosen those Allen head bolts an shift the fence left or right . My Blade was off by roughly .010 thousandths using a caliper. Adjusting the blade square & then adj fence & miter slots Took less than 10 minutes 👍
@@paulrooster2108 Right on! Thanks for the add.
Just bought this saw. How wide of a dato can it cut? I haven't used my saw yet. Thanks for the video.
DeWalt claims it can cut a 13/16" dado but that seems like a lot of spinning metal for this saw. My personal max is 3/4" just to be on the safe side. Make sure you pick up the dado set amzn.to/3P8pACc and throat plate amzn.to/3T8OZNh
Thanks for your review!,
You're welcome!
Thanks for the video. Good sir, in the same situation, shop is the garage also looks like in pulling the trigger and I have my table designed for it already
Ya, having limited space definitely makes it challenging. The outfeed table has been super helpful.
This is a very informative video
Thank you. I'm glad it was helpful!
Hey great video! I like the mullet maker. Can you tell me the dimensions of the saw folded up? I have very limited space. I think I found some space underneath my stairs haha.
Folded up and in position to roll around: about 27" wide, about 27" deep and 48" tall with the handle, 40" tall without the handle.
Hi Mark i have 7490. Will it except dado Blade
Im not positive, but I did read this on another sight. I would suggest spending some time in the manual. "According to the manual, the maximum dado width is 13/16″ and a maximum blade diameter of 8″. They also offer a dado throat plate."
I have the same saw. 32.5" is no long a limit for me. I can square up a 24"x48" plywood easily. I made a support that goes onto the screw where the fence latches onto. Also made a tapering jig that doubles as cross cut sled with a fence (I use 1" x 2" 80/20) dialed in to .0013" error per 10 inches cut length. Clamp the 2ft x 4ft onto the jig and let it rip. Just make the support same height as the sled and you are good to go.
I had 2 more problem with this saw you didn't cover.
1) the screw holding the blade came loose twice on me.
2) the lever that locks the bevel came loose once while I was using a zero-clearance sled. Yeah, kiss that zero clearance good bye. Totally ruin the sled.
3) the height still creeps a little even tho I tighten (without over tighten) the screw.
I had to triple check those 3 things every time especially when I do non-thru cut. Overall, I was very impressed with the cut quality despite the short coming. Just have to pay little extra attention before using the saw.
Wow, thanks for the adds. Great information.
I know this guy named JR that sounds exactly like the mullet head.
Hahahhaha. Thats awesome.
Hi, tried to order you table extension plan with my CC, but said try again later. Are you still selling the plans?
I'm sorry your having issues! You could try to order on my Etsy store. Here's the link. howidothingsdiy.etsy.com/listing/1095250072
What size deablo do you use. Every 10” I’ve seen is 254 wouldn’t the hit the riding knife holder or do you use an 8”
You are correct! The dado set you use for this saw is an 8" set. Here's a link: amzn.to/3I6EAwB
@@HowIDoThingsDIY cheers. Was confused as the deablo on the table when you was explaining the blades you use is 10”
@markoasdadriver6285 Wait, are you talking about the dado set or the combination and ripping blades? The regular blades are 10" and the dado set is 8". I'm sorry if I confused you.
@@HowIDoThingsDIY ok. Got you. Cheers. Know what I’m getting now 👍🏻
Fantastic. Let me know if you have any other questions.
What do you use for an insert when the Dado set is being used? Do I have to use a sled?
I use the dewalt dado insert. But you could also use a sled or make a zero clearance insert. I show how to make one on another video on my channel.
Hello. Can i run a 10 inch table saw in an outlet in my garage?? I’m not a carpenter but i bought a table saw just to do some minor works at my home built a shoe cabinet for my son. So i was wondering if i can using the garage outlet to run a dewalt 10 inch table saw??? It’s 15 Amp 120 volts saw don’t know if that info is helpful. Also does a table saw use so much electricity and expect an expansive monthly bill? Please! Thank you.
Yes, you can run it on a normal outlet but try not to run anything else big on that same circuit when using the saw. I used to do that but when my air compressor would kick on it would trip the breaker. I also had occasional issues when cutting long cuts in hardwood. Your electricity bill will go up a bit but it no more than it you were doing it all with a circular saw. Also, here is a video I made on adding a 20 amp circuit to your garage if your interested. I haven't tripped a breaker since. th-cam.com/video/myQMTi466p0/w-d-xo.html
@@HowIDoThingsDIY Wow! Thank you so much. It was very helpful cleared out my doubts. Thanks again!
Does the fence lock down
Yes, the factory fence locks down.
For the money this is a great saw . On my saw while the table isn't dead flat the couple of low spots roughly the size of your thumb nail are no more than the thickness of 2 sheets of notebook paper so I guess I lucked out 🤷♂️ . Once I got everything dialed in it cuts pretty dang accurate, plus with it being able to fold & stow is a awesome feature. While I may not use it everyday , when I do go to use it I'm only limited by my ability to do so . An yes that Miter gauge is J-U-N-K , the first few times I ended up putting several layers of painters tape along the edge of the miter gauge to take up that awful side to side Slop . I'm guessing they threw that thing in there to hold down the price of the saw .
Haha. Thanks for the comments. I can't agree with you more.
Very informative video with the exception that it didn't address some of the complaints in other reviews (loose or wobbly arbor, table less than dead flat, fence not parallel to the blade, motor mount that loosens, etc.) Bottom line. This video maked me want to buy this saw but other videos or reviews are staring me off.
Very good points. Maybe I should do a follow-up video covering all the know issues and talk about which ones can be fixed and how.
I have had mine for about 6 years. My only real gripe is that the top is not that flat. Others saws of the same style only cut 24" wide. The mitre saw is a POS indeed. The rack-n-pinion drive for the fence is great. Easy to make that small adjustments very easily.
I agree completely. It's a good saw for jobsite.
@@HowIDoThingsDIY I live in a condo, so it is all that I can have here. I use to have a TradeMaster true 1.5HP 18A table saw, those were the days.
@andymok7945 Right on. I just have a third stall, and I park my car in it when I'm done.
Great review my man!
Much appreciated!
@@HowIDoThingsDIY I just picked one today. Going to do all the maintenance and jigs you have for it now. Thanks for the content 👍
Awesome! I have the plans if you want them over on my website. Www.howidothingsdiy.com
My dewalt looked extremely scratched up after a month use. How did u prevent urs from getting all scratched up?? lol
I used paste wax on it every, not and then. That may be the difference. It probably also depends on what type of wood you're cutting
Hello from Greece
Hello from Wisconsin!
So, with the right tune up and blades and other accessories, this saw would be good for fine woodworking?
Yes, I think it's a good saw for woodworking. It's not as good as a nice cabinet saw. But if you're short on space, like I am, It's a good choice. I have a link to the saw in the description, and here are plans for some jigs and a folding outfeed table. I highly recommend an outfeed table. howidothingsdiy.com/plans
@@HowIDoThingsDIY thanks. Very helpful. Can't do a cabinet saw til next year.
@@jimcohoon9434 I get that!
Good review. Thanks.
Thank you!
I skipped to the end so you don’t have to.
Yes if you are limited on space and need portable saw
No if you can accommodate a bigger saw
Ok.
Please put a link to the site where you purchased the miter gauge
It was in the comments, but here it is! Thanks for watching. amzn.to/3RXs5HU
Great info thanks
Glad it helped!
i have an issue with this saw that the blade/riving knife shake for a brief moment on startup. Enough so that if i saw the saw with the blade up through a ZCI or crosscut sled that it causes tearout on the sides and has widened parts of my sled by 1/32 wider than the kerf. Anyone notice this? Once the saw is up to speed it cuts perfectly. The workaround of starting the saw and raising it while spinning seems cumbersome and not practical.
Hmmm... I haven't noticed it, but then I wasn't looking for it either.
@@HowIDoThingsDIY its a great saw otherwise, its just made the kerfs on my ZCIs and crosscut sled a bit sloppy. I'm probably expecting too much from a jobsite saw
Probably! Haha. My ZCI has widened a bit with different blades anyway.
Thank you for the review. I sold my unisaw and would like to get something smaller that can still complete the work I want to do. Thank you for pointing out the depth adjustment issue. After tightening it are you able to make accurate dadoes without the depth changing? I use the dado stack a lot but I am aware there will be sacrifices after getting rid of the cabinet saw.
Thanks for the comment. Yes, tightening the screw fixed my depth of cut issue. If you end up buying the saw through Amazon, please use the link in my description. It doesn't cost you anything extra but it helps support my channel. Please let me know if you have any other questions.
Very good, much info but skip the wig-parts
Thanks.
Which mitre gauge did you purchase?
The Fulton amzn.to/3Lqb3Aj
How much was the saw?
I think I paid $550 about 2 years ago.
Where did you purchase your new fence from? And yes I would like the videos better without the mullet guy just makes the videos more serious thanks for the video
Thanks for the comment. I made the fence. Here's the video, and you can find the Amazon link to the material in the comments. I'm sorry you didn't like the mullet maket. He told me he likes you... haha
th-cam.com/video/Ga-kHFvRo6c/w-d-xo.html
DW7491 is out of stock everywhere.
It's the DWE7491RS. Amazon says they have it in stock right now. Hears a link. amzn.to/436dy2b
You must be Midwest USA. That wig tells that.
I’m disabled in GA. New shop. I need to turn wood table to hold tools to fold out to use. (Save Space). 12x16 Shop. Only have few tools so far. But combination is welding, woodwork, Smart electronics, landscaping . A side shed closed in to hold large landscape equipment (needs built).
I have to run electricity. What state r u in?
I'm in Wisconsin. Thanks for the comment!
Lol , must have good humor these days!.
If you get vacation time, visit GA. Maybe for your help with my shop, I can take you fishing. (Lake Oconee, Clark Hill Reservoir). Excellent fishing. You can blog all 3. Lol
I actually lived in Auburn, AL for about 5 years. I'm also headed down to Atlanta in this winter for Workbench Convention.
You got the convention website info?
My brother bought out cabinet shop he worked for. 2 owners retired. He had commercial contracts for 1t yrs plus new home builders. He cut backto new homes, remodeled homes, custom offices for judges and attorneys.
He is busy as ever thankGod.
I helped friend remodel Hollifield’s 2 mansions. I needed extra cash. I worked full time at IBM USA, THEN PROMOTED TO ASIA PACIFIC UNTIL FORCED RETIRED MEDICAL REASONS.
I RELAX IN SMALL CITY NEAR AUGUSTA (WHERE MASTERS SPRING GOLF TOURNEYS KICKOFF. “GREEN JACKET”.)
IM TRYING TO GET BUSY AND TRY IMPROVE HEALTH.
I really fucked up buying a table saw that can't take dado blades.
Ya, that is a really nice feature to have for sure.
Ditch the mullet man
I can't. His wife kicked him out and now he sleeps in my guest room.
Very useful review with great content and pertinent info! Loose you second identity, takes away from your knowledgeable demeanor.
Thanks. Second identity? That wasn't me, that was the Mullet Maker. Haha
None of your links are working for the plans.
Thanks for letting me know!! I'll work on fixing that now! It the mean time, try this link to take you to all my plans. howidothingsdiy.com/plans
Do you think this could be carried back and forth to a storage unit by myself?
It's about 100 lbs. It rolls very easily. Do you need to load it into a van or truck?
@@HowIDoThingsDIY would be in the back of a Honda CR-V. I have a cubby space that’s a 31 inch by 30 inch you think that would be wide enough to store folded?
Cubby space is in the house near a freezer. We have a ramp in the back of the house that leads too it. I could send pictures if you have an email. Thanks for the response.
@@imjusmoody180 Well, it rolls very easily on flat ground but is still heavy. My email is howidothingsdiy@gmail.com
The saw folded up is 48" x 28" x 28". I just measured. This is with the handle. It could be 40" x 24" x 28" without the handle.
Sorry man. The Elvis thing makes impossible to watch the video
Thanks for the opinion and the comment!
What’s that miter gauge?
I forgot to add that to the description. Here it is. amzn.to/38WN4bo
@@HowIDoThingsDIY thanks! How do you like it? I know I will want upgrade mine eventually and I was thinking the incra 1000se but this is much more affordable
I like it. Much improved over the one the saw came with. I like being able to adjust out the miter slop and the fence is nice. Especially with the adjustable stop.
I bought the same saw a year ago to replace an old Makita job site table saw. That saw worked reliably in my shop for many years, but the inability to use a dado stack, and the less than 11” rip capacity were both annoying shortcomings! The DeWalt was definitely a major step up, and it has greatly expanded my capabilities and accuracy! I don’t have the finances for a Sawstop or other high end saw nor the room for it, and I would rank the DeWalt as my #1 most important and satisfying machine! Would definitely buy the same saw if I had it to do over!
The DeWalt DWE7491RS that I have can use a dado set. See my box joint jig video.
Dump the attempt at comedy.
I'll watch to learn, but not to see failed attempts at comedy.
Not trying to be nasty, just honest.
You can speak as freely as you like. You won't be hurting my feelings. Thanks for the comment and the feedback!
@@HowIDoThingsDIY , The best instructional videos place emphasis on quality of the video, and of the information.
Music, or other distractions are just that.
I love that we can go to find instruction on any subject we might have an interest in.
Woodworking is a good platform.
Make the channel yours, but no need for gimmicks.
Talent is what sells here. Both in the content, and personality.
Best wishes, my friend.
@davidgraham2673 I honestly do that stuff more for me. Sometimes I get burned out and just need to have some fun.
@@HowIDoThingsDIY , I hear you. If you're looking for something different, gave a portion of time where you can teach a specific skill.
Take your time, explain carefully, and give pointers, and pitfalls to avoid.
I've trained many guys in my trade, and until they master basic skill sets, they'll never improve.
You might find that's your niche: teaching.
Anyways, best of luck.
I subscribed.
Best to decide whether you want a DIY channel or a comedy channel. I would advise DIY cos it's not remotely funny.
I appreciate your opinion! Thanks for the comment!
And you've decided to act like an insecure ass for whatever reason
Then watch someone else. I don't mind the skits. Nothing wrong with a detailed yet light hearted video.. Karen 🙄
Who pissed on your cheerios?
Hahahahhaha. Probably the Mullet Maker. He's notorious for pissing in Cheerios. He's a rascal!
Mullet maker ...no!
Hahahaha.
I liked the video other than the stupid mullet thing. I will not subscribe because of that. To bad this was the first video of your I saw.
I understand. He's not for everyone. Be sure to check out a few other videos just to be safe. Thanks for watching and for the comment!
Lighten up Francis!
Hahahah. Maybe my next video should be all Mullet Maker.
I just bought this saw…and I just found this channel. I subscribed…thinking this would be an informative, no BS resource. Now I see the Mullet Guy.
This sort of silly shit adds nothing. It’s a good way to lose subscribers.
I'm sorry you don't like it. I'm trying to delivery quality information with some entertainment. I hope you stay but I'll understand if you go. Thanks for watching!
What’s with the useless sidekick? Your video would be better without it.
Just trying to have a little fun. Thanks for the feedback.
No
Ok.
Nort for me. The attempt at comedy was actually really stupid. But hey, that's just my opinion.
I still like the comedy. I think it was more for me than the viewers. Just me having fun, I guess
I dont buy anything from Dewalt
I get that. Everyone has brands they like and brands they don't like. I value your opinion. Thanks for the comment.
so cringe
Haha
Lol, "i dont like that this 'dewalt' saw isnt a 'sawstop' saw"
🤦🏻♂️
Hahaha
Dumb....
SUPER dumb. I'm with you. This guy's a weirdo... Thanks for the comment!