FAQs page and Materials List are linked in the description! Video Outline + Timestamps below! .+:｡(ﾉ･ω･)ﾉﾞ 00:00:00 - 00:00:50 - Intro 00:00:50 - 00:09:12 - Method 1: Cooked Air Dry Clay 00:06:26 - 00:09:00 - How to check the clay's consistency? + How to fix undercooked and overcooked clay 00:09:24 - 00:12:52 - Method 2: No Cook Air Dry Clay 00:12:52 - 00:19:52 - Cooked vs. No Cook Air Dry Clay (Texture, Color Handling, Workable time, Sculpting Quality, Drying/Curing time Comparison) 00:19:52 - 00:20:38 - Additional Tips 00:20:38 - 00:21:00 - Quick Summary (Which is better?) 00:21:00 - 00:22:06 - Outro Thank you! 💚 Stay safe and stay crafty!
This might be one of the Best tutorial I've seen for diy air dry clay. You gave clear instructions and even told us how many days it takes for the clay to fully cure. I really liked how you compared both the cook and non-cook method with their pros and cons. You deserve more subs, there's no way you're this underrated!
Also, can you reduce the time or curing by using a hair dryer or some sort? I'm making a sculpture for my gf's project which is due on Tuesday. I'm planning on making the sculpture a bit big so i kinda worry it wouldn't cure on the day of submission.
if its possible for you to use aluminum foil or paper as a base and just use clay on the surface of your sculpture that could help reduce the time it takes to cure. putting my works in front of an electric fan helps it cure faster. using hair dryer sounds possible but not sure how well that works so i suggest you try that with a small amount of clay first.
You’ll have to learn to approximate how much shrinkage your pieces experience and make them appropriately larger in size in order to get the size you want after they’ve dried completely :)
Thank you for showing the difference between the two clays. I’ve been looking online to figure out why clay is cooked and what the difference is but couldn’t find anything until I found your video. I’ll give it a try today! Blessings ❤️
Haven't watched anything quite this awful and u say it is good., she had her closeup way too far in And the music I had to shut off. And I just had to stop half way in and refocus on it
Excellent video, both on video content and the way it was presented - not always a given in other similar videos of this genre I have watched. I have been looking for effective ways to make my own clay and this fits the bill. You have helped me on my project and gained a subscriber.
Bibili palang ako ng air dry clay ngayong 12:12 kasi wala pa akong budget for acrylic paint hahahahaha. Kapag nagtuloy-tuloy paggagawa ko itatry ko na to para makatipid ako. Thank you!! Ito ata ang pinakahelpful na napanood kong vid about ADC.
Thank you Eslyn! Glad you find this helpful 💖 Yes, making your own clay is a lot cheaper than buying especially if you happen to acquire cheaper materials! Happy claying! ✨
I've been wanting a air dry clay for a long time, I found one in the nearest stationary shop but it was a bit too expensive for me so I've wanted to make one myself and so this video is super useful
Hello, thank you very much for the awesome tutorial. I tried your recipe and even though it didn't pass the raindrop test, it dried really strong and could easily remedy the cracks and what not. My second batch became too soft and I made blocks of them at first, then made sculptures via carving. But I have a problem with molds during the rainy season here in the Philippines. I panicked and ended up throwing away my airdry sculptures and the few blocks I wanted to carve. How do I prevent molds from forming? Was there a way to remove the molds from the sculptures?
thank you! glad it worked well for you 😊 as for the molds, adding white vinegar or lemon juice should help prevent them. making sure your hands and anything that comes into contact with the clay is clean will prevent that from happening too. hope this helps! im from ph too and never really experienced my clays getting molds even though they've been on storage for a long time. and unfortunately, you can't really save clays that already has molds. even if you remove them, they will just grow back :/
You mentioned (raindrop test) I don’t think these are for outdoors. U would have to seal them as well, and even though you seal them they should not be left out doors.
Thank you so much Peter! Glad you find it helpful and you even watched it TWICE! 💕 Thank you thank you so much! I really appreciate the feedback. Stay safe! 😄
Hello! I made the no-cook clay recipe and it turned out quite well! But when I added colour to it lots of little cracks formed (something like dry land which is dehydrated). Can u please tell me a solution if u know about it?
The video is very clear and easy to understand and it's packed with knowledge so thank you for that. I'm wondering if you can mix both clays? To get slightly different texture than pure cooked clay but also not loose it perks.
Hey, the best video ive seen about this type of clay, i just tried the no Cook version but i dont understand why it hasnt the right consistancy, it cracks, doesnt makes the teardrop shape.. And it has this Sandy texture. I really measured all the ingredients i dont understand what i am doing wrong.
you may check the "how to check clay consistency part" i included fixes for such cases there. pls make use of the timestamps in the description or in the pinned comment. thank you :)
Hi, thanks so much for sharing. I follow your instructions and did make it work (cooked one). However my clay dries pretty fast, any suggestion to help it stay undried a bit longer?
some use a damp cloth to cover unused clay while they work. beware of lints though since they can get stuck in the clay. but if you're having problems with the clay you're actively sculpting with, i find it better to use slightly undercooked clay (be sure it's not super soft tho) as it will give you more time to work with (consider the shrinkage) or just use a bit of water to soften the clay every now and then.
Thank you for your excellent video! Enjoy it very much. Is there a difference between white glue and latex glue? Can i use normal whire glue instead of your type of glue?
hmm sorry im a bit confused bec i know what im using is also just a pva-based glue like other regular white glues out there. i am not familiar with latex glue
hardness depends on the size and thickness and they both harden pretty well as you can see in the last part where i compared them. i'd say the cooked one seems more durable in general
@@zainclayartsI have a serious question. When I made this clay once, I made the shape and let it dry, the side that was placed on the bottom (on the table) had small cracks. Is there any way to prevent this? To make it smooth everywhere?
@@katkaklarapaule5053 i have a video discussing how to properly cure adc. please check it out. it might help although cracking can be caused by other factors too.
Thank you for this video!! What do I do if the clay is sticky after it set? I've made on the stove and in the microwave and both was so sticky I couldn't get it out of the bag.
That means it's either really undercooked, or the ratio of starch:glue is incorrect. Just kneed more starch into it, or cook it a little more and you should be all set
this is such a great video! i do have a question though- will i be able to paint over already dried clay with acrylic paint and how well will the paint stay on?
I had a question regarding water you said we can use water to smooth the surface of the clay but i saw another video in which she uses same method and she said not to use water because it is biodegradable clay and it can get molds on it so should I use water or not
molds are tricky and no one really knows what causes it since several factors come into play like humidity, weather conditions, how it's stored and more. it rlly varies since we all live differently and in diff areas. personally, i never experienced my clay getting molds and i use water a lot while sculpting. the vinegar i use for my diy clay helps prevent it too. most ppl suggests using distilled but i just use tap water with no problems.
What a brilliant and lovely tutorial, thank you! I'm thinking about making a square plant pot, do these clays dry flat when rolled thin (maybe ½-1cm), or does it bow/curl?
thank you Rachel! glad you appreciate it 💖 i don't really recommend using air dry clay for plant pots or anything with moisture since it's possible that the clay might soften even if it's sealed. however, you can use it as an outer layer or for decoration for like a plastic pot for example. to answer your question though, yes it can dry flat but it depends on the way you let it cure. make sure to flip it several times to let all areas get exposed to air while it's drying.
in that case, be sure to get rid of air bubbles and be on the lookout for some cracking due to shrinkage. good luck on your project! hope it'll turn out great 😊
Hi, just a quick question. Thank you for the brilliant tutorial, but, I have been making a polymer air dry "picture" which will be attached to slate. I did not add colour as I made it, as I wanted to be able to paint shades, making it "pop" out.... is this ok to do? I have a varnish made for polymer to complete it. Should I continue, or start again with mixing the colours to clay before shaping it? Thanks
yes that's totally fine! for the varnish though, i think it's best to search if your varnish is compatible with the paint you're using coz sometimes varnishes can dissolve the paint and smudge it all over :)
thick pieces made with this clay are pretty durable. if you can add some kind of base or support inside, that will make your pieces much more durable. and yes, you can use them with silicone molds. apply oil on the molds so it wont stick
Sorry, I'm quite not sure I get what you mean.. However if you mean that you want to use this kind of clay together with paper mache, I think white glue would work just fine since white glue is also the binding agent for this recipe. Not sure with hot glue as I haven't tried it myself. :)
Hi. I came across another how to video accidentally, so I watched and tried it for 1st time tonight. It did not come out right at all. Ingredients were not for cornstarch but chalk powder and no vinegar. It was so soft, wouldn't come out of my mould!! Can I save it or through away and start over is only option?? Spent so much $ on chalk stuff already.. it's just flopping downwards on the table. What am I doing wrong miss?
Thank you for putting the full list of measurements for making both the white clays, onto the internet via TH-cam. This video has helped me a whole lot. I really look forward to creating some wonderful things with my grandchildren using the clay. I have a few questions for you:- 1) Do you suggest only creating small projects with the air dry clay..or can you do larger projects, such as vases, in air dry clay? 2) Do you advise on adding the poster paint to the air dry clay only when I plan to use the clay immediately? 3) Is it safe to seal the finished objects I make out of both types of clay by using a glaze only, or should I seal the object first with a spray on sealant, and then glaze it; if I wanted it to hold water for example? Thank you in advance for answering these questions. You are very kind!
Thank you so much Carly for a wonderful feedback! I'm glad you find it helpful 😊 To answer your questions, 1. I personally use it for small projects but I believe you can use it to make larger ones! It holds pretty well especially if the piece is solid. Might take awhile to completely cure it though so might be better to work on it in stages. 2. Yes, definitely. unless you can secure it in a completely airtight container which may allow you to store it for a long time. It will harden quite fast after it's mixed with any paint. 3. I haven't used this clay for any purpose involving water but I've read from other artists that air dry clay in general, no matter the type, is really not advisable to be used with anything that involves water like a pot or a vase even though it's already sealed with glaze or coated with varnish. The clay may turn soft again after awhile.
@@zainclayarts Thank you so much Zain. You are very kind to get back to me so quickly. Do you have any large projects coming up? A thought of mine was to make a nativity set and/farm yard set for my grandaughter. We could play together if it works. I shall be experimenting with different things to make the farm stables or the stable where Jesus was born for her. I thought she might like them, one or the other for Christmas. Shes only 4 years old and I know she would love to make the baby Jesus or the farmer and his wife for the farm yard. She is into arts and crafts which is brilliant because so am I!😁😀😄
@@carlycharlesworth1497 So far, I'm just planning to finish all my works in progress which are mostly character figures like the Sailor Moon I did :) I also decided to skip making any Christmas content since I currently don't really have a lot of time to make something and go through the entire process including editing. 😓 That idea is really cute!! You can try to incorporate other materials along with the clay to make it more realistic if you like. I wish I have someone to make things with haha I hope your granddaughter will enjoy claying too. And if it's alright, I'd love to see your works when you're done! I'd love to share it to others by featuring it in one of my videos as well 😁💕
@@zainclayarts oh how kind of you. I dont know if I would have the confidence to show anything I made but feel free to use the idea for yourself sometime. It would make a great video if you just built the stable in one video and some of the characters perhaps over two or three videos. I would absolutely watch that for sure. Maybe out it to the vote one year. I debated creating the stable out of a cardboard shoe box and coloured paper and some acrylics. I was planning to use strips of fabric to make the characters clothes and make a star out of cardboard, tinsel and a battery run candle. However, I have yet to successfully make the clay yet hahaha. Big dreams but I really want to try. It will be fun just to give it a go. I think i just need the cornflour and that's it. I will have to get my husband to pick me up some. I'm disabled and house bound at present you see. I'm sorry, i'm chattering on. Forgive me. It's been really lovely speaking with you tho. Thank you for your very kind offer. You seem like such a very kind person. Are you on messenger at all, perhaps we could chat on there? Or am I asking impertenant question of you? It's ok to tell me no..I will totally understand. God bless you.
@@carlycharlesworth1497 That's completely alright! I understand. There was also a time that I wasn't totally confident in sharing my works online but I thought, it wouldn't really hurt to try :) Now, I'm just glad that some people appreciate what i make and do. And yes, you're right! I'll consider making it for next year 😊 It might take awhile to finish but I hope you'll be able to finish it while enjoying the process! And no worries!! I do have a facebook page. facebook.com/zain.clayarts You may message me there if you'd like and we can talk about anything :) Though I might not be able to always reply on time but I do try whenever I'm free. I'm just on TH-cam now since I use it to play music haha
Hey Miss Zainy! 😉 Thank you so much for this video. It's very thorough with a lot of good information. You are naturally skilled at teaching. I had absolutely no problem understanding you. You speak very well, clearly, with good expression/modulation, and at a good pace. Your English is great. Your sense of humor is enjoyable.
Aww thank you so much Janet for such a detailed feedback 💖💖 I had to revise it a couple of times to make it concise and informative so your feedback makes me feel glad that it is understandable enough 💕
that depends on how dry your overcooked clay is. if you're unsure, there's really no harm in mixing a lot of undercooked clay with it. your clay will just be softer and you can just air dry it a little to get the right consistency.
Hello, I watched your video and it seems your video has the most when it comes to troubleshooting. I tried this out and made a couple of batches of different colors. Some of them would dry with little dips and made the shape all wonky. Do you maybe know the reason why that is? Did I not knead it enough for even distribution of starch? Or maybe my starch proportion was off? Thanks for the video
Thank you! Yes, @Farheen Yaseen is right. This type of clay is translucent when it dries. You may use acrylic paint or poster paint to add color to it. Just mix it directly with the clay after it's set.
You can just leave it wherever as long as it's exposed to air and that will cure it/harden it! i have another video on how to properly cure adc. you might want to check that out :) thanks for watching!
glad you find it helpful! 💚 i use cooked clay for making my figures so that's what i recommend. but do consider the drying time of the clay when working with small pieces
Tysm! I coudnt find the comparison anywhere, and I really needed it, also I like the way you made the video, it was very informative and I liked the graphics very much. I just want to ask one question tho, im making, pendants with my bff and I wanted to ask which is thr best for making them, cooked or non- cooked clay? Thankyou!
Hi Navya! I'm not quite sure if you've watched the summary part but I already mentioned there that cooked clay is "generally" better. There's also a comparison part between the two which shows and explains the differences and why cooked clay is better. Please watch those parts for more info. Timestamps are available in the description and pinned comment. Thank you! :)
Thank you for this amazing video!❤ I tried this today and to be clear, the tear drop shape is to be formed soon after kneading or after placing a few hours...?
Hi, Loved the tutorial. Had no idea what the differences where between cooked and non-cooked. You explained things very well. I do have a question, does either one shrink considerably after dried?
shrinkage depends on how much moisture is left in the clay after you sculpted it so i dont think any of them shrinks more than the other. generally, adc shrinks about 10-20%.
Thank you so much! 💖 The clay has to be entirely exposed to air while drying. If your piece has a flat back, you may use a mesh or silk screen to dry it. Flip the piece from time to time to prevent it from curving. If the piece is rounded, you may hang it or stick it to a stand if possible to keep its shape. :)
very helpful video and clear instructions 😊 i tried the cooked air dry clay version and the consistency is just as the video, however, while drying some holes appeared on my pieces (they are small pieces for jewelry) and one of them cracked, do you know why that happened? 🤔 thank you for the tutorial ❤
glad you find it helpful! not really sure but the holes are probably because of air bubbles stuck in the clay. you need to press it pretty hard while sculpting to get rid of those. cracking can be caused by several factors (like how the clay cured, condition of the clay, etc)
no cook method is really harder to use than the cooked one. it dries faster so you have to work pretty fast. you can soften it out by making a new mixture of the same ingredients and mix that with the hard clay. good luck!
Hey could anyone tell me that after shaping the clay and letting it sit in the air to dry up, it doesn’t catch any mold right ?if we don’t put it in the oven (just asking it to make sure if I should do it or not since I don’t have a baking oven and so ion wanna risk stuff )
no need to bake air dry clay. the vinegar should help prevent that from happening but you also need to store it properly. store your clays and finished pieces in a cool dry place/area
cracks can be caused by a lot of things but one of them is improper curing. i have another video on how to properly cure air dry clay. you can check that out and hope that helps!
Thank you this waaaas very helpful 🥺💙. I already try making a no cook clay but it is too sticky and somewhat melting... I used 3:1 ratio in which cornstarch is more dominant...what can I do? add more cornstarch? or glue? please help 💙🥺
I'm glad you find it helpful!! 💖 If it's kind of melting, I think you can add more cornstarch but add it in *very* small amounts and be careful not to add too much because then, you'd have to add glue and lotion and again, you have to be careful with that too. If it's too sticky, you need to add a tiny bit of oil/lotion as well. Hope that helps! 😁
yes you can use a tooth pick. for wood surfaces, it's best to use wood glue as it adheres stronger. for other surfaces like plastic or metal, you might want to try using industrial glue. make sure the clay is completely dry first before using industrial glue.
Hello, I have a small problem with the cooked clay. When I make a piece that's thick enough, say a cube with 0.5cm-1cm thickness, the top and/or bottom end that's supposed to be flat would look sunken when dried. Do you know what's causing this? Thanks in advance!
@@zainclayarts I did watch your video about curing the clay and I use silk screen like what you have to cure mine. I also did a test where I made 2 spherical pieces and I would flip one clay every 30mins or so while the other I didn't flip at all. I made the pieces the size of cranberries so they can hold their shape as they don't weight that much The one I flipped would cave in at every side that at some point was the bottom side, while the one I didn't flip only the bottom side caved in, the top stays spherical. So basically it caved in but upward because only the bottom side/ the sides that was the bottom at some point in time has this problem, which is really weird to me
Thank you 🇬🇧 very good tutorial.BUT a lot of Spanish people who have thier own shops use the no cook method they add a littler shower gel or dish soup .baby oil and lemon and thker clay and charms are fantastic 🇬🇧
can't say for sure since they both have pros and cons. which is better really depends on your preference and what works for you. in my opinion though, polymer clays can be more durable than air dry clays and they are waterproof once baked.
Dear Zain, I'm sorry if this question was asked previously. I have a huge problem with my clay, the consistency is perfect but... I always get hairs, fibres, dirt particles and yellowing in my clay. I cannot find any way to prevent that even if I cleaned my station and my hands are clean. Do you have any tips on this issue? Thank you!
Hi Boxxy! I have to be honest but that's also one of my biggest problems with working with clay. We got a lot of cats in our house and i have a shih tzu as well so furs are all over our house lol unfortunately, i dont really have any magic trick on keeping my clays clean. All I can say is, treat your work and your workspace as if you're a surgeon that'll be performing an operation. Make sure to clean everything you're going to touch (workspace, tools, etc) when working and don't touch anything else especially your clothes! The quickest solution I have though is to just paint over my pieces with acrylic paint when they still turn out too dirty/messy. :)
Hey! thank u so much for the recipes. I tried the cooked one, but my clay was not smooth. It was cracky and my hand get super oily while kneading the clay. what can i do not to fix it?
hm you might have added more oil than needed. maybe you can try adding glue to it and see if that works. add small amounts from time to time just to test it out first. let me know if it fixed the problem :)
Hi, i used 1:1 corn starch and glue but it's very sticky, not watery like yours. I think my glue is so solid. Can i ask how to fix it? Can i add water to it?
@@zainclayarts thanks for replying ❤ i meant the glue is very thick in the beginning, after cooked a while it would not sticky to the pan but after that it became very sticky and glue to every part of the pan. I'll try add more oil as your recommend. Thanks very much💖
Such a neat and well detailed video. Love it.. One doubt @zain clay arts.. can you please tell whether I can follow the same method but substitute corn starch with white cement? Also, will there be any reaction from white cemenr with vinegar? Please do reply 🤗
can't say since i haven't tried it. you probably have to adjust the ratio of ingredients. i suggest you test it out if you already have the white cement :)
![[OUTLINE] ADC101 Episode 2 Part 1 Coloring Air Dry Clay BEFORE Cooking!](http://i.ytimg.com/vi/HfxiRKOrwnY/mqdefault.jpg)
![[OUTLINE] ADC101 Episode 2 Part 1 Coloring Air Dry Clay BEFORE Cooking!](/img/tr.png)
FAQs page and Materials List are linked in the description!
Video Outline + Timestamps below! .+:｡(ﾉ･ω･)ﾉﾞ
00:00:00 - 00:00:50 - Intro
00:00:50 - 00:09:12 - Method 1: Cooked Air Dry Clay
00:06:26 - 00:09:00 - How to check the clay's consistency? + How to fix undercooked and overcooked clay
00:09:24 - 00:12:52 - Method 2: No Cook Air Dry Clay
00:12:52 - 00:19:52 - Cooked vs. No Cook Air Dry Clay (Texture, Color Handling, Workable time, Sculpting Quality, Drying/Curing time Comparison)
00:19:52 - 00:20:38 - Additional Tips
00:20:38 - 00:21:00 - Quick Summary (Which is better?)
00:21:00 - 00:22:06 - Outro
Thank you! 💚
Stay safe and stay crafty!
Your video is by far the CLEAREST video of all on TH-cam!! Thank you so much!
Wow! I'm glad you think of it that way haha Thank you for the feedback! It means a lot 💖💖
Is silver swan soy sauce allowed?
This might be one of the Best tutorial I've seen for diy air dry clay. You gave clear instructions and even told us how many days it takes for the clay to fully cure. I really liked how you compared both the cook and non-cook method with their pros and cons. You deserve more subs, there's no way you're this underrated!
Also, can you reduce the time or curing by using a hair dryer or some sort? I'm making a sculpture for my gf's project which is due on Tuesday. I'm planning on making the sculpture a bit big so i kinda worry it wouldn't cure on the day of submission.
thank you so much ronan! glad you appreciate it 💚
if its possible for you to use aluminum foil or paper as a base and just use clay on the surface of your sculpture that could help reduce the time it takes to cure.
putting my works in front of an electric fan helps it cure faster. using hair dryer sounds possible but not sure how well that works so i suggest you try that with a small amount of clay first.
What about shrinkage. My project completely shrunk and is very disappointing I used the no cook air dry clay.
Both will shrink. That's what happens with air dry clay, because during the drying process the liquid evaporates.
You’ll have to learn to approximate how much shrinkage your pieces experience and make them appropriately larger in size in order to get the size you want after they’ve dried completely :)
If a clay has water, it will inevitably shrink when it dries.
True@@firstlast-sq2gc
Thank you for showing the difference between the two clays. I’ve been looking online to figure out why clay is cooked and what the difference is but couldn’t find anything until I found your video. I’ll give it a try today! Blessings ❤️
good luck and happy claying! 💚
most clear tutorial and most informative video about homemade airdry clay
I love this video!! Such neat graphics and so helpful!!
Thank you so much for the feedback and the appreciation! 💖💕
Thank you. Clear, informative and you have a lovely voice and speak in such a nice manner❤
thank you. i needed to hear this 💚
The best air dry clay video I have ever seen!!! Thank you for all of the thought and time you put into this😊
thank you robyn 💖
Haven't watched anything quite this awful and u say it is good., she had her closeup way too far in
And the music I had to shut off. And I just had to stop half way in and refocus on it
Excellent video, both on video content and the way it was presented - not always a given in other similar videos of this genre I have watched. I have been looking for effective ways to make my own clay and this fits the bill. You have helped me on my project and gained a subscriber.
Thank you Stewart for the feedback! It means a lot :) I'm glad you find it helpful and thank you so much for subscribing! 💖
Bibili palang ako ng air dry clay ngayong 12:12 kasi wala pa akong budget for acrylic paint hahahahaha. Kapag nagtuloy-tuloy paggagawa ko itatry ko na to para makatipid ako. Thank you!! Ito ata ang pinakahelpful na napanood kong vid about ADC.
Thank you Eslyn! Glad you find this helpful 💖 Yes, making your own clay is a lot cheaper than buying especially if you happen to acquire cheaper materials! Happy claying! ✨
Amazing detailed video. Very clear explanations. I’m just a hobby crafter but I like to do things properly and your way seems really good. thank you.
Glad it was helpful!
Best DIY clay video I've seen! Thank you.
I've been wanting a air dry clay for a long time, I found one in the nearest stationary shop but it was a bit too expensive for me so I've wanted to make one myself and so this video is super useful
Hi. Can you use lemon juice instead of vinegar ? And I heard that air dry clay shrinks after its dried. Is it true ? Thank you for the video.
AMAZING YOUR VIDEO IS SO CLEAR... CONTINUE TO MAKE LIKE THIS CLEAR AND VERY EDUCATIONAL CONTENT
Hello, thank you very much for the awesome tutorial. I tried your recipe and even though it didn't pass the raindrop test, it dried really strong and could easily remedy the cracks and what not. My second batch became too soft and I made blocks of them at first, then made sculptures via carving. But I have a problem with molds during the rainy season here in the Philippines. I panicked and ended up throwing away my airdry sculptures and the few blocks I wanted to carve. How do I prevent molds from forming? Was there a way to remove the molds from the sculptures?
thank you! glad it worked well for you 😊
as for the molds, adding white vinegar or lemon juice should help prevent them. making sure your hands and anything that comes into contact with the clay is clean will prevent that from happening too. hope this helps!
im from ph too and never really experienced my clays getting molds even though they've been on storage for a long time. and unfortunately, you can't really save clays that already has molds. even if you remove them, they will just grow back :/
You mentioned (raindrop test) I don’t think these are for outdoors. U would have to seal them as well, and even though you seal them they should not be left out doors.
I've watched this twice, it is really helpful and well done. Thank you. And I understood every word. Your English is excellent.
Thank you so much Peter! Glad you find it helpful and you even watched it TWICE! 💕 Thank you thank you so much! I really appreciate the feedback. Stay safe! 😄
Can you use Tempera paints for coloring the clay?
Hello! I made the no-cook clay recipe and it turned out quite well! But when I added colour to it lots of little cracks formed (something like dry land which is dehydrated). Can u please tell me a solution if u know about it?
What kind of colour did u add?
sorry but that's also one of my problems when i used the no-cook recipe so i switched to the cooked method 😅
Wao.such a nice explanation of the benefits and side effects of air dry clay type.thankyou so much.I sm excited to start with my first home made clay.
thank you Ruchi and good luck! 😊
The video is very clear and easy to understand and it's packed with knowledge so thank you for that. I'm wondering if you can mix both clays? To get slightly different texture than pure cooked clay but also not loose it perks.
thank you! hm i dont think i've tried that yet..
Hey, the best video ive seen about this type of clay, i just tried the no Cook version but i dont understand why it hasnt the right consistancy, it cracks, doesnt makes the teardrop shape.. And it has this Sandy texture. I really measured all the ingredients i dont understand what i am doing wrong.
you may check the "how to check clay consistency part" i included fixes for such cases there. pls make use of the timestamps in the description or in the pinned comment. thank you :)
Hello can i ash which also you most preffered to use cooked or non cooked clay thank you💕
Hi, thanks so much for sharing. I follow your instructions and did make it work (cooked one). However my clay dries pretty fast, any suggestion to help it stay undried a bit longer?
some use a damp cloth to cover unused clay while they work. beware of lints though since they can get stuck in the clay. but if you're having problems with the clay you're actively sculpting with, i find it better to use slightly undercooked clay (be sure it's not super soft tho) as it will give you more time to work with (consider the shrinkage) or just use a bit of water to soften the clay every now and then.
@@zainclayarts thank you. I would try your suggestion
Me encantó como explicas y como quedan las arcillas. Me suscribí. Muchísimas gracias ♥️♥️🌹
I do reccomend also using oil based paint. That was the recommended one when I learned about this many years ago.
Yes, I've seen others use it however I believe water-based paints are less toxic than oil-based ones.
This is the best diy airdry clay vdo i have ever seen... thank you soo much❤
aww thank you Adrita! 💚
This is the best well planned video!! it answered all the questions that i had in mind
thank you 💚
Thank you for your excellent video! Enjoy it very much. Is there a difference between white glue and latex glue? Can i use normal whire glue instead of your type of glue?
hmm sorry im a bit confused bec i know what im using is also just a pva-based glue like other regular white glues out there. i am not familiar with latex glue
for the cooked method how do you prevent cracks as it dries?
Beautiful video! Which clay ks harder after fully drying?
hardness depends on the size and thickness and they both harden pretty well as you can see in the last part where i compared them. i'd say the cooked one seems more durable in general
@@zainclayartsthanks))
@@zainclayartsI have a serious question. When I made this clay once, I made the shape and let it dry, the side that was placed on the bottom (on the table) had small cracks. Is there any way to prevent this? To make it smooth everywhere?
@@katkaklarapaule5053 i have a video discussing how to properly cure adc. please check it out. it might help although cracking can be caused by other factors too.
@@zainclayartsHow much does cold porcelain shrinks when it dries?
What can be used in place of vinegar
lemon juice :)
Thank you for this video!! What do I do if the clay is sticky after it set? I've made on the stove and in the microwave and both was so sticky I couldn't get it out of the bag.
That means it's either really undercooked, or the ratio of starch:glue is incorrect. Just kneed more starch into it, or cook it a little more and you should be all set
The perfect vid i found today all over the internet love it!!
aww thank you so much! 💖 that makes me happy 😊
Excellent video on air dry clay , both methods have been described in a very simple and clear manner…. I want to ask which clay shrinks in size ?
Both
this is such a great video! i do have a question though- will i be able to paint over already dried clay with acrylic paint and how well will the paint stay on?
yes you absolutely can! you just have to use a sealer/varnish to make the paint last. i have a list of materials i use linked in the description.
I had a question regarding water you said we can use water to smooth the surface of the clay but i saw another video in which she uses same method and she said not to use water because it is biodegradable clay and it can get molds on it so should I use water or not
molds are tricky and no one really knows what causes it since several factors come into play like humidity, weather conditions, how it's stored and more. it rlly varies since we all live differently and in diff areas. personally, i never experienced my clay getting molds and i use water a lot while sculpting. the vinegar i use for my diy clay helps prevent it too. most ppl suggests using distilled but i just use tap water with no problems.
@@zainclayarts thanks a lot it really helped. ｡◕‿◕｡
What a brilliant and lovely tutorial, thank you! I'm thinking about making a square plant pot, do these clays dry flat when rolled thin (maybe ½-1cm), or does it bow/curl?
thank you Rachel! glad you appreciate it 💖 i don't really recommend using air dry clay for plant pots or anything with moisture since it's possible that the clay might soften even if it's sealed. however, you can use it as an outer layer or for decoration for like a plastic pot for example.
to answer your question though, yes it can dry flat but it depends on the way you let it cure. make sure to flip it several times to let all areas get exposed to air while it's drying.
@@zainclayarts perfect, thank you! My plan is to use it as an "outer"; have a pot inside it, and possibly even glue a thick plastic bag inside
in that case, be sure to get rid of air bubbles and be on the lookout for some cracking due to shrinkage. good luck on your project! hope it'll turn out great 😊
Can you suggest, which clay is best for jewelry making
Hi, just a quick question. Thank you for the brilliant tutorial, but, I have been making a polymer air dry "picture" which will be attached to slate.
I did not add colour as I made it, as I wanted to be able to paint shades, making it "pop" out.... is this ok to do? I have a varnish made for polymer to complete it.
Should I continue, or start again with mixing the colours to clay before shaping it? Thanks
yes that's totally fine! for the varnish though, i think it's best to search if your varnish is compatible with the paint you're using coz sometimes varnishes can dissolve the paint and smudge it all over :)
Thank you for a great tutorial. How durable is it and can I use it in silicone molds? Thank you.
thick pieces made with this clay are pretty durable. if you can add some kind of base or support inside, that will make your pieces much more durable. and yes, you can use them with silicone molds. apply oil on the molds so it wont stick
If I would like to use the sculpted clay on another media such as paper maché would it be possible to glue it with hot glue?
Sorry, I'm quite not sure I get what you mean.. However if you mean that you want to use this kind of clay together with paper mache, I think white glue would work just fine since white glue is also the binding agent for this recipe. Not sure with hot glue as I haven't tried it myself. :)
Thank you. I will try with PVA glue first
@@marlenejacopin8142 Good luck! 😊
Thank you. Lovely tutorial❤❤❤ Extremely methodical approach. Truly a commendable job.👌👍👏
Want to know the percentage of shrinkage once dry.
shrinkage is around 10-20%
talked about this more in detail in my 'how to properly cure air dry clay' video 😊
@@zainclayarts Thank you. I will check the mentioned video.
once dry, can you sand it. I'm willing to do a mini sculpture, but I wonder if you can sand it for a smoother effect.
yes you can but be careful not to do wet sanding. the clay will soften when wet and it might ruin your piece.
@zainclayarts thank you very much, I'm glad to hear that. 🙏🏻💕
Easy to follow tutorial. Can i ask, is it ok to add color like blue, red etc. before you cook it?
yes! the next video i made for this series is about that actually (coloring air dry clay before cooking). you can check it out if you like :)
Can i use any glue? Like the ones that are used for woods or cloths or should i use only the school glue?
using wood glue should work. not sure about fabric glue or other ones
Thankyou so much. I made my clay but it was breaking this video helped alot. I will definitely try
Thank you Fahira! Good luck and happy claying! 😄
What's the shelf life of cooked clay??
If i also put resin on my clay art, would it keep it good as well? By the way you are awesome for doing the video!
havent tried it myself but i believe yes :) thank you, glad you liked it!
Hi. I came across another how to video accidentally, so I watched and tried it for 1st time tonight. It did not come out right at all. Ingredients were not for cornstarch but chalk powder and no vinegar. It was so soft, wouldn't come out of my mould!! Can I save it or through away and start over is only option?? Spent so much $ on chalk stuff already.. it's just flopping downwards on the table. What am I doing wrong miss?
Hey there! I was just wondering if you can substitute cornstarch with flour? Will it affect the results? Thank you so much ^^
Flour and cornstarch have a hugeeeee difference between eachother. Flour can grow moldy and stinky very fast, and it cooks differently.
Thank you for explaining the difference from cooked and none cooked 😃
Thank you!
This video is AMAZING 🤩
Hi dear i am from India
I liked your videos very much
I could not understand english perfectly, but I got a lot of help from subtitles.
Thank you for this video... can you let me know about shrinkage with both...
amount of shrinkage mostly depends on how wet the clay is for both versions. generally, both can shrink for about 10-20% 🙂
Thank you for putting the full list of measurements for making both the white clays, onto the internet via TH-cam. This video has helped me a whole lot. I really look forward to creating some wonderful things with my grandchildren using the clay.
I have a few questions for you:-
1) Do you suggest only creating small projects with the air dry clay..or can you do larger projects, such as vases, in air dry clay?
2) Do you advise on adding the poster paint to the air dry clay only when I plan to use the clay immediately?
3) Is it safe to seal the finished objects I make out of both types of clay by using a glaze only, or should I seal the object first with a spray on sealant, and then glaze it; if I wanted it to hold water for example?
Thank you in advance for answering these questions. You are very kind!
Thank you so much Carly for a wonderful feedback! I'm glad you find it helpful 😊 To answer your questions,
1. I personally use it for small projects but I believe you can use it to make larger ones! It holds pretty well especially if the piece is solid. Might take awhile to completely cure it though so might be better to work on it in stages.
2. Yes, definitely. unless you can secure it in a completely airtight container which may allow you to store it for a long time. It will harden quite fast after it's mixed with any paint.
3. I haven't used this clay for any purpose involving water but I've read from other artists that air dry clay in general, no matter the type, is really not advisable to be used with anything that involves water like a pot or a vase even though it's already sealed with glaze or coated with varnish. The clay may turn soft again after awhile.
@@zainclayarts Thank you so much Zain. You are very kind to get back to me so quickly. Do you have any large projects coming up? A thought of mine was to make a nativity set and/farm yard set for my grandaughter. We could play together if it works. I shall be experimenting with different things to make the farm stables or the stable where Jesus was born for her. I thought she might like them, one or the other for Christmas. Shes only 4 years old and I know she would love to make the baby Jesus or the farmer and his wife for the farm yard. She is into arts and crafts which is brilliant because so am I!😁😀😄
@@carlycharlesworth1497 So far, I'm just planning to finish all my works in progress which are mostly character figures like the Sailor Moon I did :) I also decided to skip making any Christmas content since I currently don't really have a lot of time to make something and go through the entire process including editing. 😓
That idea is really cute!! You can try to incorporate other materials along with the clay to make it more realistic if you like. I wish I have someone to make things with haha I hope your granddaughter will enjoy claying too. And if it's alright, I'd love to see your works when you're done! I'd love to share it to others by featuring it in one of my videos as well 😁💕
@@zainclayarts oh how kind of you. I dont know if I would have the confidence to show anything I made but feel free to use the idea for yourself sometime. It would make a great video if you just built the stable in one video and some of the characters perhaps over two or three videos. I would absolutely watch that for sure. Maybe out it to the vote one year. I debated creating the stable out of a cardboard shoe box and coloured paper and some acrylics. I was planning to use strips of fabric to make the characters clothes and make a star out of cardboard, tinsel and a battery run candle. However, I have yet to successfully make the clay yet hahaha. Big dreams but I really want to try. It will be fun just to give it a go. I think i just need the cornflour and that's it. I will have to get my husband to pick me up some. I'm disabled and house bound at present you see. I'm sorry, i'm chattering on. Forgive me. It's been really lovely speaking with you tho. Thank you for your very kind offer. You seem like such a very kind person. Are you on messenger at all, perhaps we could chat on there? Or am I asking impertenant question of you? It's ok to tell me no..I will totally understand. God bless you.
@@carlycharlesworth1497 That's completely alright! I understand. There was also a time that I wasn't totally confident in sharing my works online but I thought, it wouldn't really hurt to try :) Now, I'm just glad that some people appreciate what i make and do. And yes, you're right! I'll consider making it for next year 😊 It might take awhile to finish but I hope you'll be able to finish it while enjoying the process! And no worries!! I do have a facebook page. facebook.com/zain.clayarts You may message me there if you'd like and we can talk about anything :) Though I might not be able to always reply on time but I do try whenever I'm free. I'm just on TH-cam now since I use it to play music haha
Hey Miss Zainy! 😉 Thank you so much for this video. It's very thorough with a lot of good information. You are naturally skilled at teaching. I had absolutely no problem understanding you. You speak very well, clearly, with good expression/modulation, and at a good pace. Your English is great. Your sense of humor is enjoyable.
Aww thank you so much Janet for such a detailed feedback 💖💖 I had to revise it a couple of times to make it concise and informative so your feedback makes me feel glad that it is understandable enough 💕
@@zainclayarts
You're welcome! Your work is well done and I hope to see more.
@@creativeplanetjanet thank you!! 💖
Very informative. My clay got overcooked and rubbery. Same quantity undercooked clay should be used to rectify it ??
that depends on how dry your overcooked clay is. if you're unsure, there's really no harm in mixing a lot of undercooked clay with it. your clay will just be softer and you can just air dry it a little to get the right consistency.
Hello, I watched your video and it seems your video has the most when it comes to troubleshooting. I tried this out and made a couple of batches of different colors. Some of them would dry with little dips and made the shape all wonky. Do you maybe know the reason why that is? Did I not knead it enough for even distribution of starch? Or maybe my starch proportion was off? Thanks for the video
hmm probably because of trapped air in the clay? when shaping your piece make sure to push it hard so that the trapped air can get out.
@@zainclayarts thanks for replying, I'll try that out! Your figurines look so good and detailed
@@Avanity1 thank you and hope my suggestion helps 😊
If we have to use stainless steel hoops after the clay dries up... Then do we have to stick them with glue? Then which glue should we use?
cyanoacrylate glue or epoxy glue
Hi.. Nice n well explained tutorial. I have a doubt, the clay I made is little translucent when it gets dried. How to get opaque white clay?
Cold porcelain dries translucent, you can add white paint to it.
Thank you! Yes, @Farheen Yaseen is right. This type of clay is translucent when it dries. You may use acrylic paint or poster paint to add color to it. Just mix it directly with the clay after it's set.
In the end, what did you mean by "curing it"? After im done making my sculptures csn i just leave it out in yhe sun? Great video by the way!!
You can just leave it wherever as long as it's exposed to air and that will cure it/harden it! i have another video on how to properly cure adc. you might want to check that out :) thanks for watching!
❤ thank you😊 I am new so this video vas very helpful. What kind of clay will you recomand for small dollsface? With love from Norway 😊
glad you find it helpful! 💚 i use cooked clay for making my figures so that's what i recommend. but do consider the drying time of the clay when working with small pieces
Thank you❤
Hi , how do you make these amazing video animations please ?
Great video! When do you use hand lotion....on hands only or in mixture? Was not clear.
hands only. it's just to prevent the clay from sticking
Tysm! I coudnt find the comparison anywhere, and I really needed it, also I like the way you made the video, it was very informative and I liked the graphics very much.
I just want to ask one question tho, im making, pendants with my bff and I wanted to ask which is thr best for making them, cooked or non- cooked clay?
Thankyou!
Hi Navya! I'm not quite sure if you've watched the summary part but I already mentioned there that cooked clay is "generally" better. There's also a comparison part between the two which shows and explains the differences and why cooked clay is better. Please watch those parts for more info. Timestamps are available in the description and pinned comment. Thank you! :)
@@zainclayarts I did watch them, but it seems i missed the summary , btw I made the cooked clay and it turned out great! Thankyou
@@creativeteeny925 That's great! Glad you find the video helpful and thanks for watching 😊
Hello! 👋🏻
Thankyouuuu for this wonderful tutorial ♥️
But can i ask?
Can i bake it?
pls read the FAQs page , link in the description :)
Thank you for this amazing video!❤
I tried this today and to be clear, the tear drop shape is to be formed soon after kneading or after placing a few hours...?
after letting it set for a few hours or overnight
Can I do this method in making ceramic toys that are for painting?
of course! but this clay is not ceramic just to make that clear
Can I make a batch and then store if for later use?
Or should I make a batch right before the day i want make my doll?
yes you can store it for later use. just make sure to use an air tight container
@@zainclayarts THANK YOUUUUUU
You have tell us each and every method and querys that we have thank you 😊😊❤
Hi, Loved the tutorial. Had no idea what the differences where between cooked and non-cooked. You explained things very well. I do have a question, does either one shrink considerably after dried?
shrinkage depends on how much moisture is left in the clay after you sculpted it so i dont think any of them shrinks more than the other. generally, adc shrinks about 10-20%.
@@zainclayarts Thanks, already made my first batch. Can't wait to get started.
Very nice and precise video. Thank you for this. I tried the cooked clay and while drying the sculpt is getting curved. How do I get that fixed.
Thank you so much! 💖 The clay has to be entirely exposed to air while drying. If your piece has a flat back, you may use a mesh or silk screen to dry it. Flip the piece from time to time to prevent it from curving. If the piece is rounded, you may hang it or stick it to a stand if possible to keep its shape. :)
Hello could you use fabric paint as colouring? Thank you.
haven't tried it but i think you can. i suggest trying it with a small batch of clay and see how well it works :)
very helpful video and clear instructions 😊 i tried the cooked air dry clay version and the consistency is just as the video, however, while drying some holes appeared on my pieces (they are small pieces for jewelry) and one of them cracked, do you know why that happened? 🤔
thank you for the tutorial ❤
glad you find it helpful! not really sure but the holes are probably because of air bubbles stuck in the clay. you need to press it pretty hard while sculpting to get rid of those. cracking can be caused by several factors (like how the clay cured, condition of the clay, etc)
@@zainclayarts ohhh i see, i will try that. thank you 😄😄
Your videos r amazing... I tried non cook clay method, but it's hard n give suggestions for that... Teardrop shape is not coming correctly..
no cook method is really harder to use than the cooked one. it dries faster so you have to work pretty fast. you can soften it out by making a new mixture of the same ingredients and mix that with the hard clay. good luck!
@@zainclayarts thank u so much for ur Rply... Ur stuffs r really awsm.. Really happy for ur quick response 💕
@@lekhaalagaraja9800 thank youu!! 💖💖
same for me... give suggestions pls
Hey could anyone tell me that after shaping the clay and letting it sit in the air to dry up, it doesn’t catch any mold right ?if we don’t put it in the oven (just asking it to make sure if I should do it or not since I don’t have a baking oven and so ion wanna risk stuff )
no need to bake air dry clay. the vinegar should help prevent that from happening but you also need to store it properly. store your clays and finished pieces in a cool dry place/area
Can you use the air dry clay to smooth a thin layer over paper mache, to give a smoother finish?
if it's just a shallow groove, i believe yes, it can work.
@@zainclayarts Thank you so much. I'll give it a try
how will i avoid cracks in the drying process
it always crack when i left in open area to dry
cracks can be caused by a lot of things but one of them is improper curing. i have another video on how to properly cure air dry clay. you can check that out and hope that helps!
Hi... i know i am late but just a question can we use lemon juice insted of vinegar?.?.?
I wish you will answer...
And
Can we use maida insted of cornstarch
Because we dont use cornstarch in our house
heyy i know cornstarch is important but is there anything which could be a replacement for it ? amazing video by the way!
sorry not sure. haven't tried to use anything other than cornstarch
Thank you this waaaas very helpful 🥺💙. I already try making a no cook clay but it is too sticky and somewhat melting... I used 3:1 ratio in which cornstarch is more dominant...what can I do? add more cornstarch? or glue? please help 💙🥺
I'm glad you find it helpful!! 💖 If it's kind of melting, I think you can add more cornstarch but add it in *very* small amounts and be careful not to add too much because then, you'd have to add glue and lotion and again, you have to be careful with that too. If it's too sticky, you need to add a tiny bit of oil/lotion as well. Hope that helps! 😁
@@zainclayarts Wooah I did add small amount and carefully of cornstarch... and it's better than it's first consistency! 💙. Thank you 😘💙💙💙
@@secret3576 good to hear!! happy claying! 😁
Can i use flour to make no cook method clay ?? Please say
Hey, I made Thai clay using Fevicol DDL binder. It’s stretchy like a slime. Can you help me
hi! sorry but im not really familiar with thai clay nor fevicol 😅
Hello can I use clear glue instead of white glue, because it’s hard to find white glue near my place 😅
i think it's possible but not sure if the ratio is gonna be the same
How to stick on a surface? Wasn't to make a small tree form with this. Can we put a tooth pick inside this to stand it straight? Please reply
yes you can use a tooth pick. for wood surfaces, it's best to use wood glue as it adheres stronger. for other surfaces like plastic or metal, you might want to try using industrial glue. make sure the clay is completely dry first before using industrial glue.
Hello, I have a small problem with the cooked clay. When I make a piece that's thick enough, say a cube with 0.5cm-1cm thickness, the top and/or bottom end that's supposed to be flat would look sunken when dried. Do you know what's causing this? Thanks in advance!
maybe it's bec of how you're curing it? pls watch my how to properly cure adc video and see it that helps
@@zainclayarts I did watch your video about curing the clay and I use silk screen like what you have to cure mine. I also did a test where I made 2 spherical pieces and I would flip one clay every 30mins or so while the other I didn't flip at all. I made the pieces the size of cranberries so they can hold their shape as they don't weight that much
The one I flipped would cave in at every side that at some point was the bottom side, while the one I didn't flip only the bottom side caved in, the top stays spherical.
So basically it caved in but upward because only the bottom side/ the sides that was the bottom at some point in time has this problem, which is really weird to me
Thank you 🇬🇧 very good tutorial.BUT a lot of Spanish people who have thier own shops use the no cook method they add a littler shower gel or dish soup .baby oil and lemon and thker clay and charms are fantastic 🇬🇧
ohh i see. that's good to know! thanks for sharing 😊
thanks for this very elaborate tutorial~ may I ask if diy cooked air dry clay better than polymer clays bought from stores? thanks
can't say for sure since they both have pros and cons. which is better really depends on your preference and what works for you. in my opinion though, polymer clays can be more durable than air dry clays and they are waterproof once baked.
Dear Zain, I'm sorry if this question was asked previously. I have a huge problem with my clay, the consistency is perfect but... I always get hairs, fibres, dirt particles and yellowing in my clay. I cannot find any way to prevent that even if I cleaned my station and my hands are clean. Do you have any tips on this issue? Thank you!
Hi Boxxy! I have to be honest but that's also one of my biggest problems with working with clay. We got a lot of cats in our house and i have a shih tzu as well so furs are all over our house lol unfortunately, i dont really have any magic trick on keeping my clays clean. All I can say is, treat your work and your workspace as if you're a surgeon that'll be performing an operation. Make sure to clean everything you're going to touch (workspace, tools, etc) when working and don't touch anything else especially your clothes! The quickest solution I have though is to just paint over my pieces with acrylic paint when they still turn out too dirty/messy. :)
How do you not make the clay smell like vinegar? Or how do you mask the smell?
normally the smell of the baby oil balances the smell but you can use lemon juice instead
Hi , i made the clay and was really good. However i kept the clay for few weeks and it became a Lil hard. Is there any way I can use it?
you can try softening the clay. i have 2 tutorials on my channel for that
My white glue is very thick it's very difficult to mix it with corn starch can I add water in it and mix it before adding in corn starch???
if you're going to cook it, i think you can. not quite sure if you're going for the uncooked one.
@@zainclayarts I am going to cook.
Hi! Is there any chances that clay dries in foamy like texture? Thanks for ur response
yes, super light air dry clay is like that
Do u have super light airdry clay tutorial?
currently, none
Bạn có thể trả lời tôi tại sao đất sau khi nấu, khi khô, rất dễ vỡ?
Hey! thank u so much for the recipes. I tried the cooked one, but my clay was not smooth. It was cracky and my hand get super oily while kneading the clay. what can i do not to fix it?
hm you might have added more oil than needed. maybe you can try adding glue to it and see if that works. add small amounts from time to time just to test it out first. let me know if it fixed the problem :)
@@zainclayarts thank you. 😊 I added glue to the mixture and I think it's better now.
Hi, i used 1:1 corn starch and glue but it's very sticky, not watery like yours. I think my glue is so solid. Can i ask how to fix it? Can i add water to it?
i think your clay is fine. it shouldn't be watery at all. maybe add a bit more oil to balance the stickiness? just a tiny tiny amount
@@zainclayarts thanks for replying ❤ i meant the glue is very thick in the beginning, after cooked a while it would not sticky to the pan but after that it became very sticky and glue to every part of the pan. I'll try add more oil as your recommend. Thanks very much💖
Such a neat and well detailed video. Love it..
One doubt @zain clay arts.. can you please tell whether I can follow the same method but substitute corn starch with white cement? Also, will there be any reaction from white cemenr with vinegar?
Please do reply 🤗
can't say since i haven't tried it. you probably have to adjust the ratio of ingredients. i suggest you test it out if you already have the white cement :)
Thank u sooo muchhh this helped soo much! I just started sculpting as my hobby! :) 💞
nicee! have fun sculpting!!