It worked!!! I'm so releaved. I was worried I have to buy new keyboard. Just one thing: this guy have power cable attached, so I tried the same way but it didn't work for me then. But tried again without power and then it worked :D So happy guys
Thanks for watching Try this Shutdown the x2 Disconnect the keyboard from the x2 Press the ON/OFF button for 30 seconds (at least). Release the ON/OFF button. Attach the keyboard. Power on the x2. Check your Keyboard works
Shutdown the x2 (off, not suspended/sleeping) Disconnect the keyboard from the x2 Press the ON/OFF button for 30 seconds (at least). Release the ON/OFF button. Attach the keyboard. Power on the x2. Keyboard works!
Remove the travel keyboard. Shut down the computer Press and hold the power button for 30 seconds. The time is important, make sure you keep the power button pressed for at least 30 continuos seconds. During this time, you may see the HP logo flash on the screen one time - ignore this and keep the button pressed. After at least 30 seconds let go of the power button and reattach the keyboard Power on the computer If it worked you should see something on the screen about firmware updating - this is a good sign The "system drain" is supposed to drain the motherboard of all power so that all the circuits reset and then when you power back up it has to reinitialize in some way. Hope this works for you.
I followed the same method as in the video. It was completely broken. Now the LED light doesn't even blink, and it doesn't work. I'll probably need to get a new keyboard. Good luck everyone.
@@khcomputers At first, when I connected the keyboard to the tablet, only the LED lights blinked throughout the keyboard and it didn't work. So I separated the keyboard and tried to connect it again several times after a while. Then, luckily, it worked normally once. While searching the Internet to solve the keyboard problem, I happened to see the video you uploaded and tried to do it exactly the same way. After that, when I connected the keyboard to the tablet, the LED lights blinking throughout the keyboard disappeared, but the keyboard still didn't work. So I tried the method in the video several more times, but the problem wasn't solved and the symptoms were the same. I don't know if I'm just unlucky, but I can't see a way to revive the keyboard. I appreciate your interest in my problem and your willingness to help me. Thank you.
Worked perfectly 🎉🎉🎉
It worked!!! I'm so releaved. I was worried I have to buy new keyboard. Just one thing: this guy have power cable attached, so I tried the same way but it didn't work for me then. But tried again without power and then it worked :D So happy guys
Thanks for watching and encouraging
Need support on my TH-cam channel
Hey, tried your method from the video, still does not work. What else can i do?
Thanks for watching
Try this
Shutdown the x2
Disconnect the keyboard from the x2
Press the ON/OFF button for 30 seconds (at least).
Release the ON/OFF button.
Attach the keyboard.
Power on the x2.
Check your Keyboard works
@@khcomputers still doesnt work
Thanks for you, it has been work truthly@@khcomputers
Yeeey, it has worked. Thank you!!!!
Thanks for watching
Support my TH-cam channel
Can u Plz do for Hp prox2 612 g2
I tried to do this with my hp prox2 612 g2, but this did not work
Plz help me out
Thanks for watching
WhatsApp plz
@@chhayasingh8822 have same problem did you get any help
Alright it works for me also thanks you idol..
More power to you
It worked.. thanks 🙏
It worked!! Amazing! thank you! :)
Welcome
My keyboard light isn’t blinking just off and not working what can I do
Thanks for watching
I'll reply you soon
Wowwwww its nice JazakALLAH
Thanks for watching
😘🥰😍 IT works.... Thanks..,...❤❤❤
Thank you 🙏 it works!!!😅
After doing the 30second power holding , my hp x2 1012 can’t turn on again , is there any solution please
Thanks for watching
Please check video description
Please on your tablet
After complete windows booting connect your laptop keyboard
@@khcomputers pc can’t boot again , It has been fix today after taking it to software engineer
Shutdown the x2 (off, not suspended/sleeping)
Disconnect the keyboard from the x2
Press the ON/OFF button for 30 seconds (at least).
Release the ON/OFF button.
Attach the keyboard.
Power on the x2.
Keyboard works!
Will it loss any data
Thanks for watching
No any data loss in this procedure
Don't worry
It worked, thank you❤
Thanks for watching
Welcome
Support my channel
Thank you very much! it worked smoothly on my 2016 pavilion x2 :)
Thanks for your appreciation
it works well , tq
Nothing works at the end of the your video. You are pressing buttons but nothing happen.
Remove the travel keyboard.
Shut down the computer
Press and hold the power button for 30 seconds. The time is important, make sure you keep the power button pressed for at least 30 continuos seconds. During this time, you may see the HP logo flash on the screen one time - ignore this and keep the button pressed.
After at least 30 seconds let go of the power button and reattach the keyboard
Power on the computer
If it worked you should see something on the screen about firmware updating - this is a good sign
The "system drain" is supposed to drain the motherboard of all power so that all the circuits reset and then when you power back up it has to reinitialize in some way.
Hope this works for you.
I followed the same method as in the video.
It was completely broken. Now the LED light doesn't even blink, and it doesn't work.
I'll probably need to get a new keyboard. Good luck everyone.
Thanks for watching
How can I help you sir?
Please tell me about your issue
@@khcomputers
At first, when I connected the keyboard to the tablet, only the LED lights blinked throughout the keyboard and it didn't work.
So I separated the keyboard and tried to connect it again several times after a while.
Then, luckily, it worked normally once.
While searching the Internet to solve the keyboard problem, I happened to see the video you uploaded and tried to do it exactly the same way.
After that, when I connected the keyboard to the tablet, the LED lights blinking throughout the keyboard disappeared, but the keyboard still didn't work.
So I tried the method in the video several more times, but the problem wasn't solved and the symptoms were the same.
I don't know if I'm just unlucky, but I can't see a way to revive the keyboard.
I appreciate your interest in my problem and your willingness to help me.
Thank you.
Thank you
Welcome brother
Need channel support.... plz
My keyboard isnt working how do i do this then?
Thanks for watching
This method is not working?
@@khcomputersnot working . Let me know. What I do rn
@@aroojkhalid2783 Keyboard not working at all?
Also try this
Disconnect the keyboard and clean the connection points with a brush
Thanks jare
Mine did not work and I’m tired aje
Thanks for watching
Please don't worry about that
Send me message on my WhatsApp number
+923315624726
Same here. The blinking cant stop. Any other solutions without buying
Bg kalo leptop layar mati tapi keyboard hidup,malsalahnya apa?
Thanks for watching
Plz try same method
Why no speaking in this video? Hard to actually know what you’re doing
Thanks for watching
Whatsapp me I'll explain you
+923315624726
I need that laptop keyboard.
DM ME
It works for me.
i can't. my keyboard is still blinking
I did it two times, but it dont work
Thanks for watching
What's the issue now
How can i touch open in this device
Thanks for watching
Sorry for much late reply
Watch my tomorrow video on this topic
Will work on 1012 g1
Thanks for watching
I hope same method work on your model
Please try
Some Key's not working
Thanks for watching
If your laptop some keys not working it's mean your keyboard is faulty
Lol blowed air in mine and it worked😭
Not working. .
Thanks for watching
Same method try kia hai AP ne?
It didn't work
Thanks for watching
Please check same method in video description
Thank you
Thanks for watching
Welcome
@@khcomputers it worked and started again …what do you think I can do
@segunbodunde6065 your issue fixed or not?